Specifications | Photoelectric Sensor Built-in Amplifier – E3FC series

Sensing method: Through-beam and Retro-reflective with MSR function

Model Item	Sensing Method		Through-beam	Retro-Reflective with MSR function
	NPN output	Pre-wired	E3FC-TN11 2M	E3FC-RN11 2M
		M12 Connector	E3FC-TN21	E3FC-RN21
	PNP output	Pre-wired	E3FC-TP11 2M	E3FC-RP11 2M
		M12 Connector	E3FC-TP21	E3FC-RP21
Sensing distance			20m	0.1 to 4 m (with E39-R1S)
Spot diameter			–
Standard sensing object			Opaque: 7 mm dia.min.	Opaque: 75 mm dia.min.
Differential travel			–
Directional angle			2? min.
Light source (wavelength)			Red LED (624 nm)	Red LED (624 nm)
Power supply voltage			10 to 30 VDC (include voltage ripple of 10%(p-p) max.)
Current consumption			40 mA max. (Emitter 25 mA max. Receiver 15 mA max.)	25 mA max.
Control output</tdth			NPN/PNP (open collector) Load current: 100 mA max. (Residual voltage: 3 V max.), Load power supply voltage: 30 VDC max.
Operation mode			Light-ON/Dark-ON selectable by wiring *1.
Indicator			Operation indicator (orange) Stability indicator (green) Power indicator (green): only Emitter of Through-beam
Protection circuits			Power supply reverse polarity protection, Output short-circuit protection, and Output reverse polarity protection
Response time			0.5 ms
Sensitivity adjustment			Fixed
Ambient Illumination (Reciever side)			Incandescent lamp: 3,000 lx max./ Sunlight: 10,000 lx max.
Ambient temperature range			Operating: -25 to 55?C/ Storage: -30 to 70?C (with no icing or condensation)
Ambient humidity range			Operating: 35 to 85%/ Storage: 35 to 95% (with no condensation)
Insulation resistance			20 M? min. at 500 VDC
Dielectric strength			1,000 VAC at 50/60 Hz for 1 min. between current-carrying parts and case
Vibration resistance			Destruction: 10 to 55 Hz, 1.5 mm double amplitude for 2 hours each in X, Y and Z directions
Shock resistance			Destruction: 500 m/s2 3 times each in X, Y and Z directions
Degree of protection			IEC: IP67, IP68 *2., DIN 40050-9: IP69K *3.
Weight	Pre-wired cable (2M)		152 g	76 g
	Connector		44 g	22 g
Material	Case		SUS 316L (1.4404)
	Lens and Display		PMMA
	Adjuster		–
	Nut		SUS 316L (1.4404)
Accessories			Instruction sheet M18 nuts (4 pcs)	Instruction sheet M18 nuts (2 pcs)

Sensing method: Diffuse-reflective

Model Item	Sensing Method		Diffuse-reflective
	NPN output	Pre-wired	E3FC-DN12 2M	E3FC-DN13 2M	E3FC-DN15 2M	E3FC-DN16 2M
		M12 Connector	E3FC-DN22	E3FC-DN23	E3FC-DN25	E3FC-DN26
	PNP output	Pre-wired	E3FC-DP12 2M	E3FC-DP13 2M	E3FC-DP15 2M	E3FC-DP16 2M
		M12 Connector	E3FC-DP22	E3FC-DP23	E3FC-DP25	E3FC-DP26
Sensing distance			300 mm (white paper:300 x 300 mm)	1 m (white paper: 300 x 300 mm)	300 mm (white paper: 300 x 300 mm)	1 m (white paper: 300 x 300 mm)
Spot diameter (reference value)			40 x 50 mm Sensing distance of 300 mm	120 x 150 mm Sensing distance of 1 m	40 x 50 mm Sensing distance of 300 mm	120 x 150 mm Sensing distance of 1 m
Standard sensing object			–
Differential travel			20% max.
Directional angle			–
Light source (wavelength)			Red LED (624 nm)		Infrared LED (850 nm)
Power supply voltage			10 to 30 VDC (include voltage ripple of 10%(p-p) max.)
Current consumption			25 mA max.
Control output			NPN/PNP (open collector) Load current: 100 mA max. (Residual voltage: 3 V max.), Load power supply voltage: 30 VDC max.
Operation mode			Light-ON/Dark-ON selectable by wiring *3.
Indicator			Operation indicator (orange) Stability indicator (green)
Protection circuits			Power supply reverse polarity protection, Output short-circuit protection, and Output reverse polarity protection
Response time			0.5 ms
Sensitivity adjustment			One-turn adjuster
Ambient Illumination			Incandescent lamp: 3,000 lx max./ Sunlight: 10,000 lx max.
Ambient temperature range			Operating: -25 to 55?C/ Storage: -30 to 70?C (with no icing or condensation)
Ambient humidity range			Operating: 35 to 85%/ Storage: 35 to 95% (with no condensation)
Insulation resistance			20 M? min. at 500 VDC
Dielectric strength			1,000 VAC at 50/60 Hz for 1 min. between current-carrying parts and case
Vibration resistance			Destruction: 10 to 55 Hz, 1.5 mm double amplitude for 2 hours each in X, Y and Z directions
Shock resistance			Destruction: 500 m/s*2 3 times each in X, Y and Z directions
Degree of protection			IEC: IP67, IP68 *2., DIN 40050-9: IP69K *3.
Weight	Pre-wired cable (2M)		76 g
	Connector		22 g
Material	Case		SUS 316L (1.4404)
	Lens and Display		PMMA
	Adjuster		POM
	Nut		SUS 316L (1.4404)
Accessories			Instruction sheet M18 nuts (2 pcs)

Sensing method: BGS and Transparent detected with p-opaquing function

Model Item	Sensing Method		BGS (Background suppression )		Transparent detected with P-opaquing function
	NPN output	Pre-wired	E3FC-LN11 2M	E3FC-LN12 2M	E3FC-BN11 2M
		M12 Connector	E3FC-LN21	E3FC-LN22	E3FC-BN21
	PNP output	Pre-wired	E3FC-LP11 2M	E3FC-LP12 2M	E3FC-BP11 2M
		M12 Connector	E3FC-LP21	E3FC-LP22	E3FC-BP21
Sensing distance			100 mm (white paper: 300 x 300 mm)	200 mm (white paper: 300 x 300 mm)	100 to 500 mm (with E39-RP1)
Spot diameter (reference value)			10 x 10 mm Sensing distance of 100 mm	10 x 15 mm Sensing distance of 200 mm	–
Standard sensing object			–		glass (t = 1.0 mm): 150 ? 150 mm
Differential travel			20% max.		–
Directional angle			–
Light source (wavelength)			Red LED (624 nm)
Power supply voltage			10 to 30 VDC (include voltage ripple of 10%(p-p) max.)
Current consumption			25 mA max.
Control output			NPN/PNP (open collector) Load current: 100 mA max. (Residual voltage: 3 V max.), Load power supply voltage: 30 VDC max.
Operation mode			Light-ON/Dark-ON selectable by wiring *1.
Indicator			Operation indicator (orange) Stability indicator (green)
Protection circuits			Power supply reverse polarity protection, Output short-circuit protection, and Output reverse polarity protection
Response time			0.5 ms
Sensitivity adjustment			Fixed		One-turn adjuster
Ambient Illumination			Incandescent lamp: 3,000 lx max./ Sunlight: 10,000 lx max.
Ambient temperature range			Operating: -25 to 55?C/ Storage: -30 to 70?C(with no icing or condensation)
Ambient humidity range			Operating: 35 to 85%/ Storage: 35 to 95% (with no condensation)
Insulation resistance			20 M? min. at 500 VDC
Dielectric strength			1,000 VAC at 50/60 Hz for 1 min. between current-carrying parts and case
Vibration resistance			Destruction: 10 to 55 Hz, 1.5 mm double amplitude for 2 hours each in X, Y and Z directions
Shock resistance			Destruction: 500 m/s2 3 times each in X, Y and Z directions
Degree of protection			IEC: IP67, IP68 *2., DIN 40050-9: IP69K *3.		IEC: IP67, DIN 40050-9: IP69K *3
Weight	Pre-wired cable (2M)		76 g		Approx. 95 g/Approx. 65 g
	Connector		22 g		Approx. 50 g/Approx. 20 g
Material	Case		SUS 316L (1.4404)
	Lens and Display		PMMA
	Adjuster		–		POM
	Nut		SUS 316L (1.4404)
Accessories			Instruction sheet M18 nuts (2 pcs)

1. L-On fixed output available for Diffuse reflective and BGS models. Please add “A” in order code (e.g. E3FC-DP11A 2M)
2. IP68 Degree of Protection Specifications IP68 is defined by heat shock resistance with 20 test cycles of 30 min. changing between 3? and 60? surface tensioned water.
3. IP69K Degree of Protection Specifications IP69K is a protection specification stipulated by DIN 40050 Part 9 of the German standards. The test item is sprayed with 80?C water from a nozzle of a specified shape at a water pressure of 80 to 100 bar. The amount of water water is 14 to 16 liters per minute. The distance between the test item and the nozzle is 10 to 15 cm. The water is discharged at angles of 0?, 30?, 60?, and 90? from the horizontal plane for 30 seconds at each angle while the test item is rotated horizontally.

Engineering Data (Reference Value)

Parallel Operating Range

Through-beam Models

E3FC-T[]

Retro-reflective Models (with MSR function)

E3FC-R[]

Operating Range

Diffuse-reflective Models

E3FC-D[]2

E3FC-D[]3

E3FC-D[]5

E3FC-D[]6

BGS Models

E3FC-L[]1, E3FC-L[]2

Transparent object detection models

E3FC-B[]1

Excess Gain vs. Distance

Through-beam Models

E3FC-T[]

Retro-reflective Models (with MSR function)

E3FC-R[]

Diffuse-reflective Models

E3FC-D[]2

E3FC-D[]3

E3FC-D[]5

E3FC-D[]6

Transparent object detection models

E3FC-B[]1

Sensing Distance vs. Sensing Object Material

BGS Models

E3FC-L[]1

E3FC-L[]2

Output circuit diagram

PNP Output

MODEL: E3FC-TP[], E3FC-RP[], E3FC-DP[], E3FC-BP[]

Operation mode	Timing charts	Operation selector	Output circuit
Light-ON		Connect the pink wire Pin(2)) to the brown (Pin(1))	Through-beam Receivers, Retro-reflective Models, Diffuse-reflective Models
Dark-ON		Connect the pink wire (Pin(2)) to the blue (Pin(3)) or open the pink wire (Pin(2))

MODEL: E3FC-LP[]

Operation mode	Timing charts	Operation selector	Output circuit
Light-ON		Connect the pink wire (Pin(2)) to the brown (Pin(1))	Background suppression
Dark-ON		Connect the pink wire (Pin(2)) to the blue (Pin(3)) or open the pink wire (Pin(2))

NPN Output

MODEL: E3FC-TN[], E3FC-RN[], E3FC-DN[], E3FC-BN[]

Operation mode	Timing charts	Operation selector	Output circuit
Light-ON		Connect the pink wire (Pin(2)) to the brown (Pin(1)) or open the pink wire (Pin(2))	Through-beam Receivers, Retro-reflective Models, Diffuse-reflective Models
Dark-ON		Connect the pink wire (Pin(2)) to the blue (Pin(3))

MODEL: E3FC-LN[]

Operation mode	Timing charts	Operation selector	Output circuit
Light-ON		Connect the pink wire (Pin(2)) to the brown (Pin(1)) or open the pink wire (Pin(2))	Background suppression
Dark-ON		Connect the pink wire (Pin(2)) to the blue (Pin(3))

Connector Pin Arrangement

M12 Connector Pin Arrangement

Connectors (Sensor I/O connectors)

M12 4-wire Connectors

Classification	Wire color	Connector pin No.	Application
DC	Brown	1	Power supply (+V)
	White	2	L/on • D/on selectable
	Blue	3	Power supply (0 V)
	Black	4	Output

Precautions for Safe Use

Be sure to follow the safety precautions below for added safety.

1. Do not use the sensor under the environment with explosive, flammable or corrosive gas.
2. Do not use the sensor under the oil or chemical environment exceeding specifications. Performance is assured for typical detergents and disinfectants used in Food & Beverage industry.

Refer to the following table when using these agents:

Manufacturer	Product name	Concen- tration	Testtime
Diversey	Diverfoam SMS HD	5%	720 h
	Oxofoam	5%	720 h
	Acifoam	5%	720 h
	Divosan Hypochlorit	1%	720 h
	Divosan Forte	1%	720 h
Ecolab	P3-topactive? 200	5%	720 h
	P3-topax? 56	5%	720 h
	P3-topactive? OKTO	3%	720 h
	P3-topax? 990	3%	720 h
	P3-topax? 66	3%	720 h
General	H2O2	6,5%	240 h

1. Do not use the sensor under the environment under the other conditions in excess of rated.
2. Do not use the sensor in place that is exposed by direct sunlight.
3. Do not use the sensor in place where the sensor may receive direct vibration or shock.
4. Do not use the thinner, alcohol, or other organic solvents.
5. Never disassemble, repair nor tamper with the sensor.
6. Please process it as industrial waste.

Dimensions | Photoelectric Sensor Built-in Amplifier – E3FC series

Sensors

(Unit: mm)
Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified.

Pre-wired Models

E3FC-T[]1[] E3FC-R[]1[] E3FC-D[]1[] E3FC-L[]1[] E3FC-B[]1[]

M12 Connector Models

E3FC-T[]2[] E3FC-R[]2[] E3FC-D[]2[] E3FC-L[]2[] E3FC-B[]2[]

Attached nut

Accessories (Order Separately)

Reflectors

E39-R1S

E39-R50

E39-RP1

E39-R16

Mounting brackets

E39-L183

Flush mounting nut

E39-EL16

คุณสมบัติ | Photoelectric Sensor Built-in Amplifier – E3FC series

• ตัวเรือนเหล็กคุณภาพสูง (SUS316L)
• ทนต่อสภาวะช็อกจากความร้อน
• อีพอกซีเรซินป้องกันน้ำเข้าหากขั้วต่อไม่ได้รับการแก้ไขอย่างเหมาะสม
• พิสูจน์ด้วยผงซักฟอกอุตสาหกรรมต่างๆ ของ Ecolab และ Diversey (รายละเอียดใน PDF [P.10])
• ไฟ LED สีแดงที่มองเห็นได้เจนช่วยให้จัดตำแหน่งได้ง่าย

คุณสมบัติ | Photoelectric Sensor Built-in Amplifier – E3FC series

Photoelectric Sensor Built-in Amplifier	E3FC
วิธีการตรวจจับ	Throuh-beam, Retro-Reflective, Diffuse-reflective, BGS, Transparent detected
ระยะตรวจจับ	100 mm
	200 mm
	300 mm
	100 – 500 mm
	1 m
	0.1 – 4 m
	20 m
แรงดันไฟฟ้า	10 – 30 VDC
กระแสใช้ไฟฟ้า	สูงสุด 25 มิลลิแอมป์, สูงสุด 40 มิลลิแอมป์
เวลาตอบสนอง	0.5 มิลลิวินาที
ระดับการป้องกัน	IP67, IP68, IP69K
วัสดุภายนอก	SUS 316L