Add to wishlist
E2EM
E2EM
E2EM
E2EM

OMRON Proximity Sensor – E2EM

    Long-distance detection at up to 30 mm enables secure mounting with reduced problems due to workpiece collisions. No polarity for easy wiring with DC 2-wire models.

    button

    Category:

      OMRON Proximity Sensor - E2EM

      E2EM (1)

      OMRON Proximity Sensor Cylindrical – E2EM

      Model Numbers | Proximity Sensor Cylindrical – E2EM

      Sensors

      DC 2-Wire, Pre-wired Models

      Appearance Sensing distance Model
      NO NC

      *1      		 M12 4 mm E2EM-X4X1 2M *2 E2EM-X4X2 2M
      M18 8 mm E2EM-X8X1 2M *2 E2EM-X8X2 2M
      M30 15 mm E2EM-X15X1 2M *2 E2EM-X15X2 2M
      M18 16 mm E2EM-X16MX1 2M E2EM-X16MX2 2M
      M30 30 mm E2EM-X30MX1 2M E2EM-X30MX2 2M

      *1. There are installation restrictions that apply to Shielded Sensors. Refer to Reference Influence of Surrounding Metal in Safety Precautions on Data Sheet.
      *2. Pre-wired M12 Connector Models with a cable length of 300 mm are also available. Add -M1J to the end of the model number (example: E2EM-X4X1-M1J).

      DC 3-Wire, Pre-wired Models

      Appearance Sensing distance Model
      Output configuration: NPN NO Output configuration: NPN NC

      *      		 M8 2 mm E2EM-X2C1 2M E2EM-X2C2 2M
      M12 4 mm E2EM-X4C1 2M E2EM-X4C2 2M
      M18 8 mm E2EM-X8C1 2M E2EM-X8C2 2M
      M30 15 mm E2EM-X15C1 2M E2EM-X15C2 2M

      * There are installation restrictions that apply to Shielded Sensors. Refer to Reference Influence of Surrounding Metal in
      Safety Precautions on Data Sheet.

      DC 3-Wire, M12 Connector Models

      Appearance Sensing distance Model
      Output configuration: NPN NO Output configuration: NPN NC

      *      		 M8 2 mm E2EM-X2C1-M1 E2EM-X2C2-M1
      M12 4 mm E2EM-X4C1-M1 E2EM-X4C2-M1
      M18 8 mm E2EM-X8C1-M1 E2EM-X8C2-M1
      M30 15 mm E2EM-X15C1-M1 E2EM-X15C2-M1

      * There are installation restrictions that apply to Shielded Sensors. Refer to Reference Influence of Surrounding Metal in
      Safety Precautions on Data Sheet.

      Accessories (Order Separately)

      Sensor I/O Connectors (M12, Sockets on One Cable End)

      (Models for Connectors and with Pre-wired Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.)

      Appearance Cable length Sensor I/O Connector model number Applicable Proximity Sensor model number
      2 m XS2F-D421-DC0-F E2EM-X[]C1-M1
      5 m XS2F-D421-GC0-F
      2 m XS2F-D421-D80-F E2EM-X[]C[]-M1
      5 m XS2F-D421-G80-F
      2 m XS2F-D422-DC0-F E2EM-X[]C1-M1
      5 m XS2F-D422-GC0-F
      2 m XS2F-D422-D80-F E2EM-X[]C[]-M1
      5 m XS2F-D422-G80-F

      Note: Refer to Introduction to Sensor I/O Connectors/Sensor Controllers for details.
      Use the XS2F-D42[]-[]CO-A for the E2EM-X[]X1-M1J. (Terminal 3: 0 V (+V), Terminal 4: +V (0 V))

      Specifications | Proximity Sensor Cylindrical – E2EM

      E2EM-X[]X[] DC 2-Wire Models

      Size M12 M18 M30
      Shielded Shielded Shielded Unshielded Shielded Unshielded
      Model E2EM-X4X[] E2EM-X8X[] E2EM-X16MX[] E2EM-X15X[] E2EM-X30MX[]
      Sensing distance 4 mm ±10% 8 mm ±10% 16 mm ±10% 15 mm ±10% 30 mm ±10%
      Set distance *1 0 to 3.2 mm 0 to 6.4 mm 0 to 12.8 mm 0 to 12 mm 0 to 24 mm
      Differential travel 15% max. of sensing distance
      Detectable object Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to
      Engineering Data on Data Sheet.)
      Standard sensing object Iron, 12 × 12 × 1 mm Iron, 18 × 18 × 1 mm Iron, 45 × 45 × 1 mm Iron, 30 × 30 × 1 mm Iron, 70 × 70 × 1 mm
      Response frequency *2 1 kHz 0.5 kHz 0.4 kHz 0.25 kHz 0.1 kHz
      Power supply voltage
      (operating voltage range)      		 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
      Leakage current 0.8 mA max.
      Control
      output      		 Load
      current      		 3 to 100 mA
      Residual
      voltage *3      		 5 V max. (Load current: 100 mA, Cable length: 2 m)
      Indicators X1 Models: Operation indicator (red), Setting indicator (green)
      X2 Models: Operation indicator (red)
      Operation mode
      (with sensing object
      approaching)      		 X1 Models: NO
      X2 Models: NC
      Refer to the timing charts under I/O Circuit Diagrams on Data Sheet for details.
      Protection circuits Surge suppressor, Load short-circuit protection
      Ambient temperature range Operating: -25 to 70°C, Storage: -40 to 85°C (with no icing or condensation)
      Ambient humidity range Operating/Storage: 35% to 95% (with no condensation)
      Temperature influence ±15% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
      Voltage influence ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
      Insulation resistance 50 MΩ min. (at 500 VDC) between current-carrying parts and case
      Dielectric strength 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
      Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
      Shock resistance Destruction: 1,000 m/s210 times each in X, Y, and Z directions
      Degree of protection IEC 60529 IP67, in-house standards: oil-resistant
      Connection method Pre-wired Models (Standard cable length: 2 m)
      Weight (packed state) Approx. 60 g Approx. 130 g Approx. 150 g Approx. 180 g Approx. 210 g
      Materials Case Nickel-plated brass
      Sensing
      surface      		 PBT
      Clamping
      nuts      		 Nickel-plated brass
      Toothed
      washer      		 Zinc-plated iron
      Accessories Instruction manual

      *1. Use the Sensor within the range in which the setting indicator (green LED) is ON (except X2 Models).
      *2. The response frequency is an average value.
      Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object and a set distance of half the sensing distance.
      *3. The residual voltage is 5 V. Make sure that the device connected to the Sensor can withstand the residual voltage. (Refer to Data Sheet for details.)

      E2EM-X[]C[] DC 3-Wire Models

      Size M8 M12 M18 M30
      Shielded Shielded Shielded Shielded Shielded
      Model E2EM-X2C[](-M1) E2EM-X4C[](-M1) E2EM-X8C[](-M1) E2EM-X15C[](-M1)
      Sensing distance 2 mm ±10% 4 mm ±10% 8 mm ±10% 15 mm ±10%
      Set distance 0 to 1.6 mm 0 to 3.2 mm 0 to 6.4 mm 0 to 12 mm
      Differential travel 10% max. of sensing distance
      Detectable object Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to
      Engineering Data on Data Sheet.)
      Standard sensing object Iron, 8 × 8 × 1 mm Iron, 12 × 12 × 1 mm Iron, 18 × 18 × 1 mm Iron, 30 × 30 × 1 mm
      Response frequency *1 1.5 kHz 0.5 kHz 0.3 kHz 0.1 kHz
      Power supply voltage
      (operating voltage range)
      *2      		 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
      Current consumption 13 mA max.
      Control
      output      		 Load
      current *2      		 200 mA max.
      Residual
      voltage      		 2 V max. (Load current: 200 mA, Cable length: 2 m)
      Indicators Operation indicator (yellow)
      Operation mode
      (with sensing object
      approaching)      		 C1 Models: NO
      C2 Models: NC
      Refer to the timing charts under I/O Circuit Diagrams on Data Sheet for details.
      Protection circuits Reverse polarity protection, Load short-circuit protection, Surge suppressor
      Ambient temperature
      range *1      		 Operating/Storage: -40 to 85°C (with no icing or condensation) Operating: -25 to 70°C
      Storage: -40 to 85°C
      (with no icing or
      condensation)
      Ambient humidity range Operating/Storage: 35% to 95% (with no condensation)
      Temperature influence ±15% max. of sensing distance at 23°C in the temperature
      range of -40 to 85°C
      ±10% max. of sensing distance at 23°C in the temperature
      range of -25 to 70°C      		 ±15% max. of sensing
      distance at 23°C in the
      temperature range of
      -25 to 70°C
      Voltage influence ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
      Insulation resistance 50 MΩ min. (at 500 VDC) between current-carrying parts and case
      Dielectric strength 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
      Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z
      directions
      Shock resistance Destruction: 500 m/s2
      10 times each in X, Y,
      and Z directions      		 Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions
      Degree of protection Pre-wired Models: IEC 60529 IP67, in-house standards: oil-resistant
      Connector Models: IEC 60529 IP67
      Connection method Pre-wired Models (Standard cable length: 2 m)
      Connector Models
      Weight
      (packed state)      		 Pre-wired Models Approx. 65 g Approx. 75 g Approx. 150 g Approx. 195 g
      Connector Models Approx. 15 g Approx. 25 g Approx. 40 g Approx. 90 g
      Materials Case Stainless steel
      (SUS303)      		 Nickel-plated brass
      Sensing
      surface      		 PBT
      Clamping
      nuts      		 Nickel-plated brass
      Toothed
      washer      		 Zinc-plated iron
      Accessories Instruction manual

      *1. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.
      *2. When using an M8 Model at an ambient temperature between 70 and 85°C, supply 10 to 30 VDC to the Sensor and make sure that the Sensor has a control output of 100 mA maximum.

      Dimensions | Proximity Sensor Cylindrical – E2EM

      Note:Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified.

      Pre-wired Models (Shielded)

      E2EM Dimensions 3 E2EM_Dim1

      E2EM-X2C[]

      E2EM Dimensions 4 E2EM-X2C[]_Dim

      E2EM-X8[][]

      E2EM Dimensions 7 E2EM-X8[][]_Dim

      E2EM-X4[][]

      E2EM Dimensions 5 E2EM-X4[][]_Dim

      E2EM-X15[][]

      E2EM Dimensions 8 E2EM-X15[][]_Dim

      Pre-wired Models
      (Unshielded)

      E2EM Dimensions 10 E2EM__Dim2

      E2EM-X16MX[]

      E2EM Dimensions 12 E2EM-X16MX[]_Dim

      E2EM-X30MX[]

      E2EM Dimensions 14 E2EM-X30MX[]_Dim

      Connector Models
      (Shielded )

      E2EM Dimensions 16 E2EM_Dim3

      E2EM-X2C[]-M1

      E2EM Dimensions 17 E2EM-X2C[]-M1_Dim

      E2EM-X8C[]-M1

      E2EM Dimensions 19 E2EM-X8C[]-M1_Dim

      E2EM-X4C[]-M1

      E2EM Dimensions 18 E2EM-X4C[]-M1_Dim

      E2EM-X15C[]-M1

      E2EM Dimensions 20 E2EM-X15C[]-M1_Dim

      คุณสมบัติ | Proximity Sensor Cylindrical – E2EM

      • การตรวจจับระยะไกลมากกว่า 30 มม. ช่วยให้สามารถติดตั้งได้อย่างปลอดภัยและลดปัญหาเนื่องจากการชนกันของชิ้นงาน
      • ไม่มีขั้วเพื่อให้ง่ายต่อการเดินสายกับโมเดลแบบ DC 2 สาย
      • ตัวป้องกันสายเคเบิล มีคุณสมบัติตามมาตรฐาน

      คุณสมบัติ | Proximity Sensor Cylindrical – E2EM

      Proximity Sensor Cylindrical E2EM
      ประเภทรุ่น DC 2 สาย, DC 3 สาย
      ระยะการตรวจจับ (มม.) 2, 4, 8, 15, 16, 30
      ขนาดตัวเรือน M8, M12, M18, M30
      วัสดุตัวเรือน โลหะ
      แหล่งจ่ายไฟ 12 – 24 VDC
      ระดับการป้องกัน IP67

      ติดต่อแผนก Automation & Robots

      Automation Department