Hydraulic cylinder, mill type รุ่น CGH3
Hydraulic cylinder, Mill type cylinder
Hydraulic cylinder, mill type รุ่น CGH3
รายละเอียด Hydraulic cylinder, mill type รุ่น CGH3
- Series H3
- Component series 3X
- Nominal pressure 350 bar
- Piston Ø 40 … 320 mm
- Piston rod Ø 28 … 220 mm
- Stroke length up to 6000 mm
Features
- 3 types of mounting
- Self-adjusting and adjustable end position cushioning
Type code
| 01 | 02 | 03 | 04 | 05 | 06 | 07 | 08 | 09 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CG | H3 | / | / | / | A | 3X | / |
| 01 | Double-acting cylinder18) | CG | |
| 02 | Series | H3 | |
| Types of mounting | |||
|---|---|---|---|
| 03 | Round flange at the cylinder head | MF3 | |
| Trunnion | MT4 2) | ||
| Foot mounting | MS2 | ||
| 04 | Piston Ø (ØAL) 40 … 320 mm | … | |
| 05 | Piston rod Ø (ØMM) 28 … 220 mm | … | |
| 06 | Stroke length in mm3) | … | |
| Design principle | |||
| 07 | Head and base flanged | A | |
| 08 | Component series 30 … 39 (30 … 39: unchanged installation and connection dimensions) | 3X | |
| Line connection / version | |||
| 09 | According to ISO 1179-1 (pipe thread ISO 228-1) | B | |
| According to ISO 9974-1 (metric thread ISO 261) | M | ||
| Flange connection according to ISO 6162-2 tab. 2 type 1 (≙ SAE 6000 PSI) | D 25) | ||
| Flange connection according to ISO 6164 tab. 2 | H | ||
| according to ISO 1179-1 (pipe thread ISO 228-1) with flat pipe flange | C 31) | ||
| Line connection/position at cylinder head | |||
| 10 | View to piston rod30) |  |
1 |
| 2 | |||
| 3 | |||
| 4 | |||
| Line connection/position at cylinder base | |||
| 11 | View to piston rod30) |  |
1 |
| 2 | |||
| 3 | |||
| 4 | |||
| Piston rod design | |||
| 12 | Hard chromium-plated | C | |
| Hardened and hard chromium-plated | H 24) | ||
| Piston rod end | |||
| 13 | Thread for swivel head CGKD | H | |
| Thread for swivel head CGA, CGAK, plain clevis CSA | G 26) | ||
| With mounted swivel head CGAS | S 17; 26) | ||
| With mounted swivel head CGA | L 17; 26) | ||
| With mounted swivel head CGAK | M 17; 26) | ||
| With mounted plain clevis CSA | N 1; 17) | ||
| End position cushioning | |||
| 14 | Without end position cushioning | U | |
| Both sides, self-adjusting | D 1) | ||
| Both sides, adjustable | E | ||
| Seal design | |||
| 15 | For mineral oil HL, HLP and oil-in-water emulsion HFA | Standard seal system | M |
| Standard seal system with guide rings | L | ||
| Reduced friction heavy industry |
R | ||
| For mineral oil HL, HLP, oil-in-water emulsion HFA and water glycol HFC | Standard seal system HFC | G | |
| Servo quality/reduced friction | T | ||
| Chevron seal kits | A | ||
| For HDFR phosphate ester and HFDU polyol ester | Servo quality/reduced friction | S | |
| Standard seal system FKM | V | ||
| Chevron seal kits | B | ||
| Option | |||
| 16 | Additional options, fill fields for additional options | Z | |
| Without additional options, do not fill fields for additional options | W | ||
| Fields for additional options | ||||||||
|---|---|---|---|---|---|---|---|---|
| 17 | 18 | 19 | 20 | 21 | ||||
| Z | -P 38) | |||||||
| 17 | Inductive proximity switches without mating connector – separate order | E 37) | ||||||
| Without inductive proximity switches | W | |||||||
| 18 | Additional guide rings | F 10; 28) | ||||||
| Without additional guide rings | W | |||||||
| 19 | Measuring coupling, on both sides | A | ||||||
| Without measuring coupling | W | |||||||
| 20 | Spherical bearing, maintenance-free | A | ||||||
| Flanged grease nipple | B | |||||||
| Standard conical grease nipple | W | |||||||
| 21 | Piston rod extension “LY”, specify in mmin plain text | Y 16) | ||||||
| Without piston rod extension | W | |||||||
- 1) Only piston Ø 40 … 200 mm
- 2) Trunnion position freely selectable. When ordering, always specify the “XV” dimensions in the plain text in mm
- 3) For max. available stroke length see Technical data and for admissible stroke length (according to the kinking calculation) see Project planning information.
- 9) Only piston Ø 80 … 320 mm
- 10) Seal designs A, B not possible; piston Ø 220 … 320 mm standard
- 14) Not possible with piston rod end “N”
- 16) Only at left piston rod side (orientation: see figures Dimensions)
- 17) Only one swivel head/plain clevis mounted, left piston rod side (orientation: see figures Accessories)
- 18) Not standardized
- 24) Only piston rod Ø 28 … 140 mm
- 25) Only piston Ø 63 … 320 mm
- 26) Only piston Ø 40 … 250 mm
- 27) Maximum operatign pressure 315 bar
- 28) With seal design “L” standard
- 30) All graphical representations in the data sheet show position 1
- 31) With MS2, only position 11 is possible
- 33) Version does not comply with ISO 6022
- 37) Min. stroke length = 20 mm
- 38) Marks order-relevant information which cannot be represented in the ordering code. These must be specified for each order.
Order example:
Without additional options:
CGH3MF3/100/56/300A3X/B11CADMW
With additional options:
CGHMF3/100/56/300A3X/B11CADMZ EWABW
With order-relevant information: CGH3MF3/100/56/300A3X/B11CADMW-P
CGHMF3/100/56/300A3X/B11CADMZ EWABW-P
