OMRON Proximity Sensor - TL-N/Q
OMRON Proximity Sensor Rectangular – TL-N/Q
Model Numbers | Proximity Sensor Rectangular – TL-N/Q
Sensors
DC 2-Wire Models
| Appearance | Sensing distance | Model | ||
|---|---|---|---|---|
| Operation mode | ||||
| NO | NC | |||
Unshielded |
17 × 17 | 5 mm | TL-Q5MD1 2M *1 *2 | TL-Q5MD2 2M *1 |
| 25 × 25 | 7 mm | TL-N7MD1 2M *1 | TL-N7MD2 2M *1 | |
| 30 × 30 | 12 mm | TL-N12MD1 2M *1 | TL-N12MD2 2M *1 | |
| 40 × 40 | 20 mm | TL-N20MD1 2M *1 | TL-N20MD2 2M *1 | |
*1. Models with a different frequency are available to prevent mutual interference. The model numbers are TL-N[]MD[]5 and
TTL-Q5MD[]5 (e.g., TL-N7MD15).
*2. Models are also available with robotics (bend resistant) cables . Add “-R” to the model number. (e.g., TL-Q5MD1-R 2M)
DC 3-Wire and AC 2-Wire Models
| Appearance | Sensing distance | Output configuration | Model | ||
|---|---|---|---|---|---|
| Operation mode | |||||
| NO | NC | ||||
Unshielded |
8 × 9 | 2 mm | DC 3-wire, NPN | TL-Q2MC1 2M | — |
| 17 × 17 | 5 mm | TL-Q5MC1 2M *1 *2 | TL-Q5MC2 2M | ||
| DC 3-wire, PNP | TL-Q5MB1 2M | — | |||
| 25 × 25 | 5 mm | DC 3-wire, NPN | TL-N5ME1 2M *1 *2 | TL-N5ME2 2M *1 | |
| AC 2-wire | TL-N5MY1 2M *1 | TL-N5MY2 2M *1 | |||
| 30 × 30 | 10 mm | DC 3-wire, NPN | TL-N10ME1 2M *1 *2 | TL-N10ME2 2M *1 | |
| DC 3-wire, PNP | TL-N10MF1 2M *1 | — | |||
| AC 2-wire | TL-N10MY1 2M *1 | TL-N10MY2 2M *1 | |||
| 40 × 40 | 20 mm | DC 3-wire, NPN | TL-N20ME1 2M *1 *2 | TL-N20ME2 2M *1 | |
| AC 2-wire | TL-N20MY1 2M *1 | TL-N20MY2 2M *1 | |||
*1. Models with a different frequency are available to prevent mutual interference. The model numbers are TL-[][]M[][]5
(e.g., TL-N5ME15).
*2. Models are also available with robotics (bend resistant) cables . Add “-R” to the model number. (e.g., TL-Q5MC1-R 2M)
Accessories (Order Separately)
Mounting Brackets
A Mounting Bracket is provided with the Sensor depending on the model number. Check the column for the applicable Sensor.
| Type | Model | Applicable Sensors | |
|---|---|---|---|
| Provided with these Sensors | Order separately | ||
| Mounting Brackets | Y92E-C5 | TL-N5ME[], TL-N7MD[] | TL-N5MY[] |
| Y92E-C10 | TL-N10ME[], TL-N12MD[], TL-N10MF1[] |
TL-N10MY[] | |
| Y92E-C20 | TL-N20ME[], TL-N20MD[] | TL-N20MY[] | |
| Mounting Brackets for Conduits | Y92E-N5C15 | — | TL-N5ME[], TL-N5MY[] |
| Y92E-N10C15 | — | TL-N10ME[], TL-N10MY[] | |
Specifications | Proximity Sensor Rectangular – TL-N/Q
DC 2-Wire Models
| Model | TL-Q5MD[] | TL-N7MD[] | TL-N12MD[] | TL-N20MD[] | |
|---|---|---|---|---|---|
| Sensing distance | 5 mm ±10% | 7 mm ±10% | 12 mm ±10% | 20 mm ±10% | |
| Set distance | 0 to 4 mm | 0 to 5.6 mm | 0 to 9.6 mm | 0 to 16 mm | |
| Differential travel | 10% max. of sensing distance | ||||
| Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on Data Sheet.) |
||||
| Standard sensing object | Iron, 18 × 18 × 1 mm |
Iron, 30 × 30 × 1 mm |
Iron, 40 × 40 × 1 mm |
Iron, 50 × 50 × 1 mm |
|
| Response frequency * | 500 Hz | 300 Hz | |||
| Power supply voltage (operating voltage range) |
12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max. | ||||
| Leakage current | 0.8 mA max. | ||||
| Control output |
Load current | 3 to 100 mA | |||
| Residual voltage |
3.3 V max. (Load current: 100 mA, Cable length: 2 m) | ||||
| Indicators | D1 Models: Operation indicator (red), Setting indicator (green) D2 Models: Operation indicator (red) |
||||
| Operation mode (with sensing object approaching) |
D1 Models: NO, D2 Models: NC Refer to the timing charts under I/O Circuit Diagrams on Catalog for details. |
||||
| Protection circuits | Load short-circuit protection, Surge suppressor | ||||
| Ambient temperature range | Operating/Storage: -25 to 70°C (with no icing or condensation) | ||||
| Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) | ||||
| Temperature influence | ±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C | ||||
| Voltage influence | ±2.5% max. of sensing distance at rated voltage in the rated voltage ±15% range | ||||
| Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | ||||
| Dielectric strength | 1,000 VAC for 1 min between current-carrying parts and case | ||||
| Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||||
| Shock resistance | Destruction: 500 m/s2 3 times each in X, Y, and Z directions |
Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions | |||
| Degree of protection | IEC 60529 IP67, in-house standards: oil-resistant | ||||
| Connection method | Pre-wired Models (Standard cable length: 2 m) | ||||
| Weight (packed state) | Approx. 85 g | Approx. 165 g | Approx. 235 g | Approx. 330 g | |
| Materials | Case | Heat-resistant ABS | |||
| Sensing surface |
|||||
| Accessories | Instruction manual | Mounting Bracket, Mounting phillips screws (M4 × 25), Instruction manual |
Mounting Bracket, Mounting phillips screws (M4 × 30), Instruction manual |
Mounting Bracket, Mounting phillips screws (M5 × 40), Instruction manual |
|
* The response frequency is an average value.
Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and
a set distance of half the sensing distance.
DC 3-Wire Models
| Model | TL-Q2MC1 | TL-Q5MC[]/TL-Q5MB1 | |
|---|---|---|---|
| Sensing distance | 2 mm ±15% | 5 mm ±10% | |
| Set distance | 0 to 1.5 mm | 0 to 4 mm | |
| Differential travel | 10% max. of sensing distance | ||
| Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on Data Sheet.) |
||
| Standard sensing object | Iron, 8 × 8 × 1 mm | Iron, 15 × 15 × 1 mm | |
| Response time | — | 2 ms max. | |
| Response frequency * | 500 Hz | ||
| Power supply voltage (operating voltage range) |
12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max. | ||
| Current consumption | 15 mA max. at 24 VDC (no-load) | 10 mA max. at 24 VDC | |
| Control output |
Load current | NPN open collector 100 mA max. at 30 VDC max. |
TL-Q5MC[]: NPN open collector, 50 mA max. at 30 VDC max. TL-Q5MB[]: PNP open collector, 50 mA max. at 30 VDC max. |
| Residual voltage | 1 V max. (under load current of 100 mA with cable length of 2 m) |
1 V max. (under load current of 50 mA with cable length of 2 m) |
|
| Indicators | Detection indicator (red) | ||
| Operation mode (with sensing object approaching) |
NO | B1/C1 Models: NO C2 Models: NC |
|
| Refer to the timing charts under DC 3-Wire Models on Catalog for details. | |||
| Protection circuits | Reverse polarity protection, Surge suppressor | ||
| Ambient temperature range | Operating/Storage: -10 to 60°C (with no icing or condensation) |
Operating/Storage: -25 to 70°C (with no icing or condensation) |
|
| Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) | ||
| Temperature influence | ±10% max. of sensing distance at 23°C in the temperature range of -10 to 60°C |
±20% max. of sensing distance at 23°C in the temperature range of -25 to 70°C |
|
| Voltage influence | ±2.5% max. of sensing distance at rated voltage in rated voltage ±10% range | ||
| Insulation resistance | 50 MΩ min. (at 500 VDC) between current- carrying parts and case |
5 MΩ min. (at 500 VDC) between current- carrying parts and case |
|
| Dielectric strength | 1,000 VAC for 1 min between current- carrying parts and case |
500 VAC, 50/60 Hz for 1 min between current-carrying parts and case |
|
| Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
||
| Shock resistance | Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions |
Destruction: 200 m/s2 10 times each in X, Y, and Z directions |
|
| Degree of protection | IEC 60529 IP67, in-house standards: oil-resistant |
IEC IP67 | |
| Connection method | Pre-wired Models (Standard cable length: 2 m) | ||
| Weight (packed state) | Approx. 60 g | Approx. 90 g | |
| Materials | Case | Heat-resistant ABS | |
| Sensing surface | |||
| Accessories | Instruction manual | — | |
* The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a
distance of twice the standard sensing object, anda set distance of half the sensing distance.
| Model | TL-N5ME[] TL-N5MY[] |
TL-N10ME[] TL-N10MY[] TL-N10MF1 |
TL-N20ME[] TL-N20MY[] |
|
|---|---|---|---|---|
| Sensing distance | 5 mm ±10% | 10 mm ±10% | 20 mm ±10% | |
| Set distance | 0 to 4 mm | 0 to 8 mm | 0 to 16 mm | |
| Differential travel | 15% max. of sensing distance | |||
| Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on Data Sheet.) |
|||
| Standard sensing object | Iron, 30 × 30 × 1 mm | Iron, 40 × 40 × 1 mm | Iron, 50 × 50 × 1 mm | |
| Response frequency *1 | E/F Models: 500 Hz Y Models: 10 Hz |
E Models: 40 Hz Y Models: 10 Hz |
||
| Power supply voltage *2 (operating voltage range) |
E/F Models: 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max. Y Models: 100 to 220 VAC (90 to 250 VAC), 50/60 Hz |
|||
| Current consumption | E/F Models: 8 mA max. at 12 VDC, 15 mA max. at 24 VDC | |||
| Leakage current | Y Models: Refer to Engineering Data on Catalog. | |||
| Control output |
Load current | E/F Models: 100 mA max. at 12 VDC, 200 mA max. at 24 VDC Y Models: 10 to 200 mA |
||
| Residual voltage | E/F Models: 1 V max. (load current: 200 mA) Y Models: Refer to Engineering Data on Catalog. |
|||
| Indicators | E/F Models: Detection indicator (red) Y Models: Operation indicator (red) |
|||
| Operation mode (with sensing object approaching) |
E1/F1/Y1 Models: NO E2/Y2 Models: NC |
|||
| Refer to the timing charts under I/O Circuit Diagrams onCatalog for details. | ||||
| Protection circuits | E Models: Reverse polarity protection, Surge suppressor Y Models: Surge suppressor |
|||
| Ambient temperature range | Operating/Storage: -25 to 70°C (with no icing or condensation) | |||
| Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) | |||
| Temperature influence | ±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C | |||
| Voltage influence | E/F Models: ±2.5% max. of sensing distance at rated voltage in rated voltage ±10% range Y Models: ±1% max. of sensing distance at rated voltage in rated voltage ±10% range |
|||
| Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | |||
| Dielectric strength | E/F Models: 1,000 VAC, 50/60 Hz for 1 min between current-carrying parts and case Y Models: 2,000 VAC, 50/60 Hz for 1 min between current-carrying parts and case |
|||
| Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
|||
| Shock resistance | Destruction: 500 m/s2 10 times each in X, Y, and Z directions | |||
| Degree of protection | IEC 60529 IP67, in-house standards: oil-resistant | |||
| Connection method | Pre-wired Models (Standard cable length: 2 m) | |||
| Weight (packed state) | Approx. 190 g | Approx. 240 g | Approx. 340 g | |
| Materials | Case | Heat-resistant ABS | ||
| Sensing surface | ||||
| Accessories | E Models: Mounting Bracket, Mounting phillips screws (M4 × 25), Instruction manual Y Models: Instruction manual |
E/F Models: Mounting Bracket, Mounting phillips screws (M4 × 30), Instruction manual Y Models: Instruction manual |
E Models: Mounting Bracket, Mounting phillips screws (M5 × 40), Instruction manual Y Models: Instruction manual |
|
*1. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a
distance of twice the standard sensing object, anda set distance of half the sensing distance.
*2. E Models (DC switching models): A full-wave rectification power supply of 24 VDC ±10% (average value) can be used.
Dimensions | Proximity Sensor Rectangular – TL-N/Q
Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified.
Sensors
TL-Q2MC1
* 2.9-dia. vinyl-insulated round cable with 3 conductors
(Conductor cross section: 0.15 mm2, Insulator diameter: 0.9 mm), Standard length: 2 m
TL-Q5M[][]
*1. B/C Models: 4-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.2 mm2,
Insulator diameter: 1.2 mm), Standard length: 2 m
D Models: 4-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.3 mm2,
Insulator diameter: 1.3 mm), Standard length: 2 m
*2. B/C Models: Detection indicator (red)
D Models: Operation indicator (red), Setting indicator (green)
TL-N7MD[], TL-N5ME[]
*1. D Models: 6-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.5 mm2,
Insulator diameter: 1.9 mm), Standard length: 2 m
E Models: 6-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.5 mm2,
Insulator diameter: 1.9 mm), Standard length: 2 m
*2. D1 Models: Operation indicator (red), Setting indicator (green)
D2 Models: Operation indicator (red)
E Models: Detection indicator (red)
TL-N5MY[]
* 6-dia. vinyl-insulated round cable with 2 conductors
(Conductor cross section: 0.5 mm2, Insulator diameter: 1.9 mm), Standard length: 2 m
TL-N12MD[], TL-N10ME[], TL-N10MY[]
*1. D/Y Models: 6-dia. vinyl-insulated round cable with 2 conductors
(Conductor cross section: 0.5 mm2, Insulator diameter: 1.9 mm), Standard length: 2 m
E/Y Models: 6-dia. vinyl-insulated round cable with 3 conductors
(Conductor cross section: 0.5 mm2, Insulator diameter: 1.9 mm), Standard length: 2 m
*2. D1 Models: Operation indicator (red) and Setting indicator (green)
D2 Models: Operation indicator (red)
E/Y Models: Detection indicator (red)
Y Models: Operation indicator (red)
TL-N20MD[], TL-N20ME[], TL-N20MY[]
*1. D/Y Models: 6-dia. vinyl-insulated round cable with 2 conductors
(Conductor cross section: 0.5 mm2, Insulator diameter: 1.9 mm), Standard length: 2 m
E Models: 6-dia. vinyl-insulated round cable with 3 conductors
(Conductor cross section: 0.5 mm2, Insulator diameter: 1.9 mm), Standard length: 2 m
*2. D1 Models: Operation indicator (red) and Setting indicator (green)
D2 Models: Operation indicator (red)
E Models: Detection indicator (red)
Y Models: Operation indicator (red)
Accessories (Order Separately)
Mounting Bracket
Y92E-C5
Applicable Models: TL-N5ME[] *2
Applicable Models: TL-N5MY[]
Applicable Models: TL-N7MD[] *2
Material: Mounting Bracket: Zinc-plated iron
Mounting Pan-head Phillips Screws: Nickel-plated iron (Size: M4, Length: 25 mm)
Y92E-C10
Applicable Models: TL-N10ME[] *2
Applicable Models: TL-N10MY[]
Applicable Models: TL-N12MD[] *2
Material: Mounting Bracket: Zinc-plated iron
Mounting Pan-head Phillips Screws: Nickel-plated iron (Size: M4, Length: 30 mm)
Y92E-C20
Applicable Models: TL-N20ME[] *2
Applicable Models: TL-N20MY[]
Applicable Models: TL-N20MD[] *2
Material: Mounting Bracket: Zinc-plated iron
Mounting Pan-head Phillips Screws: Nickel-plated iron (Size: M5, Length: 40 mm)
*1. These are the mounting dimensions of the base of the Mounting Bracket.
*2. Provided with the product.
Mounting Brackets for Wiring Conduit Use (Sold Separately)
Y92E-N5C15
Applicable Models: TL-N5ME[]
Applicable Models: TL-N5MY[]
Applicable Models: TL-N7MD[]
Material: Zinc-plated iron
Y92E-N10C15
Applicable Models: TL-N10ME[]
Applicable Models: TL-N10MY[]
Applicable Models: TL-N12MD[]
Material: Zinc-plated iron
คุณสมบัติ | Proximity Sensor Rectangular – TL-N/Q
- ง่ายต่อการติดตั้ง
- เครื่องกำเนิดพัลส์ความเร็วสูง
- ควบคุมการหมุนความเร็วสูง
- ยึดกับโลหะโดยตรง (โมเดล -N)
- โมเดลมากมายที่เหมาะสำหรับควบคุมขีดจำกัด, ควบคุมการนับ และการใช้งานอื่นๆ (โมเดล -N)
คุณสมบัติ | Proximity Sensor Rectangular – TL-N/Q
| Proximity Sensor Rectangular | TL-N/Q |
|---|---|
| ประเภทรุ่น | DC 2 สาย, DC 3 สาย, AC 2 สาย |
| ระยะการตรวจจับ (มม.) | 2, 5, 7, 10, 12, 20 |
| ขนาดตัวเรือน | สี่เหลี่ยม |
| วัสดุตัวเรือน | พลาสติก |
| แหล่งจ่ายไฟ | 12 – 24 VDC |
| ระดับการป้องกัน | IP67 |
ติดต่อแผนก Automation & Robots
