OMRON Safety Light Curtain – F3SG-SR / PG series

ม่านแสงนิรภัย พร้อมประสิทธิภาพในการวางแนวที่ดีขึ้น การวิเคราะห์ขั้นสูง และช่วยลดต้นทุนในการติดตั้ง

สอดคล้องตามมาตรฐานสากล
Area Beam Indicators: มีไฟแสดงสถานะ 3 สี สำหรับตรวจสอบสถานะที่ง่าย และรวดเร็ว
ทนต่อสภาพแวดล้อม เช่น ห้องเย็น งานโลหะ(ละอองน้ำมัน) แปรรูปอาหาร
สามารถสำรอง และกู้คืนการตั้งค่าได้ ทำให้ลดเวลาการบำรุงรักษา 90%
ความสูงของม่านแสงนิรภัย เพิ่มได้ตั้งแต่ 40-1000 มิลลิเมตร
ง่ายต่อตรวจสอบข้อมูลระยะไกล
สามารถตรวจจับ และป้องกันได้ตั้งแต่นิ้วมือ จนถึง ร่างกาย

Category: Light Curtains

Description

OMRON Safety Light Curtain – F3SG-SR / PG series

Model Numbers | Safety Light Curtain – F3SG-SR / PG series

F3SG-SR

Model Number Legend

Safety Light Curtain F3SG-SR

F3SG-SR / PG Series Lineup 3

Ordering Information

Main Units

Safety Light Curtain F3SG-SR

* Emitters and receivers will be available separately.
Example 1) Emitter: F3SG-4SRA0160-14-L, receiver: F3SG-4SRA0160-14-D
Example 2) Receiver (flexible height model) only: F3SG-4SRA0200-14-D-F

Finger protection (Detection capability: 14-mm dia.)

Number of beams	Protective height (mm)	Advanced	Standard
Number of beams	Protective height (mm)	Model	Model
15	160	F3SG-4SRA0160-14	F3SG-4SRB0160-14
19	200	F3SG-4SRA0200-14-F	F3SG-4SRB0200-14-F
23	240	F3SG-4SRA0240-14	F3SG-4SRB0240-14
27	280	F3SG-4SRA0280-14-F	F3SG-4SRB0280-14-F
31	320	F3SG-4SRA0320-14	F3SG-4SRB0320-14
35	360	F3SG-4SRA0360-14-F	F3SG-4SRB0360-14-F
39	400	F3SG-4SRA0400-14	F3SG-4SRB0400-14
43	440	F3SG-4SRA0440-14-F	F3SG-4SRB0440-14-F
47	480	F3SG-4SRA0480-14	F3SG-4SRB0480-14
51	520	F3SG-4SRA0520-14-F	F3SG-4SRB0520-14-F
55	560	F3SG-4SRA0560-14	F3SG-4SRB0560-14
59	600	F3SG-4SRA0600-14-F	F3SG-4SRB0600-14-F
63	640	F3SG-4SRA0640-14	F3SG-4SRB0640-14
67	680	F3SG-4SRA0680-14-F	F3SG-4SRB0680-14-F
71	720	F3SG-4SRA0720-14-F	F3SG-4SRB0720-14-F
75	760	F3SG-4SRA0760-14-F	F3SG-4SRB0760-14-F
79	800	F3SG-4SRA0800-14	F3SG-4SRB0800-14
83	840	F3SG-4SRA0840-14-F	F3SG-4SRB0840-14-F
87	880	F3SG-4SRA0880-14-F	F3SG-4SRB0880-14-F
91	920	F3SG-4SRA0920-14-F	F3SG-4SRB0920-14-F
95	960	F3SG-4SRA0960-14-F	F3SG-4SRB0960-14-F
99	1,000	F3SG-4SRA1000-14	F3SG-4SRB1000-14
119	1,200	F3SG-4SRA1200-14	F3SG-4SRB1200-14
139	1,400	F3SG-4SRA1400-14	F3SG-4SRB1400-14
159	1,600	F3SG-4SRA1600-14	F3SG-4SRB1600-14
179	1,800	F3SG-4SRA1800-14	F3SG-4SRB1800-14
199	2,000	F3SG-4SRA2000-14	F3SG-4SRB2000-14

Hand protection (Detection capability: 25-mm dia.)

Number of beams	Protective height (mm)	Advanced	Standard
Number of beams	Protective height (mm)	Model	Model
8	160	F3SG-4SRA0160-25	F3SG-4SRB0160-25
10	200	F3SG-4SRA0200-25-F	F3SG-4SRB0200-25-F
12	240	F3SG-4SRA0240-25	F3SG-4SRB0240-25
14	280	F3SG-4SRA0280-25-F	F3SG-4SRB0280-25-F
16	320	F3SG-4SRA0320-25	F3SG-4SRB0320-25
18	360	F3SG-4SRA0360-25-F	F3SG-4SRB0360-25-F
20	400	F3SG-4SRA0400-25	F3SG-4SRB0400-25
22	440	F3SG-4SRA0440-25-F	F3SG-4SRB0440-25-F
24	480	F3SG-4SRA0480-25	F3SG-4SRB0480-25
26	520	F3SG-4SRA0520-25-F	F3SG-4SRB0520-25-F
28	560	F3SG-4SRA0560-25	F3SG-4SRB0560-25
30	600	F3SG-4SRA0600-25-F	F3SG-4SRB0600-25-F
32	640	F3SG-4SRA0640-25	F3SG-4SRB0640-25
34	680	F3SG-4SRA0680-25-F	F3SG-4SRB0680-25-F
36	720	F3SG-4SRA0720-25	F3SG-4SRB0720-25
38	760	F3SG-4SRA0760-25-F	F3SG-4SRB0760-25-F
40	800	F3SG-4SRA0800-25	F3SG-4SRB0800-25
42	840	F3SG-4SRA0840-25-F	F3SG-4SRB0840-25-F
44	880	F3SG-4SRA0880-25	F3SG-4SRB0880-25
46	920	F3SG-4SRA0920-25-F	F3SG-4SRB0920-25-F
48	960	F3SG-4SRA0960-25	F3SG-4SRB0960-25
50	1,000	F3SG-4SRA1000-25-F	F3SG-4SRB1000-25-F
52	1,040	F3SG-4SRA1040-25	F3SG-4SRB1040-25
56	1,120	F3SG-4SRA1120-25	F3SG-4SRB1120-25
60	1,200	F3SG-4SRA1200-25	F3SG-4SRB1200-25
64	1,280	F3SG-4SRA1280-25	F3SG-4SRB1280-25
68	1,360	F3SG-4SRA1360-25	F3SG-4SRB1360-25
72	1,440	F3SG-4SRA1440-25	F3SG-4SRB1440-25
76	1,520	F3SG-4SRA1520-25	F3SG-4SRB1520-25
80	1,600	F3SG-4SRA1600-25	F3SG-4SRB1600-25
84	1,680	F3SG-4SRA1680-25	F3SG-4SRB1680-25
88	1,760	F3SG-4SRA1760-25	F3SG-4SRB1760-25
92	1,840	F3SG-4SRA1840-25	F3SG-4SRB1840-25
96	1,920	F3SG-4SRA1920-25	F3SG-4SRB1920-25
104	2,080	F3SG-4SRA2080-25	F3SG-4SRB2080-25
114	2,280	F3SG-4SRA2280-25	F3SG-4SRB2280-25
124	2,480	F3SG-4SRA2480-25	F3SG-4SRB2480-25

Arm/Leg protection (Detection capability: 45-mm dia.)

Number of beams	Protective height (mm)	Advanced	Standard
Number of beams	Protective height (mm)	Model	Model
6	240	F3SG-4SRA0240-45	F3SG-4SRB0240-45
10	400	F3SG-4SRA0400-45	F3SG-4SRB0400-45
14	560	F3SG-4SRA0560-45	F3SG-4SRB0560-45
18	720	F3SG-4SRA0720-45	F3SG-4SRB0720-45
22	880	F3SG-4SRA0880-45	F3SG-4SRB0880-45
30	1,200	F3SG-4SRA1200-45	F3SG-4SRB1200-45
38	1,520	F3SG-4SRA1520-45	F3SG-4SRB1520-45

Body protection (Detection capability: 85-mm dia.)

Number of beams	Protective height (mm)	Advanced	Standard
Number of beams	Protective height (mm)	Model	Model
4	280	F3SG-4SRA0280-85	F3SG-4SRB0280-85
6	440	F3SG-4SRA0440-85	F3SG-4SRB0440-85
8	600	F3SG-4SRA0600-85	F3SG-4SRB0600-85
10	760	F3SG-4SRA0760-85	F3SG-4SRB0760-85
12	920	F3SG-4SRA0920-85	F3SG-4SRB0920-85

F3SG-PG

Model Number Legend

Safety Multi-Light Beam F3SG-PG

F3SG-SR / PG Series Lineup 13

Ordering Information

Main Units

Safety Multi-Light Beam F3SG-PG

* Emitters and receivers will be available separately.
Example 1) Emitter: F3SG-4PGA0670-2A-L, receiver: F3SG-4PGA0670-2A-D
Example 2) Emitter/receiver: F3SG-4PGA0670-2C-LD, passive mirror: F3SG-4PGA0670-2C-M

Perimeter access guarding (Beam gap: 300 to 500 mm)

Number of beams	Beam gap (mm)	Product length (mm)	Advanced
Number of beams	Beam gap (mm)	Product length (mm)	Model
2	500	670	F3SG-4PGA0670-2A
3	400	970	F3SG-4PGA0970-3A
4	300	1,070	F3SG-4PGA1070-4A
4	400	1,370	F3SG-4PGA1370-4A

Perimeter guarding long range (Beam gap: 300 to 500 mm)

Number of beams	Beam gap (mm)	Product length (mm)	Advanced
Number of beams	Beam gap (mm)	Product length (mm)	Model
2	500	670	F3SG-4PGA0670-2L
3	400	970	F3SG-4PGA0970-3L
4	300	1,070	F3SG-4PGA1070-4L
4	400	1,370	F3SG-4PGA1370-4L

Perimeter guarding passive mirror (Beam gap: 300 to 500 mm)

Number of beams	Beam gap (mm)	Product length (mm)	Advanced
Number of beams	Beam gap (mm)	Product length (mm)	Model
2	500	670	F3SG-4PGA0670-2C
4	300	1,070	F3SG-4PGA1070-4C
4	400	1,370	F3SG-4PGA1370-4C

F3SG-SR/PG Accessories

(Sold separately)

Bracket Common to F3SG-SR and F3SG-PG

Side mounting and backside mounting are possible.

For fixed mounting

Application	Appearance	Type	Model
Bracket to mount the F3SG-SR/PG. Side mounting and backside mounting possible. Beam alignment after mounting of F3SG-SR/PG not possible. Two brackets per set (See * below for the number of sets required for each model.)		Standard Bracket (Intermediate Bracket)	F39-LSGF

* Protective height of 0160 to 1440: 2 set (4 brackets), protective height of 1520 to 2480: 3 sets (6 brackets)

The bracket allows beam adjustment after the F3SG-SR/PG is mounted on it.

Application	Type	Model
The angle adjustment range is ±15°. Two brackets per set (See *1 below for the number of sets required for each model.)	Adjustable Side-Mount Bracket (Intermediate Bracket)	F39-LSGA
Use this bracket at the top and bottom positions of the F3SG-SR/PG. The angle adjustment range is ±22.5°. Use this bracket when replacing an existing F3SJ or F3SN Safety Light Curtain. Two brackets per set (See *2 below for the number of sets required for each model.)	Adjustable Top/Bottom Bracket F3SJ, F3SN Adapter	F39-LSGTB-SJ
Use this bracket at the top and bottom positions of the F3SG-SR/PG. The angle adjustment range is ±22.5°. Use this bracket when replacing an existing F3SG-RA/ RE Safety Light Curtain. Two brackets per set (See *2 below for the number of sets required for each model.)	Adjustable Top/Bottom Bracket F3SG-RA/RE Adapter	F39-LSGTB-RE
Use this bracket at the top and bottom positions of the F3SG-SR/PG. The angle adjustment range is ±22.5°. Use this bracket when replacing an existing MS4800 or F3SR Safety Light Curtain. Two brackets per set (See *2 below for the number of sets required for each model.)	Adjustable Top/Bottom Bracket MS4800, F3SR Adapter	F39-LSGTB-MS

*1. Protective height of 0160 to 0280: 1 set (2 brackets), protective height of 0320 to 1440: 2 sets (4 brackets),
protective height of 1520 to 2480: 3 sets (6 brackets)
*2. Using Adjustable Top/Bottom Brackets with Side-Mount Brackets (Intermediate Brackets) or Adjustable Side-Mount
Brackets (Intermediate Brackets)
Protective height of 0840 or less:
The Side-Mount Bracket (Intermediate Bracket) or Adjustable Side-Mount Bracket (Intermediate Bracket) is not
required. Use 2 sets of Adjustable Top/Bottom Brackets.
Protective height of 0880 to 1680:
Use 2 sets of Adjustable Top/Bottom Brackets and 1 set of Side-Mount Brackets (Intermediate Brackets) or Adjustable
Side-Mount Brackets (Intermediate Brackets).
Protective height of 1760 to 2480:
Use 2 sets of Adjustable Top/Bottom Brackets and 2 sets of Side-Mount Brackets (Intermediate Brackets) or Adjustable
Side-Mount Brackets (Intermediate Brackets).
Refer to Dimensions on Catalog and following.

Connecting Cable Common to F3SG-SR and F3SG-PG

[Root Cable]

Root-Straight Cable

Type	Cable length	Model
For emitter To sensors: dedicated connector, To external: open-ended type 5 wires Color: Gray	3 m	F39-JG3C-L
	7 m	F39-JG7C-L
	10 m	F39-JG10C-L
For receiver or emitter/receiver of F3SG-PG Perimeter Guarding Passive Mirror To sensors: dedicated connector, To external: open-ended type 8 wires Color: Black	3 m	F39-JG3C-D
	7 m	F39-JG7C-D
	10 m	F39-JG10C-D

Note: Cables are not included with the safety light curtain/safety multi-light beam.
Order the F39-JG[]C-[] Root-Straight Cable or F39-JGR3K-L/-D Root-Plug Cable for Extended.

Root-Plug Cable for Extended

Appearance	Type	Specifications	Cable length	Model
	For emitter To sensors: dedicated connector, To external: M12 connector type (5-pin) Color: Gray		0.3 m	F39-JGR3K-L
	For receiver or emitter/receiver of F3SG-PG Perimeter Guarding Passive Mirror To sensors: dedicated connector, To external: M12 connector type (8-pin) Color: Black		0.3 m	F39-JGR3K-D

Note: 1. Cables are not included with the safety light curtain/safety multi-light beam.
Order the F39-JG[]C-[] Root-Straight Cable or F39-JGR3K-L/-D Root-Plug Cable for Extended.
2. Use with the F39-JG[]A-[] Extended Socket-Straight Cable or F39-JG[]B-[] Extended Plug-Socket Cable.

[Extension Cable]

Extended Socket-Straight Cable

Type	Cable length	Model
For emitter M12 connector (5-pin), 5 wires Color: Gray	3 m	F39-JG3A-L
For emitter M12 connector (5-pin), 5 wires Color: Gray	10 m	F39-JG10A-L
For receiver or emitter/receiver of F3SG-PG Perimeter Guarding Passive Mirror M12 connector (8-pin), 8 wires Color: Black	3 m	F39-JG3A-D
	10 m	F39-JG10A-D

* When the accessory is used, protect it from cutting oil.
Note: 1. Use with the F39-JGR3K-L/-D Root-Plug Cable for Extended.
2. To extend the cable length to more than 10 m, connect the F39-JG[]B-[] Extended Plug-Socket Cable to the
F39-JG[]A-[] Extended Socket-Straight Cable.
3. Also available in 7, 15 and 20 m. For detail, contact your Omron representative.

Extended Plug-Socket Cable

Type	Cable length	Model
For emitter M12 connector (5-pin) on both ends Color: Gray	0.5 m	F39-JGR5B-L
	1 m	F39-JG1B-L
	3 m	F39-JG3B-L
	5 m	F39-JG5B-L
	7 m	F39-JG7B-L
	10 m	F39-JG10B-L
	15 m	F39-JG15B-L
	20 m	F39-JG20B-L
For receiver or emitter/receiver of F3SG-PG Perimeter Guarding Passive Mirror M12 connector (8-pin) on both ends Color: Black	0.5 m	F39-JGR5B-D
	1 m	F39-JG1B-D
	3 m	F39-JG3B-D
	5 m	F39-JG5B-D
	7 m	F39-JG7B-D
	10 m	F39-JG10B-D
	15 m	F39-JG15B-D
	20 m	F39-JG20B-D

* When the accessory is used, protect it from cutting oil.
Note: 1. Use with the F39-JGR3K-L/-D Root-Plug Cable for Extended.
2. To extend the cable length to more than 30 m, connect two or more F39-JG[]B-[] Extended Plug-Socket Cable to the
F39-JG[]A-[] Extended Socket-Straight Cable.
Example: To extend the cable length to 50 m, connect two F39-JG20B-[] (20 m) Extended Plug-Socket Cables and
one F39-JG10A-[] (10 m) Extended Socket-Straight Cable.

F3SG-SR / PG Series Lineup 37

Note: 3. Also available in 0.5, 1, 5, 7 and 15 m. For detail, contact your Omron representative.

[Cascading Cable]

Side-by-side Cascading Cable (Two cables per set, one for emitter and one for receiver)

Appearance	Type	Specifications	Cable length	Model
	For emitter To sensors: dedicated connector 1, To cascading sensors: dedicated connector 2 Color: Gray For receiver To sensors: dedicated connector 1, To cascading sensors: dedicated connector 2 Color: Black	Used to series-connect sensors with the minimum cable length of 12 cm. IP67 and IP67G (JIS C 0920 Annex 1) rated when mated.	12 cm	F39-JGR12L

Note: To extend the cable length between the series-connected sensors to more than 12 cm, add the F39-JGR3W
Cascading Cable for Extended.

Cascading Cable for Extended (Two cables per set, one for emitter and one for receiver)

Appearance	Type	Specifications	Cable length	Model
	For emitter To sensors: dedicated connector, To cascading sensors: M12 connector type (5 pin) Color: Gray For receiver To sensors: dedicated connector, To cascading sensors: M12 connector type (8 pin) Color: Black	Used together with the F39- JGR3K Root-Plug Cable for Extended to extend the cable length between the series- connected sensors to more than 12 cm. IP67 and IP67G (JIS C 0920 Annex 1) rated when mated.	0.3 m	F39-JGR3W

Note: To extend the cable length between the series-connected sensors to more than 60 cm, connect the F39-JG[]B-[]
Extended Plug-Socket Cable (up to 10 m: F39-JG10B-[]) to the F39-JGR3W Cascading Cable for Extended.
Extension cable between sensors: 10 m max. (not including Cascading Cable for Extended (F39-JGR3W) and
Root Cable (F39-JGR3K-L/-D).) F3SG-SR / PG Series Lineup 43

[Conversion Cable: Converting Wiring for Existing Light Curtain]

Conversion Cable

Specifications	Type	Cable length	Model
Used to convert the wiring for F3SJ-B/-A, F3SR-B or F3SN Safety Light Curtain to that for the F3SG-SR.	F3SJ-B/A Conversion Cable For emitter To sensor: dedicated connector 1, To wires for F3SJ-B/-A, F3SR or F3SN: M12 connector type (8 pin) Color: Gray	0.3 m	F39-JGR3K-SJ-L
	F3SJ-B/A Conversion Cable For receiver To sensor: dedicated connector 1, To wires for F3SJ-B/-A, F3SR or F3SN: M12 connector type (8 pin) Color: Black	0.3 m	F39-JGR3K-SJ-D
Used to convert the wiring for F3SG-RE Safety Light Curtain to that for the F3SG-SR.	F3SG-RE Conversion Cable For emitter To sensor: dedicated connector 1, To wires for F3SG-RE: M12 connector type (4 pin) Color: Gray	0.3 m	F39-JGR3K-RE-L
	F3SG-RE Conversion Cable For receiver To sensor: dedicated connector 1, To wires for F3SG-RE: M12 connector type (4 pin) Color: Black	0.3 m	F39-JGR3K-RE-D
Used to convert the wiring for MS4800 Safety Light Curtain to that for the F3SG-SR.	MS48 Conversion Cable For emitter To sensor: dedicated connector 1, To wires for MS4800: M12 connector type (5 pin) Color: Gray	0.3 m	F39-JGR3K-MS-L
	MS48 Conversion Cable For receiver To sensor: dedicated connector 1, To wires for MS4800: M12 connector type (8 pin) Color: Black	0.3 m	F39-JGR3K-MS-D

Note: 1. Cables are not included with the safety light curtain/safety multi-light beam.
When connecting to the cables of the existing light curtain, order the conversion cables.
Conversion cables are only for PNP connection. To use for NPN, connect the 24 VDC line and the 0 VDC line in
reverse. For details, refer to User’s Manual (Man. No. Z405). F3SG-SR / PG Series Lineup 46 Note: 2. Do not connect the Conversion Cable for the following purposes. Failure to do so may result in failure.
1. Connecting with the F39-SGIT-IL3, F39-GCNY2, F39-GCNY3 or F39-GCN5
2. Connecting between the F3SG-SR’s

Configuration Tool SD Manager 3 and Intelligent Tap

Configuration tool SD Manager 3

Type	Specifications
SD Manager 3	Configuration tool running on a PC. Use with the Intelligent Tap. (The Bluetooth® communication unit is required to connect using Bluetooth®.) For details, refer to your local Omron website.
SD Manager 3 Mobile APP	Monitoring tool running on a smartphone. Use with the Intelligent Tap and Bluetooth® communication unit. For details, refer to your local Omron website.

Intelligent Tap *

Specifications	Type	Model
Used to configure the F3SG-SR/PG and connect external devices via IO-Link. The F3SG-SR/PG can be configured on a PC or with the DIP switch on the Intelligent Tap. IP67 and IP67G (JIS C 0920 Annex 1) rated when mated.	Intelligent Tap	F39-SGIT-IL3
Mounted to the Intelligent Tap to connect with the SD Manager 3 via Bluetooth®. IP67 and IP67G (JIS C 0920 Annex 1) rated when mated. * For the regions where the Bluetooth® Communication Unit can be used, refer to Legislation and Standards on Catalog.	Bluetooth® Communication Unit	F39-SGBT
Bracket to mount the Intelligent Tap on a DIN track.	Intelligent Tap Bracket For DIN in Panel	F39-LITF1

Note: Please contact your OMRON sales representative regarding the IO-Link setup file (IODD file).
* Use the F39-SGBT Bluetooth® Communication Unit or a commercially available USB Type-C™ cable to connect to a PC.

Intelligent Tap-to-IO-Link Master Cable

Omron IO-Link master unit	Type	Cable length	Model
NX-ILM400	Single-ended cable M12 connector (5-pin), 5 wires Color: Gray	2 m	XS5F-D521-DJ0-IL
GX-ILM08C	Double-ended cable M12 connector (5-pin), 5 wires Color: Gray	3 m	F39-JG3B-L
		10 m	F39-JG10B-L
		20 m	F39-JG20B-L

* When the accessory is used, protect it from cutting oil.
Note: Use the F39-JG[]A-D Extended Socket-Straight Cable or F39-JG[]B-D Extended Plug-Socket Cable for safety output
(OSSD). F3SG-SR / PG Series Lineup 53

Reduced Wiring System

Y-Joint Plug/Socket Connector

Appearance	Type	Specifications	Cable length	Model
	M12 connectors. Used for reduced wiring. IP67*1 rated when mated.		0.5 m	F39-GCNY2

*1. When the accessory is used, protect it from cutting oil.
*2. Order the cable (root-plug cable for extended and extended cable) for emitter (end of model: -L) and the cable for
receiver (end of model: -D).

Reset Switch Connector

Appearance	Type	Specifications	Cable length	Model
	M12 connectors. Used for reduced wiring. IP67*1 rated when mated.		0.5 m	F39-GCNY3

Note: Purchase a reset switch (NC contact) separately.
*1. When the accessory is used, protect it from cutting oil.
*2. Order the extended socket-straight cable for receiver (end of model: -D).
*3. The External Device Monitoring (EDM) function cannot be used with this accessory.

Reset Switch Connector-to-Reset Switch Cable

Connector Connected to Cable, Socket on One Cable End

Type	Cable length	Model
M12 connector (4-pin), 4 wires	1 m	XS5F-D421-C80-F
	2 m	XS5F-D421-D80-F
	3 m	XS5F-D421-E80-F
	5 m	XS5F-D421-G80-F
	10 m	XS5F-D421-J80-F
	20 m	XS5F-D421-L80-F

* When the accessory is used, protect it from cutting oil.

Muting System

Muting Sensor E3Z (M8 Connector)

Sensing method	Sensing distance	Mounter	Output type	Model
Through-beam	10 m (Red light)	F39-FMA[][][]T	NPN output	E3Z-T66A
Through-beam	10 m (Red light)	F39-FMA[][][]T	PNP output	E3Z-T86A
Retro-reflective *1	4 m *2 (Red light)	F39-FMA[][][]R	NPN output	E3Z-R66
			PNP output	E3Z-R86
			Reflectors	E39-R1S

Note: The muting sensor arm mounter is not included with the muting sensor. Order the muting sensor arm mounter.
*1. The reflector is not included with the muting sensor. Order the E39-R1S Reflector when using the E3Z-R[]6
Retroreflective Muting Sensor.
*2. The minimum required distance between the E3Z Muting Sensor and reflector is 100 mm.
For details, refer to your local Omron website.

Muting Sensor Arm Mounter (Two mounters per set, for emitter and receiver)

Application	Length	Model
The through-beam muting sensor can be mounted easily.	150 mm	F39-FMA150T
The through-beam muting sensor can be mounted easily.	400 mm	F39-FMA400T
The retroreflective muting sensor can be mounted easily.	150 mm	F39-FMA150R
The retroreflective muting sensor can be mounted easily.	400 mm	F39-FMA400R

Note: 1. The muting sensor is not included with the muting sensor arm mounter. Order the Muting Sensor.
2. When mounting the muting sensor arm mounter to the safety light curtain, order the F39-LMAF1 Muting Sensor
Arm Mounter Bracket for SLC. When the muting sensor arm mounter is mounted to the floor mount column, no
brackets are required.

Muting Sensor Arm Mounter Bracket for SLC (Two brackets per set, for emitter and receiver) *

Appearance	Application	Model
	For F3SG-SR/PG	F39-LMAF1

Note: The F39-LMAF1 Muting Sensor Arm Mounter Bracket for SLC cannot be used for the F3SG-SR/PG with a product
length smaller than 280 mm.
* Order when mounting the muting sensor arm mounter to the safety light curtain. When the muting sensor arm mounter
is mounted to the floor mount column, no brackets are required.

Muting Sensor Connection Box

Appearance	Application	Specifications	Cable Length	Model
	Speeds up wiring muting sensors.	PNP/NPN selection Main Unit: M12 socket (5 pin) ×7, M12 socket (8 pin) ×1 Cable: M12 plug (8 pin) ×1 IP67*1 rated when mated.	0.5 m	F39-GCN5

*1. When the accessory is used, protect it from cutting oil.
*2. When using four muting sensors, order the E3Z-R[][] Muting Sensor (Retro-reflective) that can be connected to the
F39-GCN5 Muting Sensor Connection Box.

Connection Cable for Muting Sensor Connection Box

Application	Specifications	Cable Length	Model
Cable to connect the Muting Sensor and F39-GCN5 Muting Sensor Connection Box.	Connectors connected to cable, M8 socket and M12 plug on cable ends (4 pin)	0.2 m	XS3W-M42C-4C2-A
Sensor I/O Connectors Connectors with Cables, Connectors on Both Cable Ends (Socket/Plug)	Connectors connected to cable, M8 socket and M8 plug on cable ends (4 pin) Straight (socket, plug)	1 m	XS3W-M421-401-R
		2 m	XS3W-M421-402-R
		5 m	XS3W-M421-405-R
		10 m	XS3W-M421-410-R
Sensor I/O Connectors Connectors with Cables, Connectors on Both Cable Ends (Socket/Plug) Used together with the XS3W- M42C-4C2-A when the space to connect to the connector of the E3Z Muting Sensor is between 40 and 80 mm.	Connectors connected to cable, M8 socket and M8 plug on cable ends (4 pin) Right-angle (socket)/ straight (plug)	2 m	XS3W-M424-402-R
		5 m	XS3W-M424-405-R
Cable to connect the device for auxiliary output and F39-GCN5 Muting Sensor Connection Box	Connector connected to cable, M12 plug on one cable end (4 pin)	0.3 m	XS5H-D421-A80-F
		1 m	XS5H-D421-C80-F
		2 m	XS5H-D421-D80-F
		5 m	XS5H-D421-G80-F
Cable to connect the device for reset input and F39-GCN5 Muting Sensor Connection Box	Connector connected to cable, M12 plug on one cable end (5 pin)	0.3 m	XS2H-D521-AG0-A
		1 m	XS2H-D521-CG0-A

Note: 1. Select the same output type for both the safety light curtain/safety multi-light beam (PNP/NPN selection by wiring)
and muting sensor (PNP or NPN model).
2. For details of the XS3W, XS5H and XS2H cables with connector(s), refer to your local OMRON website.
3. Use the F39-JG[]B-D Extended Plug-Socket Cable to connect the muting sensor connection box with the Intelligent
Tap.
The connection example for optical synchronization is shown below.

F3SG-SR / PG Series Lineup 72

Floor Mount System

Floor Mount Column

Appearance	Applicable light curtain		Column height	Model
Appearance	F3SG-SR Safety Light Curtain	F3SG-PG Safety Multi-Light Beam	Column height	Model
	Protective height up to 0880	F3SG-4PGA0670-2[]	990 mm	F39-ST0990
	Protective height up to 1280	F3SG-4PGA0970-3A/3L F3SG-4PGA1070-4[]	1,310 mm	F39-ST1310
	Protective height up to 1520	F3SG-4PGA1370-4[]	1,630 mm	F39-ST1630
	Protective height up to 1840	—	1,950 mm	F39-ST1950
	Protective height up to 2080	—	2,270 mm	F39-ST2270

*1. Floor Mount Column, Mirror Column, Mount-Column Adjustable Base: Each model includes one product.
When using for both the emitter and receiver, order two sets.
*2. The mount-column adjustable base is sold separately.

Mirror Column

Appearance	Applicable light curtain		Column height	Model
Appearance	F3SG-SR Safety Light Curtain	F3SG-PG Safety Multi-Light Beam	Column height	Model
(Operating range becomes 15% shorter than the rating)	Protective height up to 0880	F3SG-4PGA0670-2A/2L	990 mm	F39-SML0990
	Protective height up to 1200	F3SG-4PGA0970-3A/3L F3SG-4PGA1070-4A/4L	1,310 mm	F39-SML1310
	Protective height up to 1520	F3SG-4PGA1370-4A/4L	1,630 mm	F39-SML1630
	Protective height up to 1840	—	1,950 mm	F39-SML1950
(Operating range becomes 10% shorter than the rating)	—	F3SG-4PGA0670-2A/2L	990 mm	F39-PML0990-2
	—	F3SG-4PGA0970-3A/3L	1,310 mm	F39-PML1310-3
	—	F3SG-4PGA1070-4A/4L	1,310 mm	F39-PML1310-4
	—	F3SG-4PGA1370-4A/4L	1,630 mm	F39-PML1630-4

Note: The F3SG-SR Safety Light Curtain with the protective height of 1920 or more cannot be used.
*1. Floor Mount Column, Mirror Column, Mount-Column Adjustable Base: Each model includes one product.
When using for both the emitter and receiver, order two sets.
*2. The mount-column adjustable base is sold separately.

Mount-Column Adjustable Base

Appearance	Application	Model
	Mounted to the floor mount column or mirror column. The angle and height of the column can be adjusted.	F39-STB

*1. Floor Mount Column, Mirror Column, Mount-Column Adjustable Base: Each model includes one product.
When using for both the emitter and receiver, order two sets.
*2. The floor mount column and mirror column are sold separately.

Other Optional Accessories Common to F3SG-SR and F3SG-PG

Laser Alignment Pointer

Appearance	Specifications	Model
	The laser alignment pointer is attached on the optical surface of the F3SG-SR/PG to help coarse adjustment of beams.	F39-PTG

Lamp

Appearance	Specifications	Model
	The lamp can be connected to emitter, receiver, or emitter/receiver and turned ON based on the operation of F3SG-SR/PG. The lamp can indicate red, orange, and green colors, to which three different states can be assigned. IP67 * rated when mated.	F39-SGLP

* When the accessory is used, protect it from cutting oil.
Note: The Lamp does not support Bluetooth® communication.

Optional Accessories for F3SG-SR (Note: Cannot be used on F3SG-PG.)

Spatter Protection Cover (2 covers per set, one for emitter and one for receiver)

Appearance	Safety light curtain			Model
Appearance	Finger protection	Hand protection	Arm/leg protection	Model
(Operating range becomes 10% shorter than the rating)	F3SG-4SR[]0160-14	F3SG-4SR[]0160-25	—	F39-HSG0160
	F3SG-4SR[]0240-14	F3SG-4SR[]0240-25	F3SG-4SR[]0240-45	F39-HSG0240
	F3SG-4SR[]0320-14	F3SG-4SR[]0320-25	—	F39-HSG0320
	F3SG-4SR[]0400-14	F3SG-4SR[]0400-25	F3SG-4SR[]0400-45	F39-HSG0400
	F3SG-4SR[]0480-14	F3SG-4SR[]0480-25	—	F39-HSG0480
	F3SG-4SR[]0560-14	F3SG-4SR[]0560-25	F3SG-4SR[]0560-45	F39-HSG0560
	F3SG-4SR[]0640-14	F3SG-4SR[]0640-25	—	F39-HSG0640
	—	F3SG-4SR[]0720-25	F3SG-4SR[]0720-45	F39-HSG0720
	F3SG-4SR[]0800-14	F3SG-4SR[]0800-25	—	F39-HSG0800
	—	F3SG-4SR[]0880-25	F3SG-4SR[]0880-45	F39-HSG0880
	F3SG-4SR[]0960-14-F	F3SG-4SR[]0960-25	—	F39-HSG0960
	—	F3SG-4SR[]1040-25	—	F39-HSG1040
	—	F3SG-4SR[]1120-25	—	F39-HSG1120
	F3SG-4SR[]1200-14	F3SG-4SR[]1200-25	F3SG-4SR[]1200-45	F39-HSG1200
	—	F3SG-4SR[]1280-25	—	F39-HSG1280
	—	F3SG-4SR[]1360-25	—	F39-HSG1360
	—	F3SG-4SR[]1440-25	—	F39-HSG1440
	—	F3SG-4SR[]1520-25	F3SG-4SR[]1520-45	F39-HSG1520
	F3SG-4SR[]1600-14	F3SG-4SR[]1600-25	—	F39-HSG1600
	—	F3SG-4SR[]1680-25	—	F39-HSG1680
	—	F3SG-4SR[]1760-25	—	F39-HSG1760
	—	F3SG-4SR[]1840-25	—	F39-HSG1840
	—	F3SG-4SR[]1920-25	—	F39-HSG1920

Note: Two or more spatter protection covers can be attached to the safety light curtain with a protective height not listed
above.
The F39-HSG0360 is also available for use together with other spatter protection covers.

Test Rod *

Appearance	Diameter	Model
—	14 mm	F39-TRD14
	25 mm	F39-TRD25
	30 mm	F39-TRD30

* When you need a test rod larger than 30 mm in diameter, prepare it by yourself.

F3SG-SR-K

Model Number Legend

IP69K Model F3SG-SR-K

F3SG-SR / PG Series Lineup 91

Ordering Information

Safety Light Curtain IP69K Model

Main Unit F3SG-SR-K

Finger protection (Detection capability: 14-mm dia.)

Number of beams	Protective height (mm)	Standard
Number of beams	Protective height (mm)	Model
31	320	F3SG-4SRB0320-14-K
39	400	F3SG-4SRB0400-14-K
47	480	F3SG-4SRB0480-14-K
55	560	F3SG-4SRB0560-14-K
63	640	F3SG-4SRB0640-14-K
71	720	F3SG-4SRB0720-14-K
79	800	F3SG-4SRB0800-14-K
87	880	F3SG-4SRB0880-14-K
95	960	F3SG-4SRB0960-14-K
99	1,000	F3SG-4SRB1000-14-K
119	1,200	F3SG-4SRB1200-14-K
139	1,400	F3SG-4SRB1400-14-K
159	1,600	F3SG-4SRB1600-14-K
179	1,800	F3SG-4SRB1800-14-K

Note: Connection cables are integrated with the safety light curtain.

Hand protection (Detection capability: 25-mm dia.)

Number of beams	Protective height (mm)	Standard
Number of beams	Protective height (mm)	Model
16	320	F3SG-4SRB0320-25-K
20	400	F3SG-4SRB0400-25-K
24	480	F3SG-4SRB0480-25-K
28	560	F3SG-4SRB0560-25-K
32	640	F3SG-4SRB0640-25-K
36	720	F3SG-4SRB0720-25-K
40	800	F3SG-4SRB0800-25-K
44	880	F3SG-4SRB0880-25-K
48	960	F3SG-4SRB0960-25-K
50	1,000	F3SG-4SRB1000-25-K
52	1,040	F3SG-4SRB1040-25-K
56	1,120	F3SG-4SRB1120-25-K
60	1,200	F3SG-4SRB1200-25-K
64	1,280	F3SG-4SRB1280-25-K
68	1,360	F3SG-4SRB1360-25-K
72	1,440	F3SG-4SRB1440-25-K
76	1,520	F3SG-4SRB1520-25-K
80	1,600	F3SG-4SRB1600-25-K
84	1,680	F3SG-4SRB1680-25-K
88	1,760	F3SG-4SRB1760-25-K
92	1,840	F3SG-4SRB1840-25-K

Note: Connection cables are integrated with the safety light curtain.

Accessories (Sold separately)

Optional Accessories for F3SG-SR-K

Bracket

Appearance	Type	Application	Model
Bracket to mount the F3SG-SR-K. 360° mounting including side mounting and backside mounting possible. Beam alignment after mounting of F3SG-SR/PG not possible. Two brackets per set		IP69K Model Mounting Bracket (Top/Bottom Bracket)	F39-LSGTB-K

Specifications | Safety Light Curtain – F3SG-SR / PG series

Safety Light Curtain/Safety Multi-Light Beam

F3SG-SR Main Unit

[][][][] in the model number indicates the protective height or product length in millimeters.

Model				Safety Light Curtain
Model				F3SG- []SRA[][][][] -14 F3SG- []SRB[][][][] -14	F3SG- []SRA[][][][] -25 F3SG- []SRB[][][][] -25	F3SG- []SRA[][][][] -45 F3SG- []SRB[][][][] -45	F3SG- []SRA[][][][] -85 F3SG- []SRB[][][][] -85
Perfor- mance	Object resolution (Detection capability)			Opaque objects
	Object resolution (Detection capability)			14-mm dia.	25-mm dia.	45-mm dia.	85-mm dia.
	Beam gap			10 mm	20 mm	40 mm	80 mm
	Number of beams			15 to 199	8 to 124	6 to 38	4 to 12
	Lens size			4.4 × 3.4 mm (W × H)	6.7 × 4.5 mm (W × H)
	Protective height			160 to 2,000 mm	160 to 2,480 mm	240 to 1,520 mm	280 to 920 mm
	Product length			—
	Operating range	Long		0.3 to 10.0 m (Typ. 15.0 m) *	0.3 to 20.0 m (Typ. 30.0 m)
		Short		0.3 to 3.0 m (Typ. 4.5 m) *	0.3 to 7.0 m (Typ.10.5 m)
		Short		* When operating at an ambient temperature of -10 to -30°C, use the F3SG-SR with the operating range of 0.3 to 5.0 m in Long Mode and 0.3 to 1.5 m in Short Mode.
	Response time *1	Normal mode	ON to OFF	Optical synchronization: 8 to 18 ms Wired synchronization: 10 to 21 ms	Optical synchronization: 8 to 13 ms Wired synchronization: 10 to 17 ms	Optical synchronization: 8 ms Wired synchronization: 10 ms
		Normal mode	OFF to ON	Optical synchronization: 40 to 90 ms Wired synchronization: 50 to 105 ms	Optical synchronization: 40 to 65 ms Wired synchronization: 50 to 85 ms	Optical synchronization: 40 ms Wired synchronization: 50 ms
		×2 Slow mode *2	ON to OFF	Optical synchronization: 16 to 36 ms Wired synchronization: 20 to 42 ms	Optical synchronization: 16 to 26 ms Wired synchronization: 20 to 34 ms	Optical synchronization: 16 ms Wired synchronization: 20 ms
		×2 Slow mode *2	OFF to ON	Optical synchronization: 80 to 180 ms Wired synchronization: 100 to 210 ms	Optical synchronization: 80 to 130 ms Wired synchronization: 100 to 170 ms	Optical synchronization: 80 ms Wired synchronization: 100 ms
		×4 Slow mode *2	ON to OFF	Optical synchronization: 32 to 72 ms Wired synchronization: 40 to 84 ms	Optical synchronization: 32 to 52 ms Wired synchronization: 40 to 68 ms	Optical synchronization: 32 ms Wired synchronization: 40 ms
		×4 Slow mode *2	OFF to ON	Optical synchronization: 160 to 360 ms Wired synchronization: 200 to 420 ms	Optical synchronization: 160 to 260 ms Wired synchronization: 200 to 340 ms	Optical synchronization: 160 ms Wired synchronization: 200 ms
		×8 Slow mode *2	ON to OFF	Optical synchronization: 64 to 144 ms Wired synchronization: 80 to 168 ms	Optical synchronization: 64 to 104 ms Wired synchronization: 80 to 136 ms	Optical synchronization: 64 ms Wired synchronization: 80 ms
		×8 Slow mode *2	OFF to ON	Optical synchronization: 320 to 720 ms Wired synchronization: 400 to 840 ms	Optical synchronization: 320 to 520 ms Wired synchronization: 400 to 680 ms	Optical synchronization: 320 ms Wired synchronization: 400 ms
		1. Response time when used in one segment system. Refer to Catalog. Refer to the User’s Manual (Man. No. Z405) for cascaded connection. 2. Selectable by SD Manager 3.
	Effective aperture angle (EAA) (IEC 61496-2)			±2.5° max. * Emitter and receiver at operating range of 3 m or greater.
	Light source			Infrared LEDs, Wavelength: 870 nm
	Startup waiting time			3 s max.
Elec- trical	Power supply voltage (Vs)			SELV/PELV 24 VDC±20% (ripple p-p 10% max.)
	Current consumption			Refer to Catalog.
	Safety outputs (OSSD)			Two PNP or NPN transistor outputs (PNP or NPN is selectable by wiring of power supply.) Load current: 300 mA max., Residual voltage: 2 V max. (except for voltage drop due to cable extension), Capacitive load: 1 μF max., Inductive load: 2.2 H max. 123 Leakage current: 1 mA max. (PNP), 2 mA max. (NPN) 4 1. For the F3SG-4SRA, the load current is 150 mA max. in 2- segment cascade and 80 mA max. in 3-segment cascade. 2. The residual voltage is 3 V max. when the Intelligent Tap is connected to the sensor. 3. The load inductance is the maximum value when the safety output frequently repeats ON and OFF. When you use the safety output at 4 Hz or less, the usable load inductance becomes larger. 4. These values must be taken into consideration when connecting elements including a capacitive load such as a capacitor.
	Auxiliary output			Two PNP or NPN transistor 1 outputs (PNP or NPN is selectable by wiring of power supply.) Load current: 100 mA max., Residual voltage: 2 V max. * * The residual voltage is 3 V max. when the Intelligent Tap is connected to the sensor.
	Output operation mode	Safety output		Light-ON (Safety outputs are turned to the ON state when the receiver receives an emitting signal.)
	Output operation mode	Auxiliary output		Safety output (Inverted signal output: Enable) (default) (Configurable by SD Manager 3)
	Input voltage	TEST		Light emission stops when connected to 24 VDC ON voltage: Vs-3 V to Vs (short circuit current: approx. 5.0 mA) * OFF voltage: 0 V to 1/2 Vs, or open (short circuit current: approx. 6.0 mA) * Light emission stops when connected to 0 V ON voltage: 0 to 3 V (short circuit current: approx. 6.0 mA) OFF voltage: 1/2 Vs to Vs, or open (short circuit current: approx. 5.0 mA) *
		OPERATING RANGE SELECT INPUT		Long: 12 V to Vs (short circuit current: approx. 4.2 mA) * or open Short: 0 to 3 V (short circuit current: approx. 4.2 mA)
		RESET/EDM		PNP ON voltage: Vs-3 V to Vs (short circuit current: approx. 9.5 mA) * OFF voltage: 0 V to 1/2 Vs, or open (short circuit current: approx. 13.0 mA) * NPN ON voltage: 0 to 3 V (short circuit current: approx. 13.0 mA) OFF voltage: 1/2 Vs to Vs, or open (short circuit current: approx. 9.5 mA) *
		MUTE A/B, RE-RESET, PSDI		PNP ON voltage: Vs-3 V to Vs (short circuit current: approx. 4.5 mA) * OFF voltage: 0 V to 1/2 Vs, or open (short circuit current: approx. 7.0 mA) * NPN ON voltage: 0 to 3 V (short circuit current: approx. 7.0 mA) OFF voltage: 1/2 Vs to Vs, or open (short circuit current: approx. 4.5 mA) *
		* The Vs indicates a supply voltage value in your environment.
	Overvoltage category (IEC 60664-1)			II
	Indicators			Refer to Catalog.
	Protective circuit			Output short-circuit protection
	Insulation resistance			20 M or higher (500 VDC megger)
	Dielectric strength			1,000 VAC, 50/60 Hz (1 min)
Func- tional	Mutual interference prevention			Optical synchronization by Scan Code: in up to 2 sets Wired synchronization: in up to 3 sets
	Cascade connection			Number of cascaded segments: 3 max. Total number of beams: 255 max.
	Test function			Self-test (at power-on, and during operation) External test (light emission stop function by test input)
	Safety-related functions			Interlock External Device Monitoring (EDM) Pre-Reset PSDI Fixed Blanking/Floating Blanking Reduced Resolution Muting/Override Mutual Interference Prevention PNP/NPN Selection Response Time Adjustment
Environ- mental	Ambient temperature	Operating		-30 to 55 °C (non-icing)
	Ambient temperature	Storage		-30 to 70 °C
	Ambient humidity	Operating		35% to 85% (non-condensing)
	Ambient humidity	Storage		35% to 95%
	Ambient illuminance			Incandescent lamp: 3,000 Ix max. on receiver surface Sunlight: 10,000 Ix max. on receiver surface
	Degree of protection (IEC 60529)			IEC 60529: IP65 and IP67, JIS C 0920 Annex 1: IP67G
	Vibration resistance (IEC 61496-1)			10 to 55 Hz, Multiple amplitude of 0.7 mm, 20 sweeps for all 3 axes
	Shock resistance (IEC 61496-1)			100 m/s², 1000 shocks for all 3 axes
	Pollution degree (IEC 60664-1)			3
Connec- tions	Root cable	Type of connection		To sensors: dedicated connector, To external: M12 connector type (5-pin emitter and 8-pin receiver) or open-ended type IP67 and IP67G (JIS C 0920 Annex 1) * rated when mated. * The F3SG-SR meets the degree of protection when the root cable is correctly connected with the F3SG-SR. The degree of protection is not satisfied with the part where cable wires are uncovered.
		Number of wires		Emitter: 5, Receiver: 8
		Cable length		Refer to Catalog
		Cable diameter		6 mm
		Minimum bending radius		R5 mm
	Cascading cable	Type of connection		To sensors: dedicated connector, To cascading sensors: M12 connector type (5-pin emitter and 8-pin receiver) or dedicated connector IP67 and IP67G (JIS C 0920 Annex 1) * rated when mated. * The F3SG-SR meets the degree of protection when the cascading cable is correctly connected with the F3SG-SR and the root cable. The degree of protection is not satisfied with the part where cable wires are uncovered.
		Number of wires		Emitter: 5, Receiver: 8
		Cable length		Refer to Catalog
		Cable diameter		6 mm
		Minimum bending radius		R5 mm
	Extension cable – Extended Socket- Straight Cable – Extended Plug-Socket Cable	Type of connection		M12 connector type (5-pin emitter and 8-pin receiver), IP67 * rated when mated * The extension cable meets the degree of protection when the root cable is correctly connected with the extension cable. The degree of protection is not satisfied with the part where cable wires are uncovered.
		Number of wires		Emitter: 5, Receiver: 8
		Cable length		Refer to Catalog
		Cable diameter		6.6 mm
		Minimum bending radius		R36 mm
	Cable extension	Refer to Catalog for restrictions on cable extension.
		Root cable		In optical synchronization: 100 m max. * between power supply and emitter and between power supply and receiver In wired synchronization: 100 m max. * between power supply and emitter, between power supply and receiver, and between emitter and receiver * When the Intelligent Tap (F39-SGIT-IL3) is connected to the sensor, this applies in the case of the rated power supply of 24 VDC to 24 VDC +20%.
		Cascade connection		Extension cable between sensors: 10 m max. (not including Cascading Cable for Extended 1 and Root Cable 2.) 1. F39-JGR3W 2. F39-JGR3K
Material				Housing: Aluminum alloy Cap: PBT resin Front window: Acrylic resin FE plate: Stainless steel
Weight				Refer to Catalog.
Included accessories				Instruction Sheet, Quick Installation Manual, Troubleshooting Guide Sticker, Warning Zone Label End Cap (for switching Scan Code Selection function)
Con- formity	Conforming standards			Refer to Catalog.
	Type of ESPE (IEC 61496-1)			Type 4
	Performance Level (PL)/ Safety category			PL e/Category 4 (EN ISO 13849-1:2015)
	PFH_D			1.1× 10^-8 max. (IEC 61508)
	Proof test interval T_M			Every 20 years (IEC 61508)
	SFF			99% (IEC 61508)
	HFT			1 (IEC 61508)
	Classification			Type B (IEC 61508-2)

F3SG-PG Main Unit

[][][][] in the model number indicates the protective height or product length in millimeters.

Model				Safety Multi-Light Beam
Model				F3SG- 4PGA[][][][] -[]A	F3SG- 4PGA[][][][]-[]L	F3SG- 4PGA[][][][]-[]C
Perfor- mance	Object resolution (Detection capability)			Opaque objects
	Object resolution (Detection capability)			30-mm dia. * It is the minimum diameter of an object that can be detected on the any optical axes, and the definition of the term is different from that for the F3SG-SR. The minimum diameter that can be detected in any position of the product length is “detection capability (30 mm) + beam gap”.
	Beam gap			F3SG-4PGA0670-2[]: 500 mm F3SG-4PGA0970-3[]: 400 mm F3SG-4PGA1070-4[]: 300 mm F3SG-4PGA1370-4[]: 400 mm		F3SG-4PGA0670-2C: 500 mm F3SG-4PGA1070-4C: 300 mm F3SG-4PGA1370-4C: 400 mm
	Number of beams			F3SG-4PGA0670-2[]: 2 F3SG-4PGA0970-3[]: 3 F3SG-4PGA1070-4[]: 4 F3SG-4PGA1370-4[]: 4		F3SG-4PGA0670-2C: 2 F3SG-4PGA1070-4C: 4 F3SG-4PGA1370-4C: 4
	Lens size			8.1 × 12.8 mm (W × H)
	Protective height			—
	Product length			670 mm/970 mm/1070 mm/1370 mm
	Operating range	Long		0.5 to 20.0 m (Typ. 30.0 m)	20.0 to 70.0 m (Typ. 110.0 m)	0.5 to 5.0 m (Typ. 8.0 m)
	Operating range	Short		—	0.5 to 20.0 m (Typ. 30.0 m)	—
	Response time *1	Normal mode	ON to OFF	Optical synchronization: 8 ms Wired synchronization: 10 ms
		Normal mode	OFF to ON	Optical synchronization: 40 ms Wired synchronization: 50 ms
		×2 Slow mode *2	ON to OFF	Optical synchronization: 16 ms Wired synchronization: 20 ms
		×2 Slow mode *2	OFF to ON	Optical synchronization: 80 ms Wired synchronization: 100 ms
		×4 Slow mode *2	ON to OFF	Optical synchronization: 32 ms Wired synchronization: 40 ms
		×4 Slow mode *2	OFF to ON	Optical synchronization: 160 ms Wired synchronization: 200 ms
		×8 Slow mode *2	ON to OFF	Optical synchronization: 64 ms Wired synchronization: 80 ms
		×8 Slow mode *2	OFF to ON	Optical synchronization: 320 ms Wired synchronization: 400 ms
		1. Response time when used in one segment system. Refer to Catalog. Refer to the User’s Manual (Man. No. Z405) for cascaded connection. 2. Selectable by SD Manager 3.
	Effective aperture angle (EAA) (IEC 61496-2)			±2.5° max. * Emitter, receiver, and Emitter/receiver at operating range of 3 m or greater. Passive mirror not applicable
	Light source			Infrared LEDs, Wavelength: 870 nm
	Startup waiting time			3 s max.
Elec- trical	Power supply voltage (Vs)			SELV/PELV 24 VDC ±20% (ripple p-p 10% max.)
	Current consumption			Refer to Catalog.
	Safety outputs (OSSD)			Two PNP or NPN transistor outputs (PNP or NPN is selectable by wiring of power supply.) Load current: 300 mA max., Residual voltage: 2 V max. (except for voltage drop due to cable extension), Capacitive load: 1 μF max., Inductive load: 2.2 H max. Leakage current: 1 mA max. (PNP), 2 mA max. (NPN) 1. The load current is 150 mA max. when the operating ambient temperature is between 45°C and 55°C. 2. The residual voltage is 3 V max. when the Intelligent Tap is connected to the sensor. 3. The load inductance is the maximum value when the safety output frequently repeats ON and OFF. When you use the safety output at 4 Hz or less, the usable load inductance becomes larger. 4. These values must be taken into consideration when connecting elements including a capacitive load such as a capacitor.
	Auxiliary output			Two PNP or NPN transistor 1 outputs (PNP or NPN is selectable by wiring of power supply.) Load current: 100 mA max., Residual voltage: 2 V max. * * The residual voltage is 3 V max. when the Intelligent Tap is connected to the sensor.
	Output operation mode	Safety output		Light-ON (Safety outputs are turned to the ON state when the receiver receives an emitting signal.)
	Output operation mode	Auxiliary output		Safety output (Inverted signal output: Enable) (default) (Configurable by SD Manager 3)
	Input voltage	TEST		Light emission stops when connected to 24 VDC ON voltage: Vs-3 V to Vs (short circuit current: approx. 5.0 mA) * OFF voltage: 0 V to 1/2 Vs, or open (short circuit current: approx. 6.0mA) Light emission stops when connected to 0 V ON voltage: 0 to 3 V (short circuit current: approx. 6.0 mA) OFF voltage: 1/2 Vs to Vs, or open (short circuit current: approx. 5. 0mA) *		—
		OPERATING RANGE SELECT INPUT		—	Long: 12V to Vs (short circuit current: approx. 4.2 mA) * or open Short: 0 to 3V (short circuit current: approx. 4.2 mA)	—
		RESET/EDM		PNP ON voltage: Vs-3 V to Vs (short circuit current: approx. 9.5 mA) * OFF voltage: 0 V to 1/2 Vs, or open (short circuit current: approx. 13.0 mA) * NPN ON voltage: 0 to 3 V (short circuit current: approx. 13.0 mA) OFF voltage: 1/2 Vs to Vs, or open (short circuit current: approx. 9.5 mA) *
		MUTE A/B, RE-RESET, PSDI		PNP ON voltage: Vs-3 V to Vs (short circuit current: approx. 4.5 mA) * OFF voltage: 0 V to 1/2 Vs, or open (short circuit current: approx. 7.0 mA) * NPN ON voltage: 0 to 3 V (short circuit current: approx. 7.0mA) OFF voltage: 1/2 Vs to Vs, or open (short circuit current: approx. 4.5 mA) *
		* The Vs indicates a supply voltage value in your environment.
	Overvoltage category (IEC 60664-1)			II
	Indicators			Refer to Catalog.
	Protective circuit			Output short-circuit protection
	Insulation resistance			20 M or higher (500 VDC megger)
	Dielectric strength			1,000 VAC, 50/60 Hz (1 min)
Func- tional	Mutual interference prevention			Optical synchronization by Scan Code: in up to 2 sets Wired synchronization: in up to 3 sets
	Cascade connection			—
	Test function			Self-test (at power-on, and during operation) External test (light emission stop function by test input)		Self-test (at power-on, and during operation)
	Safety-related functions			Interlock External Device Monitoring (EDM) Pre-Reset Muting/Override Mutual Interference Prevention PNP/NPN Selection Response Time Adjustment
Environ- mental	Ambient temperature	Operating		-30 to 55 °C (non-icing)
	Ambient temperature	Storage		-30 to 70 °C
	Ambient humidity	Operating		35% to 85% (non-condensing)
	Ambient humidity	Storage		35% to 95%
	Ambient illuminance			Incandescent lamp: 3,000 Ix max. on receiver surface Sunlight: 10,000 Ix max. on receiver surface
	Degree of protection (IEC 60529)			IEC 60529: IP65 and IP67
	Vibration resistance (IEC 61496-1)			10 to 55 Hz, Multiple amplitude of 0.7 mm, 20 sweeps for all 3 axes
	Shock resistance (IEC 61496-1)			100 m/s², 1000 shocks for all 3 axes
	Pollution degree (IEC 60664-1)			3
Connec- tions	Root cable	Type of connection		To sensors: dedicated connector, To external: M12 connector type (5-pin emitter and 8-pin receiver) or open-ended type IP67 and IP67G (JIS C 0920 Annex 1) * rated when mated. * The F3SG-SR meets the degree of protection when the root cable is correctly connected with the F3SG-SR. The degree of protection is not satisfied with the part where cable wires are uncovered.
		Number of wires		Emitter: 5, Receiver: 8, Emitter/receiver: 8
		Cable length		Refer to Catalog
		Cable diameter		6 mm
		Minimum bending radius		R5 mm
	Cascading cable	Type of connection		—
		Number of wires		—
		Cable length		—
		Cable diameter		—
		Minimum bending radius		—
	Extension cable – Extended Socket- Straight Cable – Extended Plug-Socket Cable	Type of connection		M12 connector type (5-pin emitter and 8-pin receiver), IP67 * rated when mated * The extension cable meets the degree of protection when the root cable is correctly connected with the extension cable. The degree of protection is not satisfied with the part where cable wires are ncovered.
		Number of wires		Emitter: 5, Receiver: 8, Emitter/receiver: 8
		Cable length		Refer to Catalog
		Cable diameter		6.6 mm
		Minimum bending radius		R36 mm
	Cable extension	Refer to Catalog for restrictions on cable extension.
		Root cable		In optical synchronization: 100 m max. * between power supply and emitter and between power supply and receiver In wired synchronization: 100 m max. * between power supply and emitter, between power supply and receiver, and between emitter and receiver * When the Intelligent Tap (F39-SGIT-IL3) is connected to the sensor, this applies in the case of the rated power supply of 24 VDC to 24 VDC +20%.
		Cascade connection		—
Material				Housing: Aluminum alloy Cap: PBT resin Front window: Acrylic resin FE plate: Stainless steel
Weight				Refer to Catalog.
Included accessories				Instruction Sheet, Quick Installation Manual, Troubleshooting Guide Sticker, End Cap (for switching Scan Code Selection function)
Con- formity	Conforming standards			Refer to Catalog.
	Type of ESPE (IEC 61496-1)			Type 4
	Performance Level (PL)/ Safety category			PL e/Category 4 (EN ISO 13849-1:2015)
	PFH_D			1.1× 10^-8 max. (IEC 61508)
	Proof test interval T_M			Every 20 years (IEC 61508)
	SFF			99% (IEC 61508)
	HFT			1 (IEC 61508)
	Classification			Type B (IEC 61508-2)

Restrictions on cable extension

For the cable extension of the F3SG-SR/PG, refer to the following diagrams. For the cable extension of the F3SG-SR/PG with the Intelligent Tap, refer to User’s Manual (Man. No. Z405).

F3SG-SR / PG Series Specifications 6

Intelligent Tap F39-SGIT-IL3

Model			F39-SGIT-IL3
Applicable sensor			F3SG-SR/PG
Perfor- mance	Response time		Output ON to OFF and OFF to ON: 44 ms max. each * * The response time is the time interval between the changes of the states of the sensor OSSD’s and the DO (pin 2).
Perfor- mance	Startup waiting time		3 s max.
Electrical	Power supply voltage (Vs)		Supplied from external power source: SELV/PELV 24 VDC±20% (ripple p-p 10% max.) USB bus powered: 5 VDC
	Current consumption		85 mA max. (When connecting 24 VDC power supply and IO-Link Master)
	Safety outputs (OSSD)/ Auxiliary output		Refer to the ratings and specifications of the F3SG-SR/PG. The safety outputs and auxiliary output of the Intelligent Tap are directly connected to those of the F3SG-SR/PG.
	Digital output for pin 2 (IO-Link) *		One PNP transistor output Load current: 100 mA max., Residual voltage: 2 V max., Leakage current: 1 mA max. The DO is in the OFF state when the safety outputs are in the ON state. The DO is in the ON state when the safety outputs are in the OFF state. (Regardless of the PNP/NPN setting of the F3SG-SR)
	* For the DO (pin 2) of CN3
	Input voltage	RESET, EDM	PNP ON voltage: Vs-3 V to Vs (short circuit current: approx. 9.5 mA) 2 OFF voltage: 0 V to 1/2 Vs, or open (short circuit current: approx. 13.0 mA) 2 NPN ON voltage: 0 to 3 V (short circuit current: approx. 13.0 mA) OFF voltage: 1/2 Vs to Vs, or open (short circuit current: approx. 9.5 mA) *2
		MUTE A/B, PRE-RESET, PSDI *1	PNP ON voltage: Vs-3 V to Vs (short circuit current: approx. 4.5 mA) 2 OFF voltage: 0 V to 1/2 Vs, or open (short circuit current: approx. 7.0 mA) 2 NPN ON voltage: 0 to 3 V (short circuit current: approx. 7.0 mA) OFF voltage: 1/2 Vs to Vs, or open (short circuit current: approx. 4.5 mA) *2
		1. PSDI is only available for F3SG-SR. 2. The Vs indicates a supply voltage value in your environment.
	Overvoltage category (IEC 60664-1)		II
	Protective circuit		Output short-circuit protection, Output reverse polarity protection
	Insulation resistance		20 MΩ or higher (500 VDC megger)
	Dielectric strength		1,000 VAC, 50/60 Hz (1 min)
Functional	Maintenance Information		Error Log Power-ON Time
Environ- mental	Ambient temperature	Operating	-30 to 55 °C (non-icing)
	Ambient temperature	Storage	-30 to 70 °C
	Ambient humidity	Operating	35% to 85% (non-condensing)
	Ambient humidity	Storage	35% to 85%
	Degree of protection (IEC 60529)		IP65, IP67 and IP67G (Covers and cables connected with the Intelligent Tap.)
	Vibration resistance (IEC 61496-1)		10 to 55 Hz, Multiple amplitude of 0.7 mm, 20 sweeps for all 3 axes
	Shock resistance (IEC 61496-1)		100 m/s², 1000 shocks for all 3 axes
	Pollution degree (IEC 60664-1)		3
Connec- tions	To sensors, control box and IO-Link		M12 connectors: 8-pin (CN1: receiver and CN2: control box) and 5-pin (CN3: IO-Link and CN4: emitter), IP67 and IP67G (JIS C 0920 Annex 1) * rated when mated. * The F3SG-SR meets the degree of protection when the root cable of the F3SG-SR is correctly connected with the F3SG-SR.
	Connection		USB Type-C
	Cable extension		20 m max. between IO-Link Master and Intelligent Tap, 4 m max.* between PC and Intelligent Tap via USB cable * It is not guaranteed that the Intelligent Tap is connectable to any PC or USB cable. Verify the connection with the USB cable you use.
IO-Link commu- nications	IO-Link version		Version 1.1
	Baud rate		COM3: 230.4 kbps
	Data length		PD: 4 bytes, OD: 32 bytes (M-sequence type: TYPE_2_V)
	Minimum cycle time		22 ms
Material			PBT resin
Weight			F39-SGIT-IL3: 180 g (when packaged), F39-LITF1: 50 g (when packaged)
Included accessories			Instruction Sheet and M12 Connector Cover (2 pcs)

Bluetooth® Communication Unit F39-SGBT

Model	F39-SGBT
Applicable sensor	F3SG-SR/PG
Power supply voltage (Vs)	24 VDC±20%, ripple p-p 10% max. (shares power supply of Intelligent Tap)
Current consumption	30 mA max. (shares power supply of Intelligent Tap)
Ambient temperature	Operating: -30 to 55 °C (non-icing) Storage: -30 to 70 °C
Ambient humidity	Operating: 35% to 85% (non-condensing) Storage: 35% to 85%
Degree of protection	IP65, IP67 and IP67G (rated when connected to Intelligent Tap)
Vibration resistance	10 to 55 Hz, Multiple amplitude of 0.7 mm, 20 sweeps for all 3 axes
Shock resistance	100m/s², 1000 shocks for all 3 axes
Type of connection	To be connected to Intelligent Tap
Communication system	Bluetooth® Version 3.0
Communication profile	SPP (Serial Port Profile)
Transmission distance	Approx. 10 m max. (Output power: Class 2) *
Material	PBT resin
Weight	70 g (when packaged)

* It depends on use environment conditions.

Safety Light Curtain IP69K Model

Main Unit F3SG-SR-K

[][][][] in the model number indicates the protective height in millimeters.

Model				F3SG-4SRB[][][][]-14-K	F3SG-4SRB[][][][]-25-K
Perfor- mance	Object resolution (Detection capability)			Opaque objects
	Object resolution (Detection capability)			14-mm dia.	25-mm dia.
	Beam gap			10 mm	20 mm
	Number of beams			31 to 179	16 to 92
	Lens size			4.4 × 3.4 mm (W × H)	6.7 × 4.5 mm (W × H)
	Protective height			320 to 1,800 mm	320 to 1,840 mm
	Operating range	Long		0.3 to 8.0 m (Typ. 12.0 m)	0.3 to 16.0 m (Typ. 24.0 m)
		Short		0.3 to 2.4 m (Typ. 3.6 m)	0.3 to 5.6 m (Typ. 8.4 m)
		* When operating at an ambient temperature of -10 to -30 °C, use the F3SG-SR with the operating range of 0.3 to 4.0 m in Long Mode and 0.3 to 1.2 m in Short Mode.
	Response time	Normal mode	ON to OFF	Optical synchronization: 8 to 18 ms Wired synchronization: 10 to 21 ms	Optical synchronization: 8 to 13 ms Wired synchronization: 10 to 17 ms
		Normal mode	OFF to ON	Optical synchronization: 40 to 90 ms Wired synchronization: 50 to 105 ms	Optical synchronization: 40 to 90 ms Wired synchronization: 50 to 85 ms
		×2 Slow mode *	ON to OFF	Optical synchronization: 16 to 36 ms Wired synchronization: 20 to 42 ms	Optical synchronization: 16 to 26 ms Wired synchronization: 20 to 34 ms
		×2 Slow mode *	OFF to ON	Optical synchronization: 80 to 180 ms Wired synchronization: 100 to 210 ms	Optical synchronization: 80 to 130 ms Wired synchronization: 100 to 170 ms
		×4 Slow mode *	ON to OFF	Optical synchronization: 32 to 72 ms Wired synchronization: 40 to 84 ms	Optical synchronization: 32 to 52 ms Wired synchronization: 40 to 68 ms
		×4 Slow mode *	OFF to ON	Optical synchronization: 160 to 360 ms Wired synchronization: 200 to 420 ms	Optical synchronization: 160 to 260 ms Wired synchronization: 200 to 340 ms
		×8 Slow mode *	ON to OFF	Optical synchronization: 64 to 144 ms Wired synchronization: 80 to 168 ms	Optical synchronization: 64 to 104 ms Wired synchronization: 80 to 136 ms
		×8 Slow mode *	OFF to ON	Optical synchronization: 320 to 720 ms Wired synchronization: 400 to 840 ms	Optical synchronization: 320 to 520 ms Wired synchronization: 400 to 680 ms
		* Selectable by SD Manager 3.
	Effective aperture angle (EAA) (IEC 61496-2)			±2.5° max. * Emitter and receiver at operating range of 3 m or greater.
	Light source			Infrared LEDs, Wavelength: 870 nm
	Startup waiting time			3 s max.
Elec- trical	Power supply voltage (Vs)			SELV/PELV 24 VDC ±20% (ripple p-p 10% max.)
	Current consumption			Refer to Catalog.
	Safety outputs (OSSD)			Two PNP or NPN transistor outputs (PNP or NPN is selectable by wiring of power supply.) Load current: 300 mA max., Residual voltage: 2 V max. (except for voltage drop due to cable extension), Capacitive load: 1 μF max., Inductive load: 2.2 H max. 12 Leakage current: 1 mA max. (PNP), 2 mA max. (NPN) 3 1. The residual voltage is 3 V max. when the Intelligent Tap is connected to the sensor. 2. The load inductance is the maximum value when the safety output frequently repeats ON and OFF. When you use the safety output at 4 Hz or less, the usable load inductance becomes larger. 3. These values must be taken into consideration when connecting elements including a capacitive load such as a capacitor.
	Auxiliary output			Two PNP or NPN transistor 1 outputs (PNP or NPN is selectable by wiring of power supply.) Load current: 100 mA max., Residual voltage: 2 V max. * * The residual voltage is 3 V max. when the Intelligent Tap is connected to the sensor.
	Output operation mode	Safety output		Light-ON (Safety outputs are turned to the ON state when the receiver receives an emitting signal.)
	Output operation mode	Auxiliary output		Safety output (Inverted signal output: Enable) (default) (Configurable by SD Manager 3)
	Input voltage	TEST		Light emission stops when connected to 24 VDC ON voltage: Vs-3 V to Vs (short circuit current: approx. 5.0 mA) * OFF voltage: 0 V to 1/2 Vs, or open (short circuit current: approx. 6.0 mA) * Light emission stops when connected to 0 VDC ON voltage: 0 to 3 V (short circuit current: approx. 6.0 mA) OFF voltage: 1/2 Vs to Vs, or open (short circuit current: approx. 5.0 mA) *
		OPERATING RANGE SELECT INPUT		Long: 12 V to Vs (short circuit current: approx. 4.2 mA) * or open Short: 0 to 3 V (short circuit current: approx. 4.2 mA)
		RESET/EDM		PNP ON voltage: Vs-3 V to Vs (short circuit current: approx. 9.5 mA) * OFF voltage: 0 V to 1/2 Vs, or open (short circuit current: approx. 13.0 mA) * NPN ON voltage: 0 to 3 V (short circuit current: approx. 13.0 mA) OFF voltage: 1/2 Vs to Vs, or open (short circuit current: approx. 9.5 mA) *
		MUTE A/B, RE-RESET, PSDI		PNP ON voltage: Vs-3V to Vs (short circuit current: approx. 4.5 mA) * OFF voltage: 0 V to 1/2 Vs, or open (short circuit current: approx. 7.0 mA) * NPN ON voltage: 0 to 3 V (short circuit current: approx. 7.0 mA) OFF voltage: 1/2 Vs to Vs, or open (short circuit current: approx. 4.5 mA) *
		* The Vs indicates a supply voltage value in your environment.
	Overvoltage category (IEC 60664-1)			II
	Indicators			Refer to Catalog.
	Protective circuit			Output short-circuit protection
	Insulation resistance			20 M or higher (500 VDC megger)
	Dielectric strength			1,000 VAC, 50/60 Hz (1 min)
Func- tional	Mutual interference prevention			Optical synchronization: The scan code is fixed to Code A. Wired synchronization: in up to 3 sets
	Test function			Self-test (at power-on, and during operation) External test (light emission stop function by test input)
	Safety-related functions			Interlock External Device Monitoring (EDM) Pre-Reset PSDI Fixed Blanking/Floating Blanking Reduced Resolution Muting/Override Mutual Interference Prevention PNP/NPN Selection Response Time Adjustment
Environ- mental	Ambient temperature	Operating		-30 to 55 °C (non-icing)
	Ambient temperature	Storage		-30 to 70 °C
	Ambient humidity	Operating		35% to 85% (non-condensing)
	Ambient humidity	Storage		35% to 95%
	Ambient illuminance			Incandescent lamp: 3,000 Ix max. on receiver surface Sunlight: 10,000 Ix max. on receiver surface
	Degree of protection (IEC 60529)			IEC 60529: IP65 and IP67, ISO 20653: IP69K
	Vibration resistance (IEC 61496-1)			10 to 55 Hz, Multiple amplitude of 0.7 mm, 20 sweeps for all 3 axes
	Shock resistance (IEC 61496-1)			100 m/s², 1000 shocks for all 3 axes
	Pollution degree (IEC 60664-1)			3
Connec- tions	Root cable	Type of connection		Open-ended type
		Number of wires		Emitter: 5, Receiver: 8
		Cable length		15 m
		Cable diameter		6 mm
		Minimum bending radius		R5 mm
	Cable extension	Refer to Catalog for restrictions on cable extension.
	Cable extension	Root cable		In optical synchronization: 100 m max. * between power supply and emitter and between power supply and receiver In wired synchronization: 100 m max. * between power supply and emitter, between power supply and receiver, and between emitter and receiver * When the Intelligent Tap (F39-SGIT-IL3) is connected to the sensor, this applies in the case of the rated power supply of 24 VDC to 24 VDC +20%.
Material				Pipe: Acrylic resin Cap: SUS316L
Weight				Refer to Catalog.
Included accessories				Instruction Sheet, Quick Installation Manual, Troubleshooting Guide Sticker
Con- formity	Conforming standards			Refer to Catalog.
	Type of ESPE (IEC 61496-1)			Type 4
	Performance Level (PL)/ Safety category			PL e/Category 4 (EN ISO 13849-1:2015)
	PFH_D			1.1× 10^-8 max. (IEC 61508)
	Proof test interval T_M			Every 20 years (IEC 61508)
	SFF			99% (IEC 61508)
	HFT			1 (IEC 61508)
	Classification			Type B (IEC 61508-2)

Dimensions | Safety Light Curtain – F3SG-SR / PG series

(Unit: mm)

F3SG-SR

Main Unit

Mounted with Side-Mount Brackets (Intermediate Brackets) (F39-LSGF)

Backside Mounting

F3SG-SR / PG Series Dimensions 3

Mounted with Side-Mount Brackets (Intermediate Brackets) (F39-LSGF)

Side Mounting

F3SG-SR / PG Series Dimensions 4

Mounted with Adjustable Side-Mount Brackets (Intermediate Brackets) (F39-LSGA)

Backside Mounting

F3SG-SR / PG Series Dimensions 5

Mounted with Adjustable Side-Mount Brackets (Intermediate Brackets) (F39-LSGA)

Side Mounting

F3SG-SR / PG Series Dimensions 6

Mounted with Adjustable Top/Bottom Brackets (F3SJ, F3SN Adapter) (F39-LSGTB-SJ) and Side-Mount Brackets (Intermediate Brackets) (F39-LSGF)

Backside Mounting

F3SG-SR / PG Series Dimensions 7

Mounted with Adjustable Top/Bottom Brackets (F3SJ, F3SN Adapter) (F39-LSGTB-SJ) and Side-Mount Brackets (Intermediate Brackets) (F39-LSGF)

Side Mounting

F3SG-SR / PG Series Dimensions 8

Mounted with Adjustable Top/Bottom Brackets (F3SJ, F3SN Adapter) (F39-LSGTB-SJ) and Adjustable Side-Mount Brackets (Intermediate Brackets) (F39-LSGA)

Backside Mounting

F3SG-SR / PG Series Dimensions 9

Mounted with Adjustable Top/Bottom Brackets (F3SJ, F3SN Adapter) (F39-LSGTB-SJ) and Adjustable Side-Mount Brackets (Intermediate Brackets) (F39-LSGA)

Side Mounting

F3SG-SR / PG Series Dimensions 10

F3SG-PG

Main Unit

Mounted with Side-Mount Brackets (Intermediate Brackets) (F39-LSGF)

Backside Mounting

F3SG-SR / PG Series Dimensions 13

Mounted with Side-Mount Brackets (Intermediate Brackets) (F39-LSGF)

Side Mounting

F3SG-SR / PG Series Dimensions 14

Mounted with Adjustable Side-Mount Brackets (Intermediate Brackets) (F39-LSGA)

Backside Mounting

F3SG-SR / PG Series Dimensions 15

Mounted with Adjustable Side-Mount Brackets (Intermediate Brackets) (F39-LSGA)

Side Mounting

F3SG-SR / PG Series Dimensions 16

Mounted with Adjustable Top/Bottom Brackets (F3SJ, F3SN Adapter) (F39-LSGTB-SJ) and Side-Mount Brackets (Intermediate Brackets) (F39-LSGF)

Backside Mounting

F3SG-SR / PG Series Dimensions 17

Mounted with Adjustable Top/Bottom Brackets (F3SJ, F3SN Adapter) (F39-LSGTB-SJ) and Side-Mount Brackets (Intermediate Brackets) (F39-LSGF)

Side Mounting

F3SG-SR / PG Series Dimensions 18

Mounted with Adjustable Top/Bottom Brackets (F3SJ, F3SN Adapter) (F39-LSGTB-SJ) and Adjustable Side-Mount Brackets (Intermediate Brackets) (F39-LSGA)

Backside Mounting

F3SG-SR / PG Series Dimensions 19

Mounted with Adjustable Top/Bottom Brackets (F3SJ, F3SN Adapter) (F39-LSGTB-SJ) and Adjustable Side-Mount Brackets (Intermediate Brackets) (F39-LSGA)

Side Mounting

F3SG-SR / PG Series Dimensions 20

F3SG-SR/PG Accessories

Bracket

Side-Mount Bracket (Intermediate Bracket) (F39-LSGF, sold separately)

F3SG-SR / PG Series Dimensions 23

Adjustable Side-Mount Bracket (Intermediate Bracket) (F39-LSGA, sold separately)

F3SG-SR / PG Series Dimensions 24

Adjustable Top/Bottom Bracket (F3SJ, F3SN Adapter) (F39-LSGTB-SJ, sold separately)

F3SG-SR / PG Series Dimensions 25

Adjustable Top/Bottom Bracket (F3SG-RA/RE Adapter) (F39-LSGTB-RE, sold separately)

F3SG-SR / PG Series Dimensions 26

Adjustable Top/Bottom Bracket (MS4800, F3SR Adapter) (F39-LSGTB-MS, sold separately)

F3SG-SR / PG Series Dimensions 27

Intelligent Tap

Intelligent Tap (F39-SGIT-IL3, sold separately)

F3SG-SR / PG Series Dimensions 29

Intelligent Tap Bracket (F39- LITF1, sold separately)

F3SG-SR / PG Series Dimensions 30

Assembly Dimensions (Intelligent Tap/ Intelligent Tap Bracket)

F3SG-SR / PG Series Dimensions 31

Bluetooth® Communication Unit (F39-SGBT, sold separately)

F3SG-SR / PG Series Dimensions 32

Assembly Dimensions (Intelligent Tap/Bluetooth® Communication Unit/Intelligent Tap Bracket)

F3SG-SR / PG Series Dimensions 33

Spatter Protection Cover

Spatter Protection Cover (F39-HSG[][][][], sold separately)

F3SG-SR / PG Series Dimensions 35

Connecting Cables

Root-Straight Cable

Root-Straight Cable for Emitter (F39-JG[]C-L, sold separately)

F3SG-SR / PG Series Dimensions 38

Root-Straight Cable for receiver or emitter/receiver of F3SG-PG Perimeter Guarding Passive Mirror (F39-JG[]C-D, sold separately)

F3SG-SR / PG Series Dimensions 39

Root-Plug Cable for Extended

Root-Plug Cable for Extended for Emitter (F39-JGR[]K-L, sold separately)

F3SG-SR / PG Series Dimensions 41

Root-Plug Cable for Extended for receiver or emitter/receiver of F3SG-PG Perimeter Guarding Passive Mirror (F39-JGR[]K-D, sold separately)

F3SG-SR / PG Series Dimensions 42

Extended Socket-Straight Cable

Extended Socket-Straight Cable for Emitter (F39-JG[]A-L, sold separately)

F3SG-SR / PG Series Dimensions 44

Extended Socket-Straight Cable for receiver or emitter/receiver of F3SG-PG Perimeter Guarding Passive Mirror (F39-JG[]A-D, sold separately)

F3SG-SR / PG Series Dimensions 45

Extended Plug-Socket Cable

Extended Plug-Socket Cable for Emitter: Cable for extension (F39-JG[]B-L, sold separately)

F3SG-SR / PG Series Dimensions 47

Extended Plug-Socket Cable for receiver or emitter/receiver of F3SG-PG Perimeter Guarding Passive Mirror: Cable for extension (F39-JG[]B-D, sold separately)

F3SG-SR / PG Series Dimensions 48

Cascading Cable for Extended (F39-JGR3W, sold separately) (two cables per set, one for emitter and one for receiver)

Emitter Cascading Cable for Extended

F3SG-SR / PG Series Dimensions 50

Receiver Cascading Cable for Extended

F3SG-SR / PG Series Dimensions 51

Side-by-side Cascading Cable (F39-JGR12L, sold separately) (two cables per set, one for emitter and one for receiver)

Side-by-side Cascading Cable for Emitter

F3SG-SR / PG Series Dimensions 53

Side-by-side Cascading Cable for Receiver

F3SG-SR / PG Series Dimensions 54

Conversion Cable

F3SJ-B/A Conversion Cable for Emitter (F39-JGR3K-SJ-L, sold separately)

F3SG-SR / PG Series Dimensions 56

F3SJ-B/A Conversion Cable for Receiver (F39-JGR3K-SJ-D, sold separately)

F3SG-SR / PG Series Dimensions 57

F3SG-RE Conversion Cable for Emitter (F39-JGR3K-RE-L, sold separately)

F3SG-SR / PG Series Dimensions 58

F3SG-RE Conversion Cable for Receiver (F39-JGR3K-RE-D, sold separately)

F3SG-SR / PG Series Dimensions 59

MS48 Conversion Cable for Emitter (F39-JGR3K-MS-L, sold separately)

F3SG-SR / PG Series Dimensions 60

MS48 Conversion Cable for Receiver (F39-JGR3K-MS-D, sold separately)

F3SG-SR / PG Series Dimensions 61

Y-Joint Plug/Socket Connector (F39-GCNY2, sold separately)

F3SG-SR / PG Series Dimensions 62

Reset Switch Connector (F39-GCNY3, sold separately)

F3SG-SR / PG Series Dimensions 63

Connector Connected to Cable, Socket on One Cable End (XS5F-D421-[]80-F, sold separately)

F3SG-SR / PG Series Dimensions 64

Lamp

Lamp (F39-SGLP, sold separately)

F3SG-SR / PG Series Dimensions 66

Muting Sensor Arm Mounter

Muting Sensor Arm Mounter (F39-FMA[][][][], sold separately)

F3SG-SR / PG Series Dimensions 68

Muting Sensor Arm Mounter Bracket for SLC (F39-LMAF1, sold separately)

F3SG-SR / PG Series Dimensions 69

• Assembly Dimensions

Mounting F39-FMA[][][][]-T on the Muting Sensor Arm Mounter Bracket for SLC (F39-LMAF1)

F3SG-SR / PG Series Dimensions 71

Mounting F39-FMA[][][][]-R on the Floor Mount Column (F39-ST[][][][])

F3SG-SR / PG Series Dimensions 72

Mount-Column Adjustable Base

F39-STB

F3SG-SR / PG Series Dimensions 73

Floor Mount Column

F39-ST[][][][]

F3SG-SR / PG Series Dimensions 74

• Assembly Dimensions (Mount-Column Adjustable Base /Floor Mount Column)

F39-STB/F39-ST[][][][]

F3SG-SR / PG Series Dimensions 76

Mirror Column

F39-SML[][][][]

F3SG-SR / PG Series Dimensions 77

• Assembly Dimensions (Mount-Column Adjustable Base /Mirror Column)

F39-STB/F39-SML[][][][]

F3SG-SR / PG Series Dimensions 79

F39-PML[][][][]

F3SG-SR / PG Series Dimensions 80

• Assembly Dimensions (Mount-Column Adjustable Base /Mirror Column)

F39-STB/F39-PML[][][][]

F3SG-SR / PG Series Dimensions 82

Muting Sensor Connection Box

F39-GCN5

F3SG-SR / PG Series Dimensions 83

F3SG-SR-K

Main Unit

Mounted with IP69K Model Mounting Brackets (F39-LSGTB-K)

Side mounting and backside mounting

F3SG-SR / PG Series Dimensions 86

Accessories

Bracket

IP69K Model Mounting Bracket (F39-LSGTB-K, sold separately)

F3SG-SR / PG Series Dimensions 88

Features | Safety Light Curtain – F3SG-SR / PG series

Conforms to major international standards

Area Beam Indicators (ABI) – Tri-color indicators for easy & instant status
Harsh Environments – Cold storage, metal working (oil mist), food processing
Back-up & restore settings with Intelligent Tap – can reduce maintenance setup time by 90%
Perfect fit – Protective heights in 40 mm increments
IO-Link – Easy remote monitoring of process & service data
A broad line-up, from finger protection to body protection

Properties | Safety Light Curtain – F3SG-SR / PG series

Safety Light Curtain	F3SG-SR	F3SG-PG
Object Resolution	Ø 14 / 25 / 45 / 85 mm	30 mm
Beam gap	10 / 20 / 40 / 80 mm	300 – 500 mm
Number of beams	15-199 / 8-124 / 6-38 / 4-12	2-4
Dimensions	160-2000 / 160-2480 / 240-1520 / 280-920 mm	670 / 970 / 1070 / 1370 mm
Height (W x H) mm	4.4 x 3.4 / 6.7 x 4.5	8.1 x 12.8
Enclosure Rating IP	65 / 67 / 67G	65 / 67
Rangevoltage	24 VDC
Safety Output	2 Port(PNPorNPN) , 24 VDC Current300 mA
เอาต์พุตเสริม	1 Port(PNPorNPN), 24 VDCCurrent 100 mA

ติดต่อแผนก Automation & Robots