MITSUBISHI Gear Motor - GM-SHY series
MITSUBISHI Gear Motor – GM-SHY series
Feature | Gear Motor -GM-SHY series
Achieves a wide constant torque range in standard models with the use Mitsubishi
- Excellent drive characteristics of the inverter
- Achieves a wide constant torque range in standard modle with the use of Mitsubishi
- Tough with a long pro douct lift
- A longer product lift has been achieved by the first Super Helicross gear design in the industry and use of original special grease.
- Low noise
- A noise level lower than conventional models has been achieved by the smooth power transnission made possible by the optimum suprt Helicross gear design (Lower by 3 to 4 dB(A) compared to conventional Mitsubishi models)
- An exteensive lineup of products
- A full series of face-mounting type motors have been introduced, exeanding the range of choices.
- A model of choic can be selected from the from the extensive lineup with gear ratios of 1/5 of 1/1440
Specifications | Gear Motor – GM-SHY series
| Gear Motor Model | GM-SHY series | ||
|---|---|---|---|
| Output | 0.1 to 0.4 kW | ||
| Number of poles | 4 P | ||
| Number of phases | 3-phase | ||
| Voltage | 200 / 200 / 220 V | ||
| Frequency | 50 / 60 /60 Hz | ||
| Gear ratio | 1/5 to 1/1440 (See the model configration list.) | ||
| Rating | Continuos | ||
| Heat resistance class | 120 (E) | ||
| Starting method | Dieect start | ||
| Casing construction | Totally-enclosed fan-cooled type (totally-enclosed type only for 0.1 kW models) | ||
| Protective construction | Indoor type (equivalent to IP44) | ||
| Output Shaft | solid shaft (wih shaft end tap) | ||
| Mounting method | Foot mounting | Face mounting | Flange |
| Mounting | Installation | ||
| Installation location | Indoors (without corrosive gas, oil mist,flammable gas and dust) | ||
| Ambient temperature | -15 to 40 ๐C (non condensing) | ||
| Ambient humidity | 90 % RH or less | ||
| Altitude | 1000 m or less above sea level | ||
| Vibration | Normally : 4.9 m/s2 or less Instantaneously 9.8 m/s 2 or less | ||
| Brake type | Dc spring brake | ||
| Applicable Standards | JEC, JEM | ||
| Lubrication method | Grease lubrication (filled with TOUGHLIX GREASE GM) | ||
| Paint color | silver (equivalent to Munsell N 6.0) | ||
| Accessories | Output shaft protective cover and special washers | ||
ติดต่อแผนก Automation & Robots
