• Series H1
• Component series 3X
• Nominal pressure 250 bar
• Piston Ø 40 … 320 mm
• Piston rod Ø 22 … 220 mm
• Stroke length up to 6000 mm

• 3 types of mounting
• Self-adjusting and adjustable end position cushioning

01	02	03		04		05		06	07	08		09	10	11	12	13	14	15	16
CG	H1		/		/		/		A	3X	/

01	Double rod cylinder		CG 18)
02	Series		H1
Types of mounting
03	Round flange at the cylinder head		MF3
	Trunnion		MT4 2)
	Foot mounting		MS2
04	Piston Ø (ØAL) 40 … 320 mm		…
05	Piston rod Ø (ØMM) 22 … 220 mm		…
06	Stroke length in mm3)		…
Design principle
07	Head and base flanged		A
08	Component series 30 … 39 (30 … 39: unchanged installation and connection dimensions)		3X
Line connection / version
09	According to ISO 1179-1 (pipe thread ISO 228-1)		B
	According to ISO 9974-1 (metric thread ISO 261)		M
	Flange connection according to ISO 6162-2 tab. 2 type 1 (≙ SAE 6000 PSI)		D 9)
	Flange connection according to ISO 6164 tab. 2		H
	according to ISO 1179-1 (pipe thread ISO 228-1) with flat pipe flange		C 31)
Line connection/position at cylinder head
10	View to piston rod30)		1
			2
			3
			4
Line connection/position at cylinder base
11	View to piston rod30)		1
			2
			3
			4
Piston rod design
12	Hard chromium-plated		C
	Hardened and hard chromium-plated		H 12)
Piston rod end
13	Thread for swivel head CGAS		A
	Thread for swivel head CGA, CGAK, plain clevis CSA		G 13)
	With mounted swivel head CGAS		S 17)
	With mounted swivel head CGA		L13; 17)
	With mounted swivel head CGAK		M13; 17)
	With mounted swivel head CSA		N1; 17)
End position cushioning
14	Without end position cushioning		U
	Both sides, self-adjusting		D 1)
	Both sides, adjustable		E
Seal design
15	For mineral oil HL, HLP and oil-in-water emulsion HFA	Standard seal system	M
		Standard seal system with guide rings	L
		Reduced friction heavy industry	R
	For mineral oil HL, HLP, oil-in-water emulsion HFA and water glycol HFC	Standard seal system HFC	G
		Servo quality/reduced friction	T
		Chevron seal kits	A
	For HDFR phosphate ester and HFDU polyol ester	Servo quality/reduced friction	S
		Standard seal system FKM	V
		Chevron seal kits	B
Option
16	Additional options, fill fields for additional options		Z
	Without additional options, do not fill fields for additional options		W

Fields for additional options
			17	18	19	20	21
	Z							-P 38)
17	Inductive proximity switches without mating connector – separate order							E 37)
	Without inductive proximity switches							W
18	Additional guide rings							F10; 28)
	Without additional guide rings							W
19	Measuring coupling, on both sides							A
	Without measuring coupling							W
20	Spherical bearing, maintenance-free							A14; 35)
	Flanged grease nipple							B
	Standard conical grease nipple							W
21	Piston rod extension “LY”, specify in mmin plain text							Y 16)
	Without piston rod extension							W

• 1) Only piston Ø 40 … 200 mm
• 2) Trunnion position freely selectable. When ordering, always specify the “XV” dimensions in the plain text in mm
• 3) For max. available stroke length see Technical data and for admissible stroke length (according to the kinking calculation) see Project planning information.
• 9) Only piston Ø 80 … 320 mm
• 10) Seal designs A, B not possible; piston Ø 220 … 320 mm standard
• 12) Only piston rod Ø 22 … 140 mm
• 13) Not with piston Ø 320 mm
• 14) Not possible with piston rod end “N”
• 16) Only at left piston rod side (orientation: catalog figures)
• 17) Only one swivel head/plain clevis mounted, left piston rod side (orientation: catalog figures)
• 18) Not standardized
• 28) With seal design “L” standard
• 30) All graphical representations in the data sheet show position 1
• 35) Not possible with MP3
• 37) Min. stroke length = 20 mm
• 38) Marks order-relevant information which cannot be represented in the ordering code. These must be specified for each order.

Order example:
CGH1MF3/100/56/300A3X/B11CADMW
CGH1MF/100/56/300A3X/B11CADMZ EWABW
With order-relevant information:
CGH1MF3/100/56/300A3X/B11CADMW-P
CGH1MF3/100/56/300A3X/B11CADMZ EWABW-P

Download PDF