OMRON Photo micro Sensor - EE-SX95
OMRON Photomicro Sensor – EE-SX95
Model Numbers | Photomicro Sensor – EE-SX95
Sensors
Appearance | Sensing method |
Sensing distance |
Output configuration |
Connection method (Cable length) |
Output type |
Model |
---|---|---|---|---|---|---|
Standard |
Throughbeam (with slot) |
5 mm (slot width) (Infrared light) |
Light-ON Dark-ON (2 outputs) |
Pre-wired model with standard cable (1 m) |
NPN | EE-SX950-W 1M *1 |
PNP | EE-SX950P-W 1M *2 | |||||
Pre-wired model with robot cable (1 m) |
NPN | EE-SX950-R 1M *1 | ||||
Pre-wired connector model with robot cable (0.3 m) |
NPN | EE-SX950-C1J-R 0.3M | ||||
L-shaped |
Pre-wired model with standard cable (1 m) |
NPN | EE-SX951-W 1M *1 | |||
PNP | EE-SX951P-W 1M *2 | |||||
Pre-wired model with robot cable (1 m) |
NPN | EE-SX951-R 1M *1 | ||||
Pre-wired connector model with robot cable (0.3 m) |
NPN | EE-SX951-C1J-R 0.3M | ||||
F-shaped |
Pre-wired model with standard cable (1 m) |
NPN | EE-SX952-W 1M *1 | |||
PNP | EE-SX952P-W 1M *2 | |||||
Pre-wired model with robot cable (1 m) |
NPN | EE-SX952-R 1M *1 | ||||
Pre-wired connector model with robot cable (0.3 m) |
NPN | EE-SX952-C1J-R 0.3M | ||||
R-shaped |
Pre-wired model with standard cable (1 m) |
NPN | EE-SX953-W 1M *1 | |||
PNP | EE-SX953P-W 1M *2 | |||||
Pre-wired model with robot cable (1 m) |
NPN | EE-SX953-R 1M *1 | ||||
Pre-wired connector model with robot cable (0.3 m) |
NPN | EE-SX953-C1J-R 0.3M | ||||
U-shaped |
Pre-wired model with standard cable (1 m) |
NPN | EE-SX954-W 1M *1 | |||
PNP | EE-SX954P-W 1M *2 | |||||
Pre-wired model with robot cable (1 m) |
NPN | EE-SX954-R 1M *1 | ||||
Pre-wired connector model with robot cable (0.3 m) |
NPN | EE-SX954-C1J-R 0.3M |
*1. A model is available with a 3-m cable. The model number is EE-SX95[]-[]3M. (Example: EE-SX950-W 3M)
*2. A pre-wired model with a PNP output and 1-m robot cable is available. The model number is EE-SX95[]P-R 1M.
(Example: EE-SX950P-R 1M)
Accessories (Order Separately)
Connector with Robot Cable
Type | Cable length | Model | Remarks |
---|---|---|---|
Connector with Cable | 2 m | EE-1016-R 2M | Connector with lock, AWG26, 4-core Robot Cable |
Specifications | Photomicro Sensor – EE-SX95
Type | Standard | L-shaped | F-shaped | R-shaped | U-shaped | |
---|---|---|---|---|---|---|
NPN output | Pre-wired models |
EE-SX950-[] | EE-SX951-[] | EE-SX952-[] | EE-SX953-[] | EE-SX954-[] |
Pre-wired connector models |
EE-SX950-C1J-R | EE-SX951-C1J-R | EE-SX952-C1J-R | EE-SX953-C1J-R | EE-SX954-C1J-R | |
PNP output | Pre-wired models |
EE-SX950P-[] | EE-SX951P-[] | EE-SX952P-[] | EE-SX953P-[] | EE-SX954P-[] |
Sensing distance | 5 mm (slot width) | |||||
Standard sensing object |
Opaque: 1.8 × 0.8 mm min. | |||||
Differential travel | 0.025 mm max. *1 | |||||
Light source (wave length) |
Infrared LED (940 nm) | |||||
Indicator | Light indicator (red LED) | |||||
Power supply voltage | 5 to 24 VDC ±10%, ripple (p-p): 10% max. | |||||
Current consumption | 15 mA max. | |||||
Control output | Load power supply voltage: 5 to 24 VDC Load current: 50 mA max. OFF current: 0.5 mA max. 50 mA load current with a residual voltage of 0.7 V max. 5 mA load current with a residual voltage of 0.4 V max. |
|||||
Protection circuit | Load short-circuit protection | |||||
Response frequency | 1 kHz min. (3 kHz average) *2 | |||||
Ambient illumination | 1,000 lx max. with fluorescent light on the surface of the receiver | |||||
Ambient temperature range |
Operating: -25 to 55°C Storage: -30 to 80°C (with no icing or condensation) |
|||||
Ambient humidity range | Operating: 5% to 85% Storage: 5% to 95% (with no icing or condensation) |
|||||
Vibration resistance (destruction) |
10 to 2,000 Hz (peak acceleration: 150m/s2) with a 0.75-mm single amplitude for 2.5 h (15-min periods, 10 cycles) each in X, Y, and Z directions |
|||||
Shock resistance (destruction) |
500 m/s2 for 3 times each in X, Y, and Z directions | |||||
Degree of protection | IEC60529 IP50 | |||||
Connection method | Pre-wired models (standard length: 1 m), Pre-wired connector models (standard length: 0.3 m) |
|||||
Weight (packed state) |
Pre-wired models |
Approx. 15 g | ||||
Pre-wired connector models |
Approx. 7 g | |||||
Materials | Case/cover | Polybutylene terephthalate (PBT) | ||||
Emitter/ receiver |
Polycarbonate (PC) |
*1. The differential travel is the value when a sensing object is moved in a lateral direction to the slot.
*2. The response frequency was measured by detecting the following rotating disk.
Product | Connector with Robot Cable | |
---|---|---|
Model | EE-1016-R | |
Appearance | ||
Contact resistance | 25 mΩ max. (at 10 mA DC and 20 mV max.) | |
Insertion strength | 20 N max. | |
Surplus strength (housing holding strength) |
15 N min. | |
Cable length | 2 m | |
Ambient temperature range | -25 to 85°C | |
Materials | Housing | Nylon |
Contact | Phosphor bronze |
Dimensions | Photomicro Sensor – EE-SX95
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
Sensors
EE-SX950-[] EE-SX950P-[] EE-SX950-C1J-R
EE-SX951-[] EE-SX951P-[] EE-SX951-C1J-R
EE-SX952-[] EE-SX952P-[] EE-SX952-C1J-R
EE-SX953-[] EE-SX953P-[] EE-SX953-C1J-R
EE-SX954-[] EE-SX954P-[] EE-SX954-C1J-R
Accessories (Order Separately)
Connector with Robot Cable
EE-1016-R
คุณสมบัติ | Photomicro Sensor – EE-SX95
- ยึกโดยใช้สกรู M3 หรือ M2
- ความลึกของช่องตรวจจับที่เชื่อถือได้คือ 6.5 mm
- การแสดงค่าของหน้าต่างการตรวจจับเพื่อรับรองการเพิ่มของความลึกได้ง่าย
- ไฟแสดงสถานะสว่างรับรองได้จากหลายทิศทาง
- มีทั้งเอาต์พุต light-on และ dark-ON
- ทุกรุ่นมีให้เลือกสายมาตรฐานหรือสายหุ่นยนต์แบบยืดหยุ่น
- การลัดวงจรของโหลดมีวงจรป้องกันให้
คุณสมบัติ | Photomicro Sensor – EE-SX95
Photomicro Sensor | EE-SX95 |
---|---|
ประเภท | มาตรฐาน, รูปตัว L, F, R, U |
ระยะตรวจจับ | 5 mm |
แรงดันไฟฟ้า | 5 – 24 VDC |
การใช้กระแสไฟฟ้า | สูงสุด 15 มิลลิแอมป์ |
ความถี่ตอบสนอง | 1 kHz min (Avg. 3 kHz) |
ระดับการป้องกัน | IP50 |
วัสดุครอบคลุม | โพลีบิวเทเรฟทาเลต (PBT) |