DANA Orbital Motor – HT series

Orbital motors with high performance squared stator roller set, separately driven and hydrostatically balanced valve plate and tapered roller bearings.

DANA Orbital Motor - HT series

DANA Orbital Motor – HT series

Features | DANA Orbital Motor HT

The design solutions used in this model allow to reach pressures up to 280 bar [4060 psi] and power up to 40 kW [53.6 hp]. These motors are suitable for applications where high torque, continuous duty or frequent inversions of the sense of rotation are required.

Technical | DANA Orbital Motor HT

Motor	Displacement cm³/giro [in³/rev]	Max. input pressure bar [psi]		Max. differential pressure bar [psi]		Max. torque* Nm [lbf•ft]		Max. flow l/min [U.S. gpm]		Max. speed rpm		Max. power kW [hp]
HT 160	161.1 [9.8]	Cont	210 [3045]	Cont	200 [2900]	Cont	470 [346.3]	Cont	100 [26.4]	Cont	625	Cont	27.5 [36.8]
		Int¹⁾	250 [3625]	Int¹⁾	240 [3480]	Int¹⁾	560 [412.7]	Int¹⁾	125 [33]	Int¹⁾	780	Int¹⁾	32 [42.8]
		Peak²⁾	300 [4350]	Peak²⁾	280 [4060]	Peak²⁾	660 [486.4]
HT 200	201.4 [12.2]	Cont	210 [3045]	Cont	200 [2900]	Cont	590 [434.8]	Cont	125 [33]	Cont	625	Cont	33.5 [44.8]
		Int¹⁾	250 [3625]	Int¹⁾	240 [3480]	Int¹⁾	710 [523.2]	Int¹⁾	150 [39.6]	Int¹⁾	750	Int¹⁾	40 [53.6]
		Peak²⁾	300 [4350]	Peak²⁾	280 [4060]	Peak²⁾	820 [604.3]
HT 250	251.8 [15.3]	Cont	210 [3045]	Cont	200 [2900]	Cont	730 [538]	Cont	125 [33]	Cont	500	Cont	33.5 [44.8]
		Int¹⁾	250 [3625]	Int¹⁾	240 [3480]	Int¹⁾	880 [648.5]	Int¹⁾	150 [39.6]	Int¹⁾	600	Int¹⁾	40 [53.6]
		Peak²⁾	225 [3285]	Peak²⁾	200 [2900]	Peak²⁾	60 [44.2]
HT 315	326.3 [19.9]	Cont	210 [3045]	Cont	200 [2900]	Cont	950 [700.1]	Cont	125 [33]	Cont	380	Cont	33.5 [44.8]
		Int¹⁾	250 [3625]	Int¹⁾	240 [3480]	Int¹⁾	1140 [840.1]	Int¹⁾	150 [39.6]	Int¹⁾	460	Int¹⁾	40 [53.6]
		Peak²⁾	300 [4350]	Peak²⁾	280 [4060]	Peak²⁾	1330 [980.2]
HT 400	410.9 [25.06]	Cont	210 [3045]	Cont	180 [2610]	Cont	1080 [795.9]	Cont	125 [33]	Cont	305	Cont	30 [40.2]
		Int¹⁾	250 [3625]	Int¹⁾	210 [3045]	Int¹⁾	1260 [928.6]	Int¹⁾	150 [39.6]	Int¹⁾	365	Int¹⁾	35 [46.9]
		Peak²⁾	300 [4350]	Peak²⁾	240 [3480]	Peak²⁾	1440 [1061.2]
HT 500	523.6 [31.9]	Cont	210 [3045]	Cont	160 [2320]	Cont	1220 [899.1]	Cont	125 [33]	Cont	240	Cont	26.5 [35.5]
		Int¹⁾	250 [3625]	Int¹⁾	180 [2610]	Int¹⁾	1370 [1009.6]	Int¹⁾	150 [39.6]	Int¹⁾	285	Int¹⁾	30 [42.2]
		Peak²⁾	300 [4350]	Peak²⁾	210 [3045]	Peak²⁾	1600 [1179.2]

¹⁾ Intermittent duty must not exceed 10% each minute.
²⁾ Peak duty must not exceed 1% each minute.

Motor	Max. Outlet pressure with drian line (cont.) bar [psi]		Max starting pressure with no load bar [psi]	Min starting torque Nm [lbf•ft]			Min. speed [rpm]
HT 160	Cont	140 [2030]	10 [145]	At max. △p	Cont	340 [250.5	10
	Int¹⁾	175 [2537]			Int¹⁾	410 [302.1]
	Peak²⁾	210 [3045]
HT 200	Cont	140 [2030]	10 [145]	At max. △p	Cont	430 [316.9]	9
	Int¹⁾	175 [2537]			Int¹⁾	520 [383.2]
	Peak²⁾	210 [3045]
HT 250	Cont	140 [2030]	10 [145]	At max. △p	Cont	530 [390.9]	8
	Int¹⁾	175 [2537]			Int¹⁾	630 [464.3]
	Peak²⁾	210 [3045]
HT 315	Cont	140 [2030]	10 [145]	At max. △p	Cont	740 [545.3]	7
	Int¹⁾	175 [2537]			Int¹⁾	890 [655.9]
	Peak²⁾	210 [3045]
HT 400	Cont	140 [2030]	10 [145]	At max. △p	Cont	840 [619]	6
	Int¹⁾	175 [2537]			Int¹⁾	970 [714.8]
	Peak²⁾	210 [3045]
HT 500	Cont	140 [2030]	10 [145]	At max. △p	Cont	950 [700.1]	5
	Int¹⁾	175 [2537]			Int¹⁾	1060 [781.2]
	Peak²⁾	210 [3045]