SMC - Controllers / Drivers
SMC – Controllers / Drivers มีทั้งหมด 13 รุ่น แต่ละรุ่นมีขนาด, คุณสมบัติ และการใช้งานที่แตกต่างกันออกไป
1. Step Data Input Type Controller JXC51/61
Features | Step Data Input Type Controller JXC51/61
- The controller is already set with the data of the actuator. (The actuator and controller are provided as a set.)
- Easy operation and simple setting: Easy mode, Detail setting: Normal mode
- Teaching box, controller setting software
Specifications | Step Data Input Type Controller JXC51/61
| Type | Series | Compatible motor | Power supply voltage | Parallel I/O Input | Parallel I/O Output | Number of step data |
|---|---|---|---|---|---|---|
| Step data input type | JXC51 / 61 | Step motor (Servo / 24 VDC) |
24 VDC ±10% | 11 (Photo-coupler isolation) |
13 (Photo-coupler isolation) |
64 points |
2. Step Motor Controller JXCE1 / 91 / P1 / D1 / L1 / M1
SMC – Step Motor Controller JXCE1 / 91 / P1 / D1 / L1 / M1
Features | Step Motor Controller JXCE1 / 91 / P1 / D1 / L1 / M1
- EtherCAT, EtherNet/IPTM, PROFINET, DeviceNeTM, IO-Link, and CC-Link compatible
- Two types of operation command: Step no. defined operation, Numerical data defined operation
- Transition wiring of communication cables
- Numerical monitoring available
- IO-Link communication can be performed.
Specifications | Step Motor Controller JXCE1 / 91 / P1 / D1 / L1 / M1
| Series | Compatible motor | Power supply voltage | Fieldbus |
|---|---|---|---|
| JXCE1 | Step motor (Servo / 24 VDC) |
24 VDC ±10% |
EtherCATTM |
| JXC91 | Step motor (Servo / 24 VDC) |
24 VDC ±10% |
EtherNet/IPTM |
| JXCP1 | Step motor (Servo / 24 VDC) |
24 VDC ±10% |
PROFINET |
| JXCD1 | Step motor (Servo / 24 VDC) |
24 VDC ±10% |
DeviceNetTM |
| JXCL1 | Step motor (Servo / 24 VDC) |
24 VDC ±10% |
IO-Link |
| JXCM1 | Step motor (Servo / 24 VDC) |
24 VDC ±10% |
CC-Link |
3. Programless Controller LECP1
SMC – Programless Controller LECP1
Features | Programless Controller LECP1
- No programming required Capable of setting up an electric actuator operation without using a PC or teaching box
- Speed/acceleration 16-level adjustment
- Compatible with actuators with locks
- 3-level pushing force settings
Specifications | Programless Controller LECP1
| Type | Series | Compatible motor | Power supply voltage | Parallel I/O Input | Parallel I/O Output | Number of step data |
|---|---|---|---|---|---|---|
| Programless type | LECP1 | Step motor (Servo / 24 VDC) |
24 VDC ±10% |
6 (Photo-coupler isolation) |
6 (Photo-coupler isolation) |
14 points |
4. With Input Signals to Perform Jog Operations Step Motor Controller LECP1-XB182
SMC – With Input Signals to Perform Jog Operations Step Motor Controller LECP1-XB182
Features | With Input Signals to Perform Jog Operations Step Motor Controller LECP1-XB182
- Jog operation can be performed using parallel input signals. Jog operations that could previously only be performed using the button on the front face can now be performed using the ON/OFF status of the input signal.
- Application Examples Optimal for adjusting the feed value using a button operation while checking the motion of the actuator
Specifications | With Input Signals to Perform Jog Operations Step Motor Controller LECP1-XB182
| Type | Series | Compatible motor | Power supply voltage | Parallel I/O Input | Parallel I/O Output | Number of step data |
|---|---|---|---|---|---|---|
| With input signals to perform jogoperations | LECP1-XB182 | Step motor (Servo / 24 VDC) |
24 VDC ±10% |
6 (Photo-coupler isolation) |
6 (Photo-coupler isolation) |
2 points |
5. Programless Controller (With Stroke Study) LECP2
SMC – Programless Controller (With Stroke Study) LECP2
Features | Programless Controller (With Stroke Study) LECP2
- End to end operation similar to an air cylinder
- Positioning of 2 stroke end points + 12 intermediate points
Specifications | Programless Controller (With Stroke Study) LECP2
| Type | Series | Compatible motor | Power supply voltage | Parallel I/O Input | Parallel I/O Output | Number of step data |
|---|---|---|---|---|---|---|
| Programless type (With stroke study) | LECP2 | Step motor (Servo / 24 VDC) |
24 VDC ±10% |
6 (Photo-coupler isolation) |
6 (Photo-coupler isolation) |
2 stroke end points / 12 intermediate points |
6. Step Motor Driver (Pulse Input Type) LECPA
SMC – Step Motor Driver (Pulse Input Type) LECPA
Features | Step Motor Driver (Pulse Input Type) LECPA
- A driver that uses pulse signals to allow positioning at any position The actuator can be controlled from the customers’ positioning unit.
- Return-to-origin command signal
- With force limit function (Pushing force/Gripping force operations are available.)
Specifications | Step Motor Driver (Pulse Input Type) LECPA
| Type | Series | Compatible motor | Power supply voltage | Parallel I/O Input | Parallel I/O Output | Number of step data |
|---|---|---|---|---|---|---|
| Pulse input type | LECPA | Step motor (Servo / 24 VDC) |
24 VDC ±10% |
5 (Photo-coupler isolation) |
9 (Photo-coupler isolation) |
– |
7. AC Servo Motor Driver (Pulse Input Type) LECS
SMC – AC Servo Motor Driver (Pulse Input Type) LECS
Features | AC Servo Motor Driver (Pulse Input Type) LECS
- Pulse input type motor driver
- Compatible motor capacity: 100 W, 200 W, 400 W
- Compatible encoders: Incremental type Absolute type
- Servo adjustment using auto gain tuning
- With display setting function
- Positioning by up to 255 point tables
Specifications | AC Servo Motor Driver (Pulse Input Type) LECS
| Type | Model | Compatible motor | Power supply voltage | Parallel input/output Input |
Parallel input/output Output |
|---|---|---|---|---|---|
| Pulse input type (For incremental encoder) |
LECSA | AC servo motor (100 / 200 / 400 W) |
100 to 120 VAC (50 / 60 Hz) 200 to 230 VAC (50 / 60 Hz) |
6 | 4 |
| Pulse input type (For absolute encoder) |
LECSB | AC servo motor (100 / 200 / 400 W) |
100 to 120 VAC (50 / 60 Hz) 200 to 230 VAC (50 / 60 Hz) |
10 | 6 |
| CC-Link direct input type (For absolute encoder) |
LECSC | AC servo motor (100 / 200 / 400 W) |
100 to 120 VAC (50 /60 Hz) 200 to 230 VAC (50 / 60 Hz) |
– | – |
| SSCNETⅢ type (For absolute encoder) |
LECSS | AC servo motor (100 / 200 / 400 W) |
100 to 120 VAC (50 / 60 Hz) 200 to 230 VAC (50 / 60 Hz) |
– | – |
| Pulse input type / Positioning type (For absolute encoder) |
LECSB-T | AC servo motor (100 / 200 / 400 W) |
200 to 240 VAC (50 / 60 Hz) |
10 | 6 |
| CC-Link direct input type (For absolute encoder) |
LECSC-T | AC servo motor (100 / 200 / 400 W) |
200 to 230 VAC (50 / 60 Hz) |
– | – |
| Network card type / H type (For absolute encoder) |
LECSN-T | AC servo motor (100 / 200 / 400 W) |
200 to 240 VAC (50 / 60 Hz) |
– | – |
| SSCNETⅢ type / H type (For absolute encoder) |
LECSS-T | AC servo motor (100 / 200 / 400 W) |
200 to 240 VAC (50 / 60 Hz) |
– | – |
8. AC Servo Motor Driver (MECHATROLINK Compatible) LECYM / LECYU
SMC – AC Servo Motor Driver (MECHATROLINK Compatible) LECYM / LECYU
Features | AC Servo Motor Driver (MECHATROLINK Compatible) LECYM / LECYU
- Position control, speed control, and torque control can be used.
- Control encoder: Absolute 20-bit encoder (Resolution: 1048576 p/rev)
- Applicable Fieldbus protocol: MECHATROLINK-2, MECHATROLINK-3
Specifications | AC Servo Motor Driver (MECHATROLINK Compatible) LECYM / LECYU
| Type | Series | Compatible motor | Power supply voltage | Parallel I/O Input | Parallel I/O Output |
|---|---|---|---|---|---|
| MECHATROLINK-II type (For absolute encoder) |
LECYM | AC servo motor (100 / 200 / 400 W) |
200 to 230 VAC (50 / 60 Hz) |
7 (Number of optional allocations) |
1 (Number of fixed allocations) 3 (Number of optional allocations) |
| MECHATROLINK-III type (For absolute encoder) |
LECYU | AC servo motor (100 / 200 / 400 W) |
200 to 230 VAC (50 / 60 Hz) |
7 (Number of optional allocations) |
1 (Number of fixed allocations) 3 (Number of optional allocations) |
9. Multi-Axis Step Motor Controller JXC 73 / 83 / 92 / 93
SMC – Multi-Axis Step Motor Controller JXC 73 / 83 / 92 / 93
Features | Multi-Axis Step Motor Controller JXC 73 / 83 / 92 / 93
- Speed tuning control
- Linear/circular interpolation
- Positioning/pushing operation
- Absolute/relative position coordinate instructions
- Step data input (Max. 2048 points)
- Space saving, reduced wiring
Specifications | Multi-Axis Step Motor Controller JXC 73 / 83 / 92 / 93
| Type | Series | I/O type | Compatible motor | Power supply voltage | Number of axes |
|---|---|---|---|---|---|
| Step data input type |
JXC73 | NPN | Step motor (Servo/24 VDC) |
24 VDC ±10% |
Max. 4 axes |
| Step data input type |
JXC83 | PNP | Step motor (Servo / 24 VDC) |
24 VDC ±10% |
Max. 4 axes |
| Step data input type |
JXC92 | EtherNet/IPTM | Step motor (Servo / 24 VDC) |
24 VDC ±10% |
Max. 3 axes |
| Step data input type |
JXC93 | EtherNet/IPTM | Step motor (Servo/24 VDC) |
24 VDC ±10% |
Max. 4 axes |
10. For 4 Axes Simple Controller JXC□4-X1
SMC – For 4 Axes Simple Controller JXC□4-X1
Features | For 4 Axes Simple Controller JXC□4-X1
- 2-point operation is possible without programming! (End to end)
- Reduced setting labor (Only the speed and force need to be set)
- Reduced wiring labor (Only 2 inputs/outputs*)
- *Per axis
- Space saving Footprint: Reduced by up to approx.79%
Specifications | For 4 Axes Simple Controller JXC□4-X1
| Series | Compatible motor | Power supply voltage | Number of axes |
|---|---|---|---|
| JXC□4-X1 | Step motor (Servo / 24 VDC) |
24 VDC ±10% |
Max. 4 axes |
11. Fieldbus-compatible Gateway (GW) Unit LEC-G
SMC – Fieldbus-compatible Gateway (GW) Unit LEC-G
Features | Fieldbus-compatible Gateway (GW) Unit LEC-G
- The LEm series electric actuators are applicable to Fieldbus protocols.
- Conversion unit for Fieldbus network and LEC serial communication
- 2 methods of operation: Step data input, numerical data input
- Position, speed, and other. values can be checked on the PLC.
Specifications | Fieldbus-compatible Gateway (GW) Unit LEC-G
| Series | Applicable Fieldbus | Power supply voltage | Applicable controllers |
|---|---|---|---|
| LEC-G | CC-Link DeviceNetTM PROFIBUS DP EtherNet/IPTM |
24 VDC ±10% |
Series LECA6 |
12. Controller / Step Data Input Type LECA6
SMC – Controller / Step Data Input Type LECA6
Features | Controller / Step Data Input Type LECA6
- The controller is already set with the data of the actuator. (The actuator and controller are provided as a set.)
- Easy operation and simple setting: Easy mode, Detail setting: Normal mode
- Teaching box, controller setting software
Specifications | Controller / Step Data Input Type LECA6
| Type | Series | Compatible motor | Power supply voltage | Parallel I/O Input | Parallel I/O Output | Number of step data |
|---|---|---|---|---|---|---|
| Step data input type | LECA6 | Servo motor (24 VDC) |
24 VDC ±10% |
11 (Photo-coupler isolation) |
13 (Photo-coupler isolation) |
64 points |
13. Step Motor Controller with Step Data Teaching Function LECP6-XB120
SMC – Step Motor Controller with Step Data Teaching Function LECP6-XB120
Features | Step Motor Controller with Step Data Teaching Function LECP6-XB120
- Neither a PC nor a teaching box is required for adjusting the position of step data.
- With a JOG function for parallel input signals
Specifications | Step Motor Controller with Step Data Teaching Function LECP6-XB120
| Type | Series | Compatible motor | Power supply voltage | Parallel I/O Input | Parallel I/O Output | Number of step data |
|---|---|---|---|---|---|---|
| Step data input type | LECA6 | Servo motor (24 VDC) |
24 VDC ±10% |
11 (Photo-coupler isolation) |
13 (Photo-coupler isolation) |
64 points |
