DANA Split bearing eye - series 498

DANA Split bearing eye – series 498

Three operating angle versions for maximum torque or maximum bearing life capacity
Split bearing eyes with toothed bearing cap
Standard Hirth-serrated flange

Category: DANA

Description

DANA Split bearing eye - series 498

DANA Split bearing eye - series 498

DANA Split bearing eye – series 498

Feature | DANA Split bearing eye 498

Operating angle up to 15°
Each driveshaft size has a specific hole pattern (see table).
Other hole patterns available on request.
Torque Range TCS : From 1880 to 15000kNm
Flange diameter : From 600mm to 1200mm
Field of application
- Main rolling mill drive units
- Heavy machinery construction plants

Shaft Specifications | DANA Split bearing eye 498

ตารางสเปค 498.00 - 498.15 (Specification 498.00 - 498.15)

Shaft size		498.00			498.05			498.10			498.15
T_CS	kNm	1,880	1,620	1,430	2,340	2,080	1,750	3,00	2,600	2,200	3,640	3,100	2,700
T_DW	kNm	900	780	680	1,120	1,00	840	1,430	1,250	1,050	1,750	1,500	1,300
L_c	–	0.115	0.144	0.154	0.224	0.322	0.343	0.530	0.684	0.720	1.09	1.35	1.43
–	–	x 10⁶	x 10⁶	x 10⁶	x 10⁶	x 10⁶	x 10⁶	x 10⁶	x 10⁶	x 10⁶	x 10⁶	x 10⁶	x 10⁶
β	<) °	5	15	15	5	10	15	5	10	15	5	10	15
A	mm	600			650			700			750
K	mm	600			650			700			750
B	mm	555			605			655			695
G	mm	75			80			90			95
H	mm	26			26			26			32
I¹)	–	20			20			24			24
M	mm	370	370	390	390	390	410	420	420	440	460	460	480

ตารางสเปค 498.20 - 498.35 (Specification 498.20 - 498.35)

Shaft size		498.20			498.25			498.30			498.35
T_CS	kNm	4,420	3,800	3,300	5,300	4,500	4,050	6,300	5,400	4,700	7,400	6,500	5,600
T_DW	kNm	2,120	1,850	1,600	2,550	2,200	1,950	3,050	2,650	2,250	3,500	3,100	2,700
L_c	–	1.69	2.14	2.55	3.26	4.01	4.681	7.05	7.86	8.29	9.71	10.7	14.24
–	–	x 10⁶	x 10⁶	x 10⁶	x 10⁶	x 10⁶	x 10⁶	x 10⁶	x 10⁶	x 10⁶	x 10⁶	x 10⁶	x 10⁶
β	<) °	5	15	15	5	10	15	5	10	15	5	10	15
A	mm	800			850			900			950
K	mm	800			850			900			950
B	mm	745			785			835			885
G	mm	100			105			110			120
H	mm	32			38			38			38
I¹)	–	24			24			24			24
M	mm	480	480	500	530	530	555	555	555	580	580	580	610

ตารางสเปค 498.40 - 498.60 (Specification 498.40 - 498.60)

Shaft size		498.40			498.45			498.50			498.55			498.60
T_CS	kNm	8,700	7,500	6,500	10,000	8,700	7,500	11,500	10,000	8,600	13,200	11,400	9,900	15,000	13,000	11,200
T_DW	kNm	4,200	3,600	3,100	4,800	4,200	3,600	5,500	4,800	4,100	6,300	5,500	4,700	7,200	6,200	5,400
L_c	–	16.1	17.4	23.78	24.4	28.71	38.73	36.4	42.63	61.67	56.3	70.8	96.19	89.9	102	147.2
–	–	x 10⁶	x 10⁶	x 10⁶	x 10⁶	x 10⁶	x 10⁶	x 10⁶	x 10⁶	x 10⁶	x 10⁶	x 10⁶	x 10⁶	x 10⁶	x 10⁶	x 10⁶
β	<) °	5	10	15	5	10	15	5	10	15	5	10	15	5	10	15
A	mm	1,000			1,050			1,100			1,150			1,200
K	mm	1,000			1,050			1,100			1,150			1,200
B	mm	925			975			1,025			1,065			1,115
G	mm	125			130			135			140			150
H	mm	44			44			44			50			50
I¹)	–	20			20			20			20			20
M	mm	625	625	655	645	645	675	670	670	700	715	715	745	740	740	775

ติดต่อแผนก HYDRAULIC

Hydraulic Department