Add to wishlist
E2EY
E2EY
E2EY
E2EY

OMRON Proximity Sensor – E2EY

    A Proximity Sensor for Aluminum, Brass and Other Non-ferrous Metals. Iron Is Not Detected.

    button

    Category:

      OMRON Proximity Sensor - E2EY

      E2EY (1)

      OMRON Proximity Sensor Cylindrical – E2EY

      Model Numbers | Proximity Sensor Cylindrical – E2EY

      Sensors

      Appearance Sensing distance Output configuration/
      Operation mode      		 Model
      M18 4 mm DC 3-wire, NPN
      NO      		 E2EY-X4C1 2M
      M30 8 mm E2EY-X8C1 2M

      Specifications | Proximity Sensor Cylindrical – E2EY

      Ratings and Specifications

      Model E2EY-X4C1 E2EY-X8C1
      Sensing distance 4 mm ±10% 8 mm ±10%
      Set distance 0 to 2.8 mm 0 to 5.6 mm
      Differential travel 20% max. of sensing distance
      Detectable object Non-ferrous metal (Does not detect ferrous metal.)
      Standard sensing object Aluminum: 18 × 18 × 1 mm Aluminum: 30 × 30 × 1 mm
      Response frequency * 70 Hz
      Power supply voltage
      (operating voltage range)      		 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
      Current consumption 20 mA max.
      Control
      output      		 Load
      current      		 NPN open-collector output, 100 mA max. (at 30 VDC)
      Residual
      voltage      		 2 V max. (Load current: 100 mA, Cable length: 2 m)
      Indicators Detection indicator (red)
      Operation mode
      (with sensing object approaching)      		 Load ON: NO (Refer to Datasheet.)
      Protection circuits Reverse polarity protection, Load short-circuit protection, Surge suppressor
      Ambient temperature range Operating/Storage: -10 to 55°C (with no icing or condensation)
      Ambient humidity range Operating/Storage: 35% to 95% (with no condensation)
      Temperature influence ±20% max. of sensing distance at 23°C in the temperature range of -10 to 55°C
      Voltage influence ±2.5% max. of sensing distance at rated voltage in rated voltage ±15% range
      Insulation resistance 50 MΩ min. (at 500 VDC) between current-carrying parts and case
      Dielectric strength 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
      Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
      Shock resistance Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions
      Degree of protection IEC 60529 IP67, in-house standards: oil-resistant
      Connection method Pre-wired Models (Standard cable length: 2 m)
      Weight (packed state) Approx. 140 g Approx. 190 g
      Materials Case Nickel-plated brass
      Sensing
      surface      		 Heat-resistant ABS
      Clamping
      nuts      		 Nickel-plated brass
      Toothed
      washer      		 Zinc-plated iron
      Accessories —

      Note:* The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.

      Dimensions | Proximity Sensor Cylindrical – E2EY

      Note:Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified.

      E2EY-X4C1

      E2EY Dimensions 3 E2EY-X4C1_Dim

      E2EY-X8C1

      E2EY Dimensions 5 E2EY-X8C1_Dim

      Mounting Hole Dimensions

      E2EY Dimensions 7 E2EY_Dim

      คุณสมบัติ | Proximity Sensor Cylindrical – E2EY

      • ตรวจจับโลหะที่ไม่ใช่เหล็กเช่นอลูมิเนียมและทองเหลือง
      • ไม่ตรวจจับโลหะที่ใช่เหล็กและนิกเกิล

      คุณสมบัติ | Proximity Sensor Cylindrical – E2EY

      Proximity Sensor Cylindrical E2EY
      ประเภทรุ่น DC 3 สาย
      ระยะการตรวจจับ (มม.) 4, 8
      ขนาดตัวเรือน M18, M30
      วัสดุตัวเรือน โลหะ
      แหล่งจ่ายไฟ 12 – 24 VDC
      ระดับการป้องกัน IP67

      ติดต่อแผนก Automation & Robots

      Automation Department