Standard Proximity Sensors

Size		M8	M12	M18	M30
Shielded		Shielded
Model		E2ER-X2D[]	E2ER-X3D[]	E2ER-X7D[]	E2ER-X10D[]
Sensing distance		2 mm ±10%	3 mm ±10%	7 mm ±10%	10 mm ±10%
Set distance *1		0 to 1.6 mm	0 to 2.4 mm	0 to 5.6 mm	0 to 8 mm
Differential travel		15% max. of sensing distance	10% max. of sensing distance
Detectable object		Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on Catalog.)
Standard sensing object		Iron, 8 × 8 × 1 mm	Iron, 12 × 12 × 1 mm	Iron, 18 × 18 × 1 mm	Iron, 30 × 30 × 1 mm
Response frequency *2		1.5 kHz	1 kHz	0.5 kHz	0.4 kHz
Power supply voltage		10 to 30 VDC, (including 10% ripple (p-p))
Leakage current		0.8 mA max.
Control output	Load current	3 to 100 mA
	Residual voltage	3 V max. (Load current: 100 mA, Cable length: 2 m)
Indicators		D1 Models: Operation indicator (red), Setting indicator (green) D2 Models: Operation indicator (red)
Operation mode (with sensing object approaching)		D1 Models: NO D2 Models: NC Refer to the timing charts under I/O Circuit Diagrams on Catalog for details.
Protection circuits		Surge suppressor, Load short-circuit protection
Ambient temperature range		Operating: -25 to 70°C, Storage: -40 to 85°C (with no icing or condensation)
Ambient humidity range		Operating and Storage: 35% to 95% (with no condensation)
Temperature influence		±15% max. of sensing distance at 23°C in the temperature range of -25 to 70°C	±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
Voltage influence		±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
Insulation resistance		50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength		1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
Vibration resistance (destruction)		10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance (destruction)		500 m/s2 10 times each in X, Y, and Z directions	1,000 m/s2 10 times each in X, Y, and Z directions
Degree of protection		IP67 (IEC 60529) and IP67G *3 (JIS C 0920 Annex 1) Passed OMRON’s Oil-resistant Component Evaluation Standards *4 (Cutting oil type: specified in JIS K 2241:2000, Temperature: 35 °C max.)
Connection method		Pre-wired Models (Standard cable length: 2 m) and Pre-wired Connector Models (Standard cable length: 300 mm)
Weight (packed state)	Pre-wired Models	Approx. 65 g	Approx. 75 g	Approx. 145 g	Approx. 215 g
	Pre-wired Connector Models	Approx. 30 g	Approx. 40 g	Approx. 90 g	Approx. 155 g
Materials	Case	Stainless steel (SUS303)	Nickel-plated brass
	Sensing surface	Polybutylene terephthalate (PBT)
	Clamping nuts	Nickel-plated brass
	Toothed washer	Zinc-plated iron
Accessories		Instruction manual

*1. Use the Sensor within the range in which the setting indicator (green LED) is ON (except D2 Models).
*2. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.
*3. The IP67G is the degree of protection which is defined according to the JIS (Japanese Industrial Standards).
The IP67 indicates the same level of protection as defined by the IEC, and the G indicates that a device has resistance to oil.
*4. The Oil-resistant Component Evaluation Standards are OMRON’s own durability evaluation standards.
The Pre-wired Connector Model meets the degree of protection when it is correctly connected with an XS5[]R Oil-resistant Connector.
The degree of protection is not satisfied with the part where there is no XS5FR Oil-resistant Connector connected and cable wires are uncovered. And as for the Pre-wired Models, the degree of protection is not satisfied with the part where cable wires are uncovered.

Chip-immune Proximity Sensors

Size		M12	M18	M30
Shielded		Shielded
Model		E2ERZ-X2D[]	E2ERZ-X4D[]	E2ERZ-X8D[]
Sensing distance		2 mm ±10%	4 mm ±10%	8 mm ±10%
Set distance *1		0 to 1.6 mm	0 to 3.2 mm	0 to 6.4 mm
Differential travel		20% max. of sensing distance
Detectable object		Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on Catalog.)
Standard sensing object		Iron, 12 × 12 × 1 mm	Iron, 30 × 30 × 1 mm	Iron, 54 × 54 × 1 mm
Response frequency *2		200 Hz	100 Hz	30 Hz
Power supply voltage		10 to 30 VDC, (including 10% ripple (p-p))
Leakage current		0.8 mA max.
Control output	Load current	3 to 100 mA
	Residual voltage	3 V max. (Load current: 100 mA, Cable length: 2 m)
Indicators		D1 Models: Operation indicator (red), Setting indicator (green) D2 Models: Operation indicator (red)
Operation mode (with sensing object approaching)		D1 Models: NO D2 Models: NC Refer to the timing charts under I/O Circuit Diagrams on Catalog for details.
Protection circuits		Surge suppressor, Load short-circuit protection
Ambient temperature range		Operating and Storage: 0 to 50°C (with no icing or condensation)
Ambient humidity range		Operating and Storage: 35% to 95% (with no condensation)
Temperature influence		±20% max. of sensing distance at 23°C in the temperature range of 0 to 50°C
Voltage influence		±2.5% max. of sensing distance at rated voltage in the rated voltage ±10% range
Insulation resistance		50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength		1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
Vibration resistance (destruction)		10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance (destruction)		1,000 m/s2 10 times each in X, Y, and Z directions
Degree of protection		IP67 (IEC 60529) and IP67G *3 (JIS C 0920 Annex 1) Passed OMRON’s Oil-resistant Component Evaluation Standards *4 (Cutting oil type: specified in JIS K 2241:2000, Temperature: 35 ｰC max.)
Connection method		Pre-wired Models (Standard cable length: 2 m) and Pre-wired Connector Models (Standard cable length: 300 mm)
Weight (packed state)	Pre-wired Models	Approx. 75 g	Approx. 145 g	Approx. 215 g
	Pre-wired Connector Models	Approx. 40 g	Approx. 90 g	Approx. 155 g
Materials	Case	Nickel-plated brass
	Sensing surface	Polybutylene terephthalate (PBT)
	Clamping nuts	Zinc-plated iron
	Toothed washer	Zinc-plated iron
Accessories		Instruction manual

*1. Use the Sensor within the range in which the setting indicator (green LED) is ON (except D2 Models).
*2. The response frequency is an average value.
Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.
*3. The IP67G is the degree of protection which is defined according to the JIS (Japanese Industrial Standards).
The IP67 indicates the same level of protection as defined by the IEC, and the G indicates that a device has resistance to oil.
*4. The Oil-resistant Component Evaluation Standards are OMRON’s own durability evaluation standards.
The Pre-wired Connector Model meets the degree of protection when it is correctly connected with an XS5[]R Oil-resistant Connector.
The degree of protection is not satisfied with the part where there is no XS5FR Oil-resistant Connector connected and cable wires are uncovered.
And as for the Pre-wired Models, the degree of protection is not satisfied with the part where cable wires are uncovered.

Pre-wired Models

E2ER-X2D[]

* D1 Models: Operation indicator (red), Setting indicator (green),
D2 Models: Operation indicator (red)

E2ER-X3D[]
E2ERZ-X2D[]

* D1 Models: Operation indicator (red), Setting indicator (green),
D2 Models: Operation indicator (red)

E2ER-X7D[]
E2ERZ-X4D[]

* D1 Models: Operation indicator (red), Setting indicator (green),
D2 Models: Operation indicator (red)

E2ER-X10D[]
E2ERZ-X8D[]

* D1 Models: Operation indicator (red), Setting indicator (green),
D2 Models: Operation indicator (red)

Mounting Hole Dimensions</h4

Angle R of the Bending Wire

Pre-wired Connector Models

E2ER-X2D[]-M1TGJ

* D1 Models: Operation indicator (red), Setting indicator (green),
D2 Models: Operation indicator (red)

E2ER-X3D[]-M1TGJ
E2ERZ-X2D[]-M1TGJ

* D1 Models: Operation indicator (red), Setting indicator (green),
D2 Models: Operation indicator (red)

E2ER-X7D[]-M1TGJ
E2ERZ-X4D[]-M1TGJ

* D1 Models: Operation indicator (red), Setting indicator (green),
D2 Models: Operation indicator (red)

E2ER-X10D[]-M1TGJ
E2ERZ-X8D[]-M1TGJ

* D1 Models: Operation indicator (red), Setting indicator (green),
D2 Models: Operation indicator (red)

Mounting Hole Dimensions

Angle R of the Bending Wire

คุณสมบัติ | Proximity Sensor Cylindrical – E2ER / E2ERZ

Proximity Sensor Cylindrical	E2ER / E2ERZ
ประเภทรุ่น	DC 2-สาย
ระยะการตรวจจับ (มม.)	2, 3, 4, 5, 7, 8, 10
ขนาดตัวเรือน	M8, M12, M18, M30
วัสดุตัวเรือน	โลหะ
แหล่งจ่ายไฟ	10 – 30 VDC
ระดับการป้องกัน	IP67