• Series H2
• Component series 3X
• Nominal pressure 250 bar
• Piston Ø 40 … 320 mm
• Piston rod Ø 25 … 220 mm
• Stroke length up to 6000 mm

• Standards: DIN 24333, ISO 6022
• 6 types of mounting
• Self-adjusting and adjustable end position cushioning

01	02	03		04		05		06	07	08		09	10	11	12	13	14	15	16
CS	H2		/		/		/		A	3X	/								Z

01	Single rod cylinder with position measurement system		CS 17)
02	Series		H2
Types of mounting
03	Swivel eye at cylinder base		MP3
	Self-aligning clevis at cylinder base		MP5
	Round flange at the cylinder head		MF3
	Round flange at the cylinder base		MF4
	Trunnion		MT4 1)
	Foot mounting		MS2
04	Piston Ø (ØAL) 40 … 320 mm		…
05	Piston rod Ø (ØMM) 25 … 220 mm		…
06	Stroke length in mm2)		…
Design principle
07	Head and base flanged		A
08	Component series 30 … 39 (30 … 39: unchanged installation and connection dimensions)		3X
Line connection / version
09	According to ISO 1179-1 (pipe thread ISO 228-1)		B
	According to ISO 9974-1 (metric thread ISO 261)		M 32)
	Flange connection according to ISO 6162-1 tab. 2 type 1 (≙ SAE 3000 PSI)		F 3; 20)
	Flange connection according to ISO 6162-2 tab. 2 type 1 (≙ SAE 6000 PSI)		D 3; 8)
	Flange connection according to ISO 6164 tab. 1		K 3)
	Flange connection according to ISO 6164 tab. 2		H 3)
	according to ISO 1179-1 (pipe thread ISO 228-1) with flat pipe flange		C 30)
	For directional and high-response valves	Subplate NG6	P3; 4)
		Subplate NG10	T3; 5)
		Subplate NG16	U3; 6)
		Subplate NG25	V3; 31)
	For SL and SV valves	Subplate NG6	A3; 4; 14)
		Subplate NG10	E3; 5; 14)
		Subplate NG20	L3; 6; 14)
		Subplate NG30	N3; 14; 31)
Line connection/position at cylinder head
10	View to piston rod29)		1
			2
			3
			4
Line connection/position at cylinder base
11	View to piston rod29)		1
			2
			3
			4
Piston rod design
12	Hard chromium-plated		C
	Hardened and hard chromium-plated		H 38)
	Nickel-plated and hard chromium-plated		N 18)
Piston rod end
13	Thread for swivel head CGKD		H
	With mounted swivel head CGKD		F
End position cushioning
14	Without end position cushioning		U
	Both sides, adjustable		E 19)
Seal design
15	For mineral oil HL, HLP and oil-in-water emulsion HFA	Standard seal system	M 28)
		Standard seal system with guide rings	L
		Reduced friction heavy industry	R 28)
	For mineral oil HL, HLP, oil-in-water emulsion HFA and water glycol HFC	Standard seal system HFC	G 28)
		Servo quality/reduced friction	T 28)
	For HDFR phosphate ester and HFDU polyol ester	Servo quality/reduced friction	S 28)
		Standard seal system FKM	V 28)
Option
16	Additional options, fill fields for additional options		Z

Fields for additional options
			17	18	19	20	21
	Z							-P 37)
17	Position measurement system, magnetostrictive without mating connector, mating connector ‒ separate order, see Technical data							T
18	Analog output 4 … 20 mA							C
	Analog output 0 … 10 V							F
	Digital output SSI							D
	Profibus D63							N
	Profibus D53							P
19	Measuring coupling, on both sides							A
	Without measuring coupling							W
20	Spherical bearing, maintenance-free							A13; 34)
	Flanged grease nipple							B
	Standard conical grease nipple							W
21	Piston rod extension “LY”, specify in mmin plain text							Y
	Without piston rod extension							W

• • Trunnion position freely selectable. When ordering, always specify the “XV” dimensions in the plain text in mm
  • For max. available stroke length see Technical data and for admissible stroke length (according to the kinking calculation) see Project planning information.
  • Not possible with MF4
  • Piston Ø 40 … 80 mm, only position 11, subplates only possible in combination with line connection “B” at the head
  • Piston Ø 63 … 200 mm, only position 11, subplates only possible in combination with line connection “B” at the head
  • Piston Ø 125 … 200 mm, only position 11, subplates only possible in combination with line connection “B” at the head
  • Only piston Ø 80 … 320 mm
  • 14) Subplates for SL and SV valves (isolator valves)

Please note: Seal designs T, G, L, R, S and V are not designed for the static holding function!

• 17) Not standardized
• 18) Only piston rod Ø 28 … 160 mm
• 19) Possible from piston rod Ø 45 mm
• 20) Only piston Ø 63 … 200 mm
• 28) With CSH, by default with guide belts
• 29) All graphical representations in the data sheet show position 1
• 30) With MS2, only position 11 is possible
• 31) Piston Ø 180 … 200 mm, only position 11, subplates only possible in combination with line connection “B” at the head
• 32) Version does not comply with ISO 6022
• 37) Marks order-relevant information which cannot be represented in the ordering code. These must be specified for each order.
• 38) Only piston rod Ø 25 … 140 mm

Order examples:
CSH2MP5/100/70/500A3X/B11CHUTZ TFABW
With order-relevant information:
CSH2MP5/100/70/500A3X/B11CHUTZ TFABW-P

Download PDF