• Series M1
• Component series 2X
• Nominal pressure 160 bar
• Piston Ø 40 … 200 mm
• Piston rod Ø 28 … 140 mm
• Stroke length up to 3000 mm

• Installation dimensions according to ISO 6020/1 and VW 39 D 920
• 9 types of mounting
• Self-adjusting and adjustable end position cushioning

01	02	03		04		05		06	07	08		09	10	11	12	13	14	15	16	17
CS	M1		/		/		/		A	2X	/								T

01	Single rod cylinder		CS 1)
02	Series		M1
Types of mounting
03	Rectangular flange at cylinder head		MF1 2)
	Round flange at the cylinder head		MF3
	Swivel eye at cylinder base		MP3
	Self-aligning clevis at cylinder base		MP5
	Trunnion		MT4 3)
	Foot mounting		MS2
04	Piston Ø (ØAL) from 25 … 200 mm; see Technical data		…
05	Piston rod Ø (ØMM) 28 … 140 mm; see Technical data		…
06	Stroke length in mm		…
Design principle
07	Head and base flanged		A
08	Component series 20 … 29 (20 … 29: unchanged installation and connection dimensions)		2X
Line connection / version
09	Pipe thread according to ISO 1179-1		B
	Metric ISO thread (DIN/ISO 6149-1)		R
	Enlarged pipe thread according to ISO 1179-1; see Dimensions		S 4)
	Rectangular flange connection according to ISO 6162; see Dimensions		F 6)
	Square flange connection according to ISO 6164; see Dimensions		H
	For directional and high-response valves; see Dimensions	Subplate NG6	P5; 7; 10)
		Subplate NG10	T5; 8; 10)
		Subplate NG16	U5; 9; 10)
	For SL and SV valves12); see Dimensions	Subplate NG6	A5; 7; 10)
		Subplate NG10	E5; 8; 10)
		Subplate NG20	L5; 9; 10)
Line connection/position at cylinder head
10	View to piston rod14)		1
			2
			3
			4
Line connection/position at cylinder base
11	View to piston rod14)		1
			2
			3
			4
Piston rod design
12	Hard chromium-plated		C
	Stainless steel, hard chromium-plated		L
Piston rod end
13	Thread (ISO 6020-1) for swivel head CGKD		G
	Thread (VW standard) for swivel head CGKD		H 13)
	Internal thread; see dimensions		E
	Piston rod end “H” with mounted swivel head CGKD		F 13)
	Piston rod end “G” with mounted swivel head CGKD		K
End position cushioning
14	Without end position cushioning		U
	Both sides, adjustable		E 11)
Seal design
15	Suitable for mineral oil according to DIN 51524 HL, HLP	Standard seal system	M
		Servo quality/reduced friction	T
	Suitable for phosphoric acid esters HFR	Servo quality/reduced friction	S
Option 1
16	Position measurement system, magnetostrictive without mating connector, mating connector ‒ separate order, see Technical data		T
Option 2
17	Analog output 4 … 20 mA		C
	Analog output 0 … 10 V		F
	Digital output SSI		D

• • 1)Not standardized
  • 2) Piston Ø 40 … 125 mm
  • 3) When ordering, always specify the “XV” dimensions in the plain text in mm (see order example)
  • 4) Piston Ø 63 … 200 mm
  • 5) Not for MF2; MF4
  • 6) Piston Ø 50 … 200 mm
  • 7) Piston Ø 40 … 80 mm, only position 11
  • 8) Piston Ø 63 … 200 mm, only position 11
  • 9) Piston Ø 125 … 200 mm, only position 11
  • 10) Subplates only possible with pipe thread (ISO 1179-1)
  • 11) Piston Ø 80 … 200 mm
  • 12) Subplates for SL and SV valves (isolator valves)

Please note: 

Seal designs T and S are not designed for the static holding function!
• 13) Per piston Ø only possible with large piston rod Ø
• 14) All graphical representations in the data sheet show position 1

Order example:
CSM1MT4/50/36/300A2X/B11CHUMTC, XV = 175 mm

General notices
Series CSM1…2X is based on series CDM1…2X (according to ISO 6020/1).
To series CSM1…2X, the same general notices apply as to series CDM1…2X.
Dimensional and/or type code variations resulting due to the integrated position measurement system are specified on the pages for the dimensions.

Download PDF