OMRON Safety Light Curtain – F3SG-R series

ม่านแสงนิรภัย มีทั้งความทนทาน และความน่าเชื่อถือ

F3SG-RA
- ติดตั้งรวดเร็ว และมีความทนทานต่อการเปลี่ยนแปลงทางสภาพแวดล้อมสูง
- ขายึดปรับแนวเพื่อปรับลำแสงให้ง่ายขึ้น ลดเวลาในการติดตั้งลง 50%
- ลดความจำเป็นในการเดินสายสำหรับซิงโครไนซ์ระหว่างตัวรับและตัวส่ง แบบออปติคัล
- ประหยัดพื้นที่ในการติดตั้ง และเดินสายไฟง่าย (1 เส้น) ช่วยลดความเสี่ยงในการขาดความเชื่อมต่อ
- QR Code เพื่อแก้ปัญหาออนไลน์
- ออกแบบเพื่อใช้งานทั่วโลก การเลือกเอาต์พุตแบบ PNP/NPN โดย DIP Switch
- เวลาตอบสนองที่รวดเร็ว 8 ms
- รุ่น Advance รองรับวิธีการด้านความปลอดภัยที่ซับซ้อน
F3SG-RE
- ลดสายไฟลง และการตอบสนองที่รวดเร็ว
- Easy version สำหรับค่าใช้จ่าย และประสิทธิภาพ
- เวลาตอบสนองที่รวดเร็ว 5 ms
- QR Code เพื่อแก้ปัญหาออนไลน์
- สำหรับอุปกรณ์ stand-alone
F3SG-RR
- ออกแบบให้แข็งแรงเพื่อความน่าเชื่อถือ และใช้งานในสภาพแวดล้อมที่มีน้ำมัน (IP 67G)
- ทนทานต่อน้ำมัน
- QR Code เพื่อแก้ปัญหาออนไลน์

Category: Light Curtains

Description

OMRON Safety Light Curtain – F3SG-R series

Model Numbers | Safety Light Curtain – F3SG-R series

F3SG-RA Advanced type

Main Units

Safety Light Curtain

Finger protection

Number of beams	Protective height (mm)	Model
1	160	F3SG-4RA0160-14
23	240	F3SG-4RA0240-14
31	320	F3SG-4RA0320-14
39	400	F3SG-4RA0400-14
47	480	F3SG-4RA0480-14
55	560	F3SG-4RA0560-14
63	640	F3SG-4RA0640-14
71	720	F3SG-4RA0720-14
79	800	F3SG-4RA0800-14
87	880	F3SG-4RA0880-14
95	960	F3SG-4RA0960-14
103	1040	F3SG-4RA1040-14
111	1120	F3SG-4RA1120-14
119	1200	F3SG-4RA1200-14
127	1280	F3SG-4RA1280-14
135	1360	F3SG-4RA1360-14
143	1440	F3SG-4RA1440-14
151	1520	F3SG-4RA1520-14
159	1600	F3SG-4RA1600-14
167	1680	F3SG-4RA1680-14
175	1760	F3SG-4RA1760-14
183	1840	F3SG-4RA1840-14
191	1920	F3SG-4RA1920-14
199	2000	F3SG-4RA2000-14
207	2080	F3SG-4RA2080-14

Hand and arm protection

Number of beams	Protective height (mm)	Model
8	190	F3SG-4RA0190-30
12	270	F3SG-4RA0270-30
16	350	F3SG-4RA0350-30
20	430	F3SG-4RA0430-30
24	510	F3SG-4RA0510-30
28	590	F3SG-4RA0590-30
32	670	F3SG-4RA0670-30
36	750	F3SG-4RA0750-30
40	830	F3SG-4RA0830-30
44	910	F3SG-4RA0910-30
48	990	F3SG-4RA0990-30
52	1070	F3SG-4RA1070-30
56	1150	F3SG-4RA1150-30
60	1230	F3SG-4RA1230-30
64	1310	F3SG-4RA1310-30
68	1390	F3SG-4RA1390-30
72	1470	F3SG-4RA1470-30
76	1550	F3SG-4RA1550-30
80	1630	F3SG-4RA1630-30
84	1710	F3SG-4RA1710-30
88	1790	F3SG-4RA1790-30
92	1870	F3SG-4RA1870-30
96	1950	F3SG-4RA1950-30
100	2030	F3SG-4RA2030-30
104	2110	F3SG-4RA2110-30
108	2190	F3SG-4RA2190-30
112	2270	F3SG-4RA2270-30
116	2350	F3SG-4RA2350-30
120	2430	F3SG-4RA2430-30
124	2510	F3SG-4RA2510-30

Accessories (Sold separately)

Safety light curtain connecting cable

Single-Ended Cable *

Type	Cable length	Model
For emitter M12 connector (5-pin), 5 wires Color: Gray	3 m	F39-JG3A-L
	7 m	F39-JG7A-L
	10 m	F39-JG10A-L
	15 m	F39-JG15A-L
	20 m	F39-JG20A-L
For receiver M12 connector (8-pin), 8 wires Color: Black	3 m	F39-JG3A-D
	7 m	F39-JG7A-D
	10 m	F39-JG10A-D
	15 m	F39-JG15A-D
	20 m	F39-JG20A-D

* A set of two Single-Ended Cables (one for emitter and one for receiver) is also available.
Model: Model number without the -L/-D at the end (F39-JG[]A)
Note: To extend the cable length to more than 20 m, add the F39-JG[]B Double-Ended Cable.

Double-Ended Cable *

For cable extension and simple wiring

Type	Cable length	Model
For emitter M12 connector (5-pin) on both ends Color: Gray	0.5 m	F39-JGR5B-L
	1 m	F39-JG1B-L
	3 m	F39-JG3B-L
	5 m	F39-JG5B-L
	7 m	F39-JG7B-L
	10 m	F39-JG10B-L
	15 m	F39-JG15B-L
	20 m	F39-JG20B-L
For receiver M12 connector (8-pin) on both ends Color: Black	0.5 m	F39-JGR5B-D
	1 m	F39-JG1B-D
	3 m	F39-JG3B-D
	5 m	F39-JG5B-D
	7 m	F39-JG7B-D
	10 m	F39-JG10B-D
	15 m	F39-JG15B-D
	20 m	F39-JG20B-D

* A set of two Double-Ended Cables (one for emitter and one for receiver) is also available.
Model: Model number without the -L/-D at the end (F39-JG[]B)
Note: To extend the cable length to more than 20 m, add the F39-JG[]B Double-Ended Cable to the F39-JG[]A Single-
Ended Cable.
To extend the cable length to more than 40 m, add several Double-Ended Cables to the Single-Ended Cable.
Example: To extend the cable length to 50 m, connect two F39-JG20B (20 m) cables and one F39-JG10A (10 m)
cable.

Connection example

F3SG-R Series Lineup 12

Y-Joint Plug/Socket Connector for F3SG-4RA[][][][]-14/-4RA[][][][]-30

For reduced wiring

Appearance	Type	Cable length	Specifications	Model
	M12 connectors. Used for reduced wiring.	0.5 m		F39-GCNY2

* Order the cable for emitter (end of model: -L) and the cable for receiver (end of model: -D).

Cascading Cable (2 cables per set, for emitter and receiver)

Appearance	Specifications	Cable length	Specifications	Model
	Emitter cable: Cap (5-pin), M12 connector (5-pin) Receiver cable: Cap (8-pin), M12 connector (8-pin)	0.2 m		F39-JGR2W

Note: The Double-Ended Cable (up to 10 m: F39-JG10B) can be added to extend the cable length between the series-connected sensors.
Cable length between sensors: 10 m max. (not including cascading cable (F39-JGR2W) and power cable)

Connection example

F3SG-R Series Lineup 18

Sensor Mounting Brackets

Specification	Application	Model
Standard Fixed Bracket	Bracket to mount the F3SG-R. Side mounting and backside mounting possible. (This is included as a standard accessory with the product. It comes as a set of two Brackets. Refer to note *1 for the number of sets provided with each model.)	F39-LGF
Standard Adjustable Bracket	Bracket to mount the F3SG-R. Beam alignment after mounting possible. The angle adjustment range is ±15°. Side mounting and backside mounting possible. (Sold separately as a set of two Brackets. Refer to note *1 for the number of sets required for each model.)	F39-LGA
Top/Bottom Adjustable Bracket *2	Bracket to mount the F3SG-R. Use this bracket at the top and bottom positions of the F3SG-R. Beam alignment after mounting possible. The angle adjustment range is ±22.5°. Side mounting and backside mounting possible. (Sold separately. 4 brackets per set.)	F39-LGTB
Top/Bottom Adjustable Bracket *2 (For user-made mounting part)	Top/Bottom Adjustable Bracket without a bracket to mount to the wall. Use the user’s own wall mounting part to suit the machine. (Sold separately. 4 brackets per set.)	F39-LGTB-1

*1. [for F3SG-4RA[][][][]-14]
– Protective height of 0160 to 1200: 2 sets, Protective height of 1280 to 2080: 3 sets
[for F3SG-4RA[][][][]-30]
– Protective height of 0190 to 1230: 2 sets, Protective height of 1310 to 2270: 3 sets, Protective height of 2350 to
2510: 4 sets
*2. Top/Bottom Adjustable Bracket cannot be used with the Standard Fixed Bracket. Use with the Standard Adjustable Bracket.
Using Top/Bottom Adjustable Brackets with Standard Adjustable Brackets
F3SG-4RA[][][][]-14:
Protective height of 1040 or less:
The Standard Adjustable Bracket is not required.
Please purchase 1 set of Top/Bottom Adjustable Brackets (F39-LGTB(-1)).
Protective height of 1120 to 1920:
Please purchase 1 set of Top/Bottom Adjustable Brackets (F39-LGTB(-1)) and 1 set of Standard Adjustable
Brackets (F39-LGA).
Protective height of 2000 to 2080:
Please purchase 1 set of Top/Bottom Adjustable Brackets (F39-LGTB(-1)) and 2 sets of Standard Adjustable
Brackets (F39-LGA).
F3SG-4RA[][][][]-30:
Protective height of 1070 or less:
The Standard Adjustable Bracket is not required.
Please purchase 1 set of Top/Bottom Adjustable Brackets (F39-LGTB(-1)).
Protective height of 1150 to 1950:
Please purchase 1 set of Top/Bottom Adjustable Brackets (F39-LGTB(-1)) and 1 set of Standard Adjustable
Brackets (F39-LGA).
Protective height of 2030 to 2510:
Please purchase 1 set of Top/Bottom Adjustable Brackets (F39-LGTB(-1)) and 2 sets of Standard Adjustable
Brackets (F39-LGA).

Interface units and configuration tool SD Manager 2

Type	Specifications	Model
SD Manager 2	The Configuration Tool SD Manager 2 is available to download from our website at http://www.ia.omron.com/f3sg-r_tool. To change the settings of the F3SG-RA using SD Manager 2, it is necessary to set the receiver’s two DIP switches No. 8 to ON.	–
Interface Unit	F39-GIF interface unit to connect the F3SG-RA receiver to a USB port of the PC Accessories: 0.3-m Dedicated Cable 1 (1), 2-m Dedicated Cable 2 (1), Instruction Manual	F39-GIF
Bluetooth Communication Unit	F39-BT bluetooth unit to enable bluetooth on the F3SG-RA IP67 rated when mated.	F39-BT

Lamp

Appearance	Type	Specifications	Model
	Lamp unit	The lamp unit can be connected to a receiver and turned ON based on the operation of F3SG-RA/RR. The lamp can indicate red, orange, and green colors, to which three different states can be assigned. IP67 rated when mated.	F39-LP
	Lamp and Bluetooth Communication Unit		F39-BTLP

End Cap

Appearance	Specifications	Model
	Housing color: Black For both emitter and receiver (Attached to the F3SG-RA. The End Cap can be purchased if lost.) IP67 rated when mated.	F39-CNM

Laser Pointer for F3SG-R

Appearance	Specifications	Model
	The laser pointer is attached on the optical surface of the F3SG-R to help coarse adjustment of beams.	F39-PTG

Spatter Protection Cover (2 covers per set, one for emitter and one for receiver)

Spatter Protection Covers include mounting brackets.
For Safety Light Curtain models of the protective height of 2,000 mm or longer, use two Spatter Protection Covers of different lengths.

Appearance	Safety Light Curtain Model		Model
Appearance	Finger protection	Hand and arm protection	Model
	F3SG-4RA0160-14	F3SG-4RA0190-30	F39-HGA0200
	F3SG-4RA0240-14	F3SG-4RA0270-30	F39-HGA0280
	F3SG-4RA0320-14	F3SG-4RA0350-30	F39-HGA0360
	F3SG-4RA0400-14	F3SG-4RA0430-30	F39-HGA0440
	F3SG-4RA0480-14	F3SG-4RA0510-30	F39-HGA0520
	F3SG-4RA0560-14	F3SG-4RA0590-30	F39-HGA0600
	F3SG-4RA0640-14	F3SG-4RA0670-30	F39-HGA0680
	F3SG-4RA0720-14	F3SG-4RA0750-30	F39-HGA0760
	F3SG-4RA0800-14	F3SG-4RA0830-30	F39-HGA0840
	F3SG-4RA0880-14	F3SG-4RA0910-30	F39-HGA0920
	F3SG-4RA0960-14	F3SG-4RA0990-30	F39-HGA1000
	F3SG-4RA1040-14	F3SG-4RA1070-30	F39-HGA1080
	F3SG-4RA1120-14	F3SG-4RA1150-30	F39-HGA1160
	F3SG-4RA1200-14	F3SG-4RA1230-30	F39-HGA1240
	F3SG-4RA1280-14	F3SG-4RA1310-30	F39-HGA1320
	F3SG-4RA1360-14	F3SG-4RA1390-30	F39-HGA1400
	F3SG-4RA1440-14	F3SG-4RA1470-30	F39-HGA1480
	F3SG-4RA1520-14	F3SG-4RA1550-30	F39-HGA1560
	F3SG-4RA1600-14	F3SG-4RA1630-30	F39-HGA1640
	F3SG-4RA1680-14	F3SG-4RA1710-30	F39-HGA1720
	F3SG-4RA1760-14	F3SG-4RA1790-30	F39-HGA1800
	F3SG-4RA1840-14	F3SG-4RA1870-30	F39-HGA1880
	F3SG-4RA1920-14	F3SG-4RA1950-30	F39-HGA1960
	F3SG-4RA2000-14	F3SG-4RA2030-30	F39-HGA1480
	F3SG-4RA2000-14	F3SG-4RA2030-30	F39-HGA0550
	F3SG-4RA2080-14	F3SG-4RA2110-30	F39-HGA1560
	F3SG-4RA2080-14	F3SG-4RA2110-30	F39-HGA0550
	–	F3SG-4RA2190-30	F39-HGA1640
	–	F3SG-4RA2190-30	F39-HGA0550
	–	F3SG-4RA2270-30	F39-HGA1720
	–	F3SG-4RA2270-30	F39-HGA0550
	–	F3SG-4RA2350-30	F39-HGA1800
	–	F3SG-4RA2350-30	F39-HGA0550
	–	F3SG-4RA2430-30	F39-HGA1880
	–	F3SG-4RA2430-30	F39-HGA0550
	–	F3SG-4RA2510-30	F39-HGA1960
	–	F3SG-4RA2510-30	F39-HGA0550

Note:
1. The operating range of the Safety Light Curtain attached with the product is 10% shorter than the rating.
2. The product extends over the DIP Switch cover of the Safety Light Curtain. Be sure to use the product only after all required settings are made to the DIP Switch.

Test Rod

Diameter	Model
14 mm dia.	F39-TRD14
30 mm dia.	F39-TRD30

F3SG-RR Robust type

Main Units

Safety Light Curtain

Finger protection

Number of beams	Protective height (mm)	Model
23	240	F3SG-4RR0240-14
31	320	F3SG-4RR0320-14
39	400	F3SG-4RR0400-14
47	480	F3SG-4RR0480-14
55	560	F3SG-4RR0560-14
63	640	F3SG-4RR0640-14
71	720	F3SG-4RR0720-14
79	800	F3SG-4RR0800-14
87	880	F3SG-4RR0880-14
95	960	F3SG-4RR0960-14
103	1040	F3SG-4RR1040-14
111	1120	F3SG-4RR1120-14
119	1200	F3SG-4RR1200-14
127	1280	F3SG-4RR1280-14
135	1360	F3SG-4RR1360-14
143	1440	F3SG-4RR1440-14
151	1520	F3SG-4RR1520-14
159	1600	F3SG-4RR1600-14
167	1680	F3SG-4RR1680-14
175	1760	F3SG-4RR1760-14
183	1840	F3SG-4RR1840-14
191	1920	F3SG-4RR1920-14

Hand and arm protection

Number of beams	Protective height (mm)	Model
12	240	F3SG-4RR0240-25
16	320	F3SG-4RR0320-25
20	400	F3SG-4RR0400-25
24	480	F3SG-4RR0480-25
28	560	F3SG-4RR0560-25
32	640	F3SG-4RR0640-25
36	720	F3SG-4RR0720-25
40	800	F3SG-4RR0800-25
44	880	F3SG-4RR0880-25
48	960	F3SG-4RR0960-25
52	1040	F3SG-4RR1040-25
56	1120	F3SG-4RR1120-25
60	1200	F3SG-4RR1200-25
64	1280	F3SG-4RR1280-25
68	1360	F3SG-4RR1360-25
72	1440	F3SG-4RR1440-25
76	1520	F3SG-4RR1520-25
80	1600	F3SG-4RR1600-25
84	1680	F3SG-4RR1680-25
88	1760	F3SG-4RR1760-25
92	1840	F3SG-4RR1840-25
96	1920	F3SG-4RR1920-25

Accessories (Sold separately)

Safety light curtain connecting cable

Single-Ended Cable (Oil-Resistant Cable)

Type	Cable length	Specifications	Model
For emitter M12 connector (8-pin), 5 wires Color: Gray	3 m	IP67 and IP67G (JIS C 0920 Annex 1) * rated when mated. * F3SG-RR meets the degree of protection when this cable is correctly connected with the power cable of the F3SG-RR. The degree of protection is not satisfied with the part where cable wires are uncovered.	F39-JD3RA-L
For emitter M12 connector (8-pin), 5 wires Color: Gray	7 m		F39-JD7RA-L
For receiver M12 connector (8-pin), 8 wires Color: Black	3 m		F39-JD3RA-D
For receiver M12 connector (8-pin), 8 wires Color: Black	7 m		F39-JD7RA-D

Note: To extend the cable length to more than 7 m, add the F39-JD[]B Double-Ended Cable.
When the Double-Ended Cable is used, protect it from cutting oil.

Single-Ended Cable (2 cables per set, one for emitter and one for receiver) *

Cable length	Specifications	Model
3 m	IP67* rated when mated. * When the accessory is used, protect it from cutting oil.	F39-JD3A
7 m		F39-JD7A
10 m		F39-JD10A
15 m		F39-JD15A
20 m		F39-JD20A

* The cable for emitter and the cable for receiver are available separately. Add ‘-L’ for emitter or ‘-D’ for receiver to the end of the model number when you order.
Single-Ended Cable for Emitter: F39-JD[]A-L, Single-Ended Cable for Receiver: F39-JD[]A-D
Note:
1. Use the F39-JD[]RA-L/-D for applications where cutting oil resistance is required.
2. To extend the cable length to more than 20 m, add the F39-JD[]B Double-Ended Cable.

Double-Ended Cable (2 cables per set, one for emitter and one for receiver) *

Cable length	Specifications	Model
0.5 m	IP67* rated when mated. * When the accessory is used, protect it from cutting oil.	F39-JDR5B
1 m		F39-JD1B
3 m		F39-JD3B
5 m		F39-JD5B
7 m		F39-JD7B
10 m		F39-JD10B
15 m		F39-JD15B
20 m		F39-JD20B

* The cable for emitter and the cable for receiver are available separately. Add ‘-L’ for emitter or ‘-D’ for receiver to the end of the model number when you order.
Double-Ended Cable for Emitter: F39-JD[]B-L, Double-Ended Cable for Receiver: F39-JD[]B-D
Note: To extend the cable length to more than 20 m, add the F39-JD[]B Double-Ended Cable to the F39-JD[]A Single- Ended Cable.
To extend the cable length to more than 40 m, add several Double-Ended Cables to the Single-Ended Cable.
Example: To extend the cable length to 50 m, connect two F39-JD20B (20 m) cables and one F39-JD10A (10 m) cable.

Connection example

F3SG-R Series Lineup 41

Reduced Wiring Connector System (Order the F39-CN5 and Cables for Reduce Wiring.)

Reduced Wiring Connector

Appearance	Specifications	Model
	IP67* rated when mated. * When the accessory is used, protect it from cutting oil.	F39-CN5

Note: When using the Reduced Wiring Connector (F39-CN5), the following functions are not available.
– Manual Reset
– External Device Monitoring
– Auxiliary Output
Make sure to keep the settings in the factory default.

F3SG-R Series Lineup 44

Cable for Reduce Wiring* (2 cables per set, one for emitter and one for receiver)

Cable length	Specifications	Remarks	Model
Emitter: 3 m Receiver: 3 m	IP67* rated when mated. * When the accessory is used, protect it from cutting oil.	Double-Ended Cable: F39-JD3B-L Single-Ended Cable: F39-JD3A-D	F39-JD0303BA
Emitter: 3 m Receiver: 7 m		Double-Ended Cable: F39-JD3B-L Single-Ended Cable: F39-JD7A-D	F39-JD0307BA
Emitter: 3 m Receiver: 10 m		Double-Ended Cable: F39-JD3B-L Single-Ended Cable: F39-JD10A-D	F39-JD0310BA
Emitter: 5 m Receiver: 3 m		Double-Ended Cable: F39-JD5B-L Single-Ended Cable: F39-JD3A-D	F39-JD0503BA
Emitter: 5 m Receiver: 7 m		Double-Ended Cable: F39-JD5B-L Single-Ended Cable: F39-JD7A-D	F39-JD0507BA
Emitter: 5 m Receiver: 10 m		Double-Ended Cable: F39-JD5B-L Single-Ended Cable: F39-JD10A-D	F39-JD0510BA
Emitter: 10 m Receiver: 3 m		Double-Ended Cable: F39-JD10B-L Single-Ended Cable: F39-JD3A-D	F39-JD1003BA
Emitter: 10 m Receiver: 7 m		Double-Ended Cable: F39-JD10B-L Single-Ended Cable: F39-JD7A-D	F39-JD1007BA
Emitter: 10 m Receiver: 10 m		Double-Ended Cable: F39-JD10B-L Single-Ended Cable: F39-JD10A-D	F39-JD1010BA

Note: A combination of emitter and receiver cables of other lengths than the above is also available. For details, contact your Omron representative.
* Double-Ended Cable for emitter and Single-Ended Cable for receiver.

Cascading Cable (2 cables per set, one for emitter and one for receiver)

Appearance	Type	Cable length	Specifications	Model
	Cap (8-pin), M12 connector (8-pin)	0.2 m	IP67* rated when mated. * When the accessory is used, protect it from cutting oil.	F39-JGR2WTS

Note: The Double-Ended Cable (up to 10 m: F39-JD10B) can be added to extend the cable length between the series-connected sensors.
Cable length between sensors: 10 m max. (not including cascading cable (F39-JGR2WTS) and power cable)

F3SG-R Series Lineup 49

Sensor Mounting Brackets

Specifications	Application	Model
Free-Location Bracket (Intermediate Bracket)	Beam alignment after mounting possible. The angle adjustment range is ±15°. Side mounting and backside mounting possible. (Sold separately as a set of 2 brackets. Refer to note *1 for the number of sets required for each model.)	F39-LGRA
Top/Bottom Bracket *2	Use this bracket at the top and bottom positions of the F3SG-RR. Beam alignment after mounting possible. The angle adjustment range is ±22.5°. Side mounting and backside mounting possible. (Sold separately as a set of 4 brackets.)	F39-LGRTB
Top/Bottom Bracket *2	The part of this bracket to contact with a wall surface has a different shape from the F39-LGRTB Top/Bottom Bracket. Use this bracket when replacing an existing safety light curtain with the F3SG-RR. (Sold separately as a set of 4 brackets.) Select a bracket that fit into the existing mounting hole.	F39-LGRTB-2
Top/Bottom Bracket *2		F39-LGRTB-3

*1. Protective height of 0240 to 1200 mm: 2 sets, Protective height of 1280 to 1920 mm: 3 sets
*2. Use the Top/Bottom Bracket in combination with the Intermediate Bracket.
Protective height of 1040 or less: The Intermediate Bracket is not required. Please purchase 1 set of Top/Bottom Brackets (F39-LGRTB(-2/-3)).
Protective height of 1120 to 1920:Please purchase 1 set of Top/Bottom Brackets (F39-LGRTB(-2/-3)) and 1 set of Intermediate Brackets (F39- LGRA).

Interface units and configuration tool SD Manager 2

Type	Specifications	Model
SD Manager 2	The Configuration Tool SD Manager 2 is available to download from our website at http://www.ia.omron.com/f3sg-r_tool	–
Interface Unit	F39-GIF-1 interface unit to connect the F3SG-RR receiver to a USB port of the PC Accessories: F39-CN1 Branch Connector (1), Connector Cap (1), 2-m Dedicated Cable (1), Instruction Manual	F39-GIF-1
Bluetooth Communication Unit	F39-BT bluetooth unit to enable bluetooth on the F3SG-RR IP67 rated when mated.	F39-BT

* When the accessory is used, protect it from cutting oil.

Lamp *

Appearance	Type	Specifications	Model
	Lamp	The lamp unit can be connected to a receiver and turned ON based on the operation of F3SG-RA/RR. The lamp can indicate red, orange, and green colors, to which three different states can be assigned. IP67 rated when mated.	F39-LP
	Lamp and Bluetooth Communication Unit		F39-BTLP

* When the accessory is used, protect it from cutting oil.

End Cap 1 2

Appearance	Specifications	Model
	Housing color: Black For both emitter and receiver (Attached to the F3SG-RR. The End Cap can be purchased if lost.) IP67 rated when mated.	F39-CNM

*1. This accessory can also be used with the F3SG-RA.
*2. When the accessory is used, protect it from cutting oil.

Laser Pointer for F3SG-R *

Appearance	Specifications	Model
	The laser pointer is attached on the optical surface of the F3SG-R to help coarse adjustment of beams.	F39-PTG

* When the accessory is used, protect it from cutting oil.

Test Rod

Diameter	Model
14 mm dia.	F39-TRD14
25 mm dia.	F39-TRD25

F3SG-RE Easy type

Main Units

Safety Light Curtain

Finger protection

Number of beams	Protective height (mm)	Model
Number of beams	Protective height (mm)	PNP output	NPN output
15	160	F3SG-4RE0160P14	F3SG-4RE0160N14
23	240	F3SG-4RE0240P14	F3SG-4RE0240N14
31	320	F3SG-4RE0320P14	F3SG-4RE0320N14
39	400	F3SG-4RE0400P14	F3SG-4RE0400N14
47	480	F3SG-4RE0480P14	F3SG-4RE0480N14
55	560	F3SG-4RE0560P14	F3SG-4RE0560N14
63	640	F3SG-4RE0640P14	F3SG-4RE0640N14
71	720	F3SG-4RE0720P14	F3SG-4RE0720N14
79	800	F3SG-4RE0800P14	F3SG-4RE0800N14
87	880	F3SG-4RE0880P14	F3SG-4RE0880N14
95	960	F3SG-4RE0960P14	F3SG-4RE0960N14
103	1,040	F3SG-4RE1040P14	F3SG-4RE1040N14
111	1,120	F3SG-4RE1120P14	F3SG-4RE1120N14
119	1,200	F3SG-4RE1200P14	F3SG-4RE1200N14
127	1,280	F3SG-4RE1280P14	F3SG-4RE1280N14
135	1,360	F3SG-4RE1360P14	F3SG-4RE1360N14
143	1,440	F3SG-4RE1440P14	F3SG-4RE1440N14
151	1,520	F3SG-4RE1520P14	F3SG-4RE1520N14
159	1,600	F3SG-4RE1600P14	F3SG-4RE1600N14
167	1,680	F3SG-4RE1680P14	F3SG-4RE1680N14
175	1,760	F3SG-4RE1760P14	F3SG-4RE1760N14
183	1,840	F3SG-4RE1840P14	F3SG-4RE1840N14
191	1,920	F3SG-4RE1920P14	F3SG-4RE1920N14
199	2,000	F3SG-4RE2000P14	F3SG-4RE2000N14
207	2,080	F3SG-4RE2080P14	F3SG-4RE2080N14

Hand and arm protection

Number of beams	Protective height (mm)	Model
Number of beams	Protective height (mm)	PNP	NPN
8	190	F3SG-4RE0190P30	F3SG-4RE0190N30
12	270	F3SG-4RE0270P30	F3SG-4RE0270N30
16	350	F3SG-4RE0350P30	F3SG-4RE0350N30
20	430	F3SG-4RE0430P30	F3SG-4RE0430N30
24	510	F3SG-4RE0510P30	F3SG-4RE0510N30
28	590	F3SG-4RE0590P30	F3SG-4RE0590N30
32	670	F3SG-4RE0670P30	F3SG-4RE0670N30
36	750	F3SG-4RE0750P30	F3SG-4RE0750N30
40	830	F3SG-4RE0830P30	F3SG-4RE0830N30
44	910	F3SG-4RE0910P30	F3SG-4RE0910N30
48	990	F3SG-4RE0990P30	F3SG-4RE0990N30
52	1,070	F3SG-4RE1070P30	F3SG-4RE1070N30
56	1,150	F3SG-4RE1150P30	F3SG-4RE1150N30
60	1,230	F3SG-4RE1230P30	F3SG-4RE1230N30
64	1,310	F3SG-4RE1310P30	F3SG-4RE1310N30
68	1,390	F3SG-4RE1390P30	F3SG-4RE1390N30
72	1,470	F3SG-4RE1470P30	F3SG-4RE1470N30
76	1,550	F3SG-4RE1550P30	F3SG-4RE1550N30
80	1,630	F3SG-4RE1630P30	F3SG-4RE1630N30
84	1,710	F3SG-4RE1710P30	F3SG-4RE1710N30
88	1,790	F3SG-4RE1790P30	F3SG-4RE1790N30
92	1,870	F3SG-4RE1870P30	F3SG-4RE1870N30
96	1,950	F3SG-4RE1950P30	F3SG-4RE1950N30
100	2,030	F3SG-4RE2030P30	F3SG-4RE2030N30
104	2,110	F3SG-4RE2110P30	F3SG-4RE2110N30
108	2,190	F3SG-4RE2190P30	F3SG-4RE2190N30
112	2,270	F3SG-4RE2270P30	F3SG-4RE2270N30
116	2,350	F3SG-4RE2350P30	F3SG-4RE2350N30
120	2,430	F3SG-4RE2430P30	F3SG-4RE2430N30
124	2,510	F3SG-4RE2510P30	F3SG-4RE2510N30

Accessories (Sold separately)

Safety light curtain connecting cable

Single-Ended Cable (Round Water-resistant Connector: Connector Connected to Cable, Socket on One Cable End)

Type	Cable length	Model
M12 connector (4-pin), 4 wires	1 m	XS5F-D421-C80-F
	2 m	XS5F-D421-D80-F
	3 m	XS5F-D421-E80-F
	5 m	XS5F-D421-G80-F
	10 m	XS5F-D421-J80-F
	20 m	XS5F-D421-L80-F

Note:
1. One cable that can be used for both emitter and receiver is provided. Order two cables for one set of safety light curtains.
2. To extend the cable length to 20 m or more, add the XS5W-D421-[]81-F Double-Ended Cable.

Double-Ended Cable (Round Water-resistant Connector: Connectors Connected to Cable, Socket and Plug on Cable Ends)

For cable extension and simple wiring

Type	Cable length	Model
M12 connector (4-pin) on both ends	1 m	XS5W-D421-C81-F
	2 m	XS5W-D421-D81-F
	3 m	XS5W-D421-E81-F
	5 m	XS5W-D421-G81-F
	10 m	XS5W-D421-J81-F
	20 m	XS5W-D421-L81-F

pNote: 1. One cable that can be used for both emitter and receiver is provided. Order two cables for one set of safety light
curtains.
2. To extend the cable length to more than 20 m, add the XS5W-D421-[]81-F Double-Ended Cable to the XS5F-
D421-[]80-F Single-Ended Cable.
To extend the cable length to more than 40 m, add several Double-Ended Cables to the Single-Ended Cable.
Example: To extend the cable length to 50 m, connect two XS5W-D421-L81-F (20 m) cables and one XS5F-D421-
J80-F (10 m) cable.

Connection example

F3SG-R Series Lineup 72

Y-Joint Plug/Socket Connector for Easy type F3SG-RE

Appearance	Type	Cable length	Specifications	Model
	M12 connectors. Used for reduced wiring.	0.5 m	When using the reduced wiring connector system F39-GCNY1, the Operating Range Selection is fixed to Long Mode.	F39-GCNY1

Sensor Mounting Brackets

Specification	Application	Model
Standard Fixed Bracket	Bracket to mount the F3SG-R. Side mounting and backside mounting possible. (This is included as a standard accessory with the product. It comes as a set of two Brackets. Refer to note *1 for the number of sets provided with each model.)	F39-LGF
Standard Adjustable Bracket	Bracket to mount the F3SG-R. Beam alignment after mounting possible.The angle adjustment range is ±15°. Side mounting and backside mounting possible. (Sold separately as a set of two Brackets. Refer to note *1 for the number of sets required for each model.)	F39-LGA
Top/Bottom Adjustable Bracket *2	Bracket to mount the F3SG-R. Use this bracket at the top and bottom positions of the F3SG-R. Beam alignment after mounting possible. The angle adjustment range is ±22.5°. Side mounting and backside mounting possible. (Sold separately. 4 brackets per set.)	F39-LGTB
Top/Bottom Adjustable Bracket *2 (For user-made mounting part)	Top/Bottom Adjustable Bracket without a bracket to mount to the wall. Use the user’s own wall mounting part to suit the machine. (Sold separately. 4 brackets per set.)	F39-LGTB-1

*1. [for F3SG-4RE[][][][][]14] Protective height of 0160 to 1200: 2 sets, Protective height of 1280 to 2080: 3 sets
[for F3SG-4RE[][][][][]30] Protective height of 0190 to 1230: 2 sets, Protective height of 1310 to 2270: 3 sets,
Protective height of 2350 to 2510: 4 sets
*2. Top/Bottom Adjustable Bracket cannot be used with the Standard Fixed Bracket. Use with the Standard Adjustable
Bracket.
Using Top/Bottom Adjustable Brackets with Standard Adjustable Brackets
F3SG-4RE[][][][]-14:
Protective height of 1040 or less:
The Standard Adjustable Bracket is not required.
Please purchase 1 set of Top/Bottom Adjustable Brackets (F39-LGTB(-1)).
Protective height of 1120 to 1920:
Please purchase 1 set of Top/Bottom Adjustable Brackets (F39-LGTB(-1)) and 1 set of Standard Adjustable
Brackets (F39-LGA).
Protective height of 2000 to 2080:
Please purchase 1 set of Top/Bottom Adjustable Brackets (F39-LGTB(-1)) and 2 sets of Standard Adjustable
Brackets (F39-LGA).
F3SG-4RE[][][][]-30:
Protective height of 1070 or less:
The Standard Adjustable Bracket is not required.
Please purchase 1 set of Top/Bottom Adjustable Brackets (F39-LGTB(-1)).
Protective height of 1150 to 1950:
Please purchase 1 set of Top/Bottom Adjustable Brackets (F39-LGTB(-1)) and 1 set of Standard Adjustable
Brackets (F39-LGA).
Protective height of 2030 to 2510:
Please purchase 1 set of Top/Bottom Adjustable Brackets (F39-LGTB(-1)) and 2 sets of Standard Adjustable
Brackets (F39-LGA).

Laser Pointer for F3SG-R

Appearance	Specifications	Model
	The laser pointer is attached on the optical surface of the F3SG-R to help coarse adjustment of beams.	F39-PTG

Spatter Protection Cover (2 covers per set, one for emitter and one for receiver)

Spatter Protection Covers include the mounting brackets
For Safety Light Curtain models of the protective height of 2,000 mm or longer, use two Spatter Protection Covers of different lengths.

Appearance	Safety Light Curtain Model		Model
Appearance	Finger protection	Hand and arm protection	Model
	F3SG-4RE0160[]14	F3SG-4RE0190[]30	F39-HGB0180
	F3SG-4RE0240[]14	F3SG-4RE0270[]30	F39-HGB0260
	F3SG-4RE0320[]14	F3SG-4RE0350[]30	F39-HGB0340
	F3SG-4RE0400[]14	F3SG-4RE0430[]30	F39-HGB0420
	F3SG-4RE0480[]14	F3SG-4RE0510[]30	F39-HGB0500
	F3SG-4RE0560[]14	F3SG-4RE0590[]30	F39-HGB0580
	F3SG-4RE0640[]14	F3SG-4RE0670[]30	F39-HGB0660
	F3SG-4RE0720[]14	F3SG-4RE0750[]30	F39-HGB0740
	F3SG-4RE0800[]14	F3SG-4RE0830[]30	F39-HGB0820
	F3SG-4RE0880[]14	F3SG-4RE0910[]30	F39-HGB0900
	F3SG-4RE0960[]14	F3SG-4RE0990[]30	F39-HGB0980
	F3SG-4RE1040[]14	F3SG-4RE1070[]30	F39-HGB1060
	F3SG-4RE1120[]14	F3SG-4RE1150[]30	F39-HGB1140
	F3SG-4RE1200[]14	F3SG-4RE1230[]30	F39-HGB1220
	F3SG-4RE1280[]14	F3SG-4RE1310[]30	F39-HGB1300
	F3SG-4RE1360[]14	F3SG-4RE1390[]30	F39-HGB1380
	F3SG-4RE1440[]14	F3SG-4RE1470[]30	F39-HGB1460
	F3SG-4RE1520[]14	F3SG-4RE1550[]30	F39-HGB1540
	F3SG-4RE1600[]14	F3SG-4RE1630[]30	F39-HGB1620
	F3SG-4RE1680[]14	F3SG-4RE1710[]30	F39-HGB1700
	F3SG-4RE1760[]14	F3SG-4RE1790[]30	F39-HGB1780
	F3SG-4RE1840[]14	F3SG-4RE1870[]30	F39-HGB1860
	F3SG-4RE1920[]14	F3SG-4RE1950[]30	F39-HGB1940
	F3SG-4RE2000[]14	F3SG-4RE2030[]30	F39-HGB1460
	F3SG-4RE2000[]14	F3SG-4RE2030[]30	F39-HGA0550
	F3SG-4RE2080[]14	F3SG-4RE2110[]30	F39-HGB1540
	F3SG-4RE2080[]14	F3SG-4RE2110[]30	F39-HGA0550
	–	F3SG-4RE2190[]30	F39-HGB1620
	–	F3SG-4RE2190[]30	F39-HGA0550
	–	F3SG-4RE2270[]30	F39-HGB1700
	–	F3SG-4RE2270[]30	F39-HGA0550
	–	F3SG-4RE2350[]30	F39-HGB1780
	–	F3SG-4RE2350[]30	F39-HGA0550
	–	F3SG-4RE2430[]30	F39-HGB1860
	–	F3SG-4RE2430[]30	F39-HGA0550
	–	F3SG-4RE2510[]30	F39-HGB1940
	–	F3SG-4RE2510[]30	F39-HGA0550

Note: The operating range of the Safety Light Curtain attached with the product is 10% shorter than the rating.

Test Rod

Diameter	Model
14 mm dia.	F39-TRD14
30 mm dia.	F39-TRD30

F3SG-RA-01TS

Main Units

Safety Light Curtain

Hand and arm protection

Number of beams	Protective height (mm)	Model
8	185	F3SG-4RA0185-25-01TS
12	265	F3SG-4RA0265-25-01TS
16	345	F3SG-4RA0345-25-01TS
20	425	F3SG-4RA0425-25-01TS
24	505	F3SG-4RA0505-25-01TS
28	585	F3SG-4RA0585-25-01TS
32	665	F3SG-4RA0665-25-01TS
36	745	F3SG-4RA0745-25-01TS
40	825	F3SG-4RA0825-25-01TS
44	905	F3SG-4RA0905-25-01TS
48	985	F3SG-4RA0985-25-01TS
52	1,065	F3SG-4RA1065-25-01TS
56	1,145	F3SG-4RA1145-25-01TS
60	1,225	F3SG-4RA1225-25-01TS
64	1,305	F3SG-4RA1305-25-01TS
68	1,385	F3SG-4RA1385-25-01TS
72	1,465	F3SG-4RA1465-25-01TS
76	1,545	F3SG-4RA1545-25-01TS
80	1,625	F3SG-4RA1625-25-01TS
84	1,705	F3SG-4RA1705-25-01TS
88	1,785	F3SG-4RA1785-25-01TS
92	1,865	F3SG-4RA1865-25-01TS
96	1,945	F3SG-4RA1945-25-01TS

Accessories (Sold separately)

Safety light curtain connecting cable

Single-Ended Cable (2 cables per set, one for emitter and one for receiver) *

Appearance	Cable length	Specifications	Model
	3m		F39-JD3A
	7m		F39-JD7A
	10m		F39-JD10A
	15m		F39-JD15A
	20m		F39-JD20A

* The cable for emitter and the cable for receiver are available separately. Add ‘-L’ for emitter or ‘-D’ for receiver to the end of the model number when you order.
Single-Ended Cable for Emitter: F39-JD[]A-L, Single-Ended Cable for Receiver: F39-JD[]A-D
Note: To extend the cable length to more than 20 m, add the F39-JD[]B Double-Ended Cable.

Doble-Ended Cable (2 cables per set, one for emitter and one for receiver) *

For cable extension

Appearance	Cable length	Specifications	Model
	0.5 m		F39-JDR5B
	1 m		F39-JD1B
	3 m		F39-JD3B
	5 m		F39-JD5B
	7 m		F39-JD7B
	10 m		F39-JD10B
	15 m		F39-JD15B
	20 m		F39-JD20B

* The cable for emitter and the cable for receiver are available separately. Add ‘-L’ for emitter or ‘-D’ for receiver to the end
of the model number when you order.
Double-Ended Cable for Emitter: F39-JD(R)[]B-L, Double-Ended Cable for Receiver: F39-JD(R)[]B-D
Note: To extend the cable length to more than 20 m, add the F39-JD[]B Double-Ended Cable to the F39-JD[]A Single-
Ended Cable.
To extend the cable length to more than 40 m, add several Double-Ended Cables to the Single-Ended Cable.
Example: To extend the cable length to 50 m, connect two F39-JD20B (20 m) cables and one F39-JD10A (10 m)
cable.

Connection example

F3SG-R Series Lineup 91

Cascading Cable (2 cables per set, for emitter and receiver)

Appearance	Type	Cable length	Specifications	Model
	Cap (8-pin), M12 connector (8-pin)	0.2m		F39-JGR2WTS

Note: The Double-Ended Cable (up to 10 m: F39-JD10B) can be added to extend the cable length between the series-connected sensors. Cable length between sensors: 10 m max. (not including cascading cable (F39-JGR2WTS) and power cable)

Connection example

F3SG-R Series Lineup 94

Reduced Wiring Connector System (Order the F39-CN5 and Cables for Reduce Wiring.)

Reduced Wiring Connector

Appearance	Specifications	Model
	IP67 rated when mated.	F39-CN5

Note: When using the Reduced Wiring Connector (F39-CN5), the following functions are not available.
– External Device Monitoring
– Auxiliary Output

F3SG-R Series Lineup 97

Cable for Reduce Wiring* (2 cables per set, one for emitter and one for receiver)

Cable length	Specifications	Remarks	Model
Emitter: 3 m Receiver: 3 m	IP67 rated when mated.	Double-Ended Cable: F39-JD3B-L Single-Ended Cable: F39-JD3A-D	F39-JD0303BA
Emitter: 3 m Receiver: 7 m		Double-Ended Cable: F39-JD3B-L Single-Ended Cable: F39-JD7A-D	F39-JD0307BA
Emitter: 3 m Receiver: 10 m		Double-Ended Cable: F39-JD3B-L Single-Ended Cable: F39-JD10A-D	F39-JD0310BA
Emitter: 5 m Receiver: 3 m		Double-Ended Cable: F39-JD5B-L Single-Ended Cable: F39-JD3A-D	F39-JD0503BA
Emitter: 5 m Receiver: 7 m		Double-Ended Cable: F39-JD5B-L Single-Ended Cable: F39-JD7A-D	F39-JD0507BA
Emitter: 5 m Receive: 10m		Double-Ended Cable: F39-JD5B-L Single-Ended Cable: F39-JD10A-D	F39-JD0510BA
Emitter: 10 m Receiver: 3 m		Double-Ended Cable: F39-JD10B-L Single-Ended Cable: F39-JD3A-D	F39-JD1003BA
Emitter: 10 m Receiver: 7 m		Double-Ended Cable: F39-JD10B-L Single-Ended Cable: F39-JD7A-D	F39-JD1007BA
Emitter: 10 m Receiver: 10 m		Double-Ended Cable: F39-JD10B-L Single-Ended Cable: F39-JD10A-D	F39-JD1010BA

Sensor Mounting Brackets

Specification	Application	Model
Standard Fixed Bracket	Bracket to mount the F3SG-RA-01TS. Side mounting and backside mounting possible. (Sold separately as a set of two Brackets. Refer to note *1 for the number of sets required for each model.)	F39-LGF
Standard Adjustable Bracket	Bracket to mount the F3SG-RA-01TS. Beam alignment after mounting possible. The angle adjustment range is ±15°. Side mounting and backside mounting possible. (Sold separately as a set of two Brackets. Refer to note *1 for the number of sets required for each model.)	F39-LGA
Top/Bottom Adjustable Bracket *2	Bracket to mount the F3SG-RA-01TS. Use this bracket at the top and bottom positions of the F3SG-RA-01TS. Beam alignment after mounting possible. The angle adjustment range is ±22.5°. Side mounting and backside mounting possible. (Sold separately. 4 brackets per set.)	F39-LGTB
Top/Bottom Adjustable Bracket *2 (For user-made mounting part)	Top/Bottom Adjustable Bracket without a bracket to mount to the wall. Use the user’s own wall mounting part to suit the machine. (Sold separately. 4 brackets per set.)	F39-LGTB-1

*1. Protective height of 0185 to 1225: 2 sets, Protective height of 1305 to 1945: 3 sets
*2. Top/Bottom Adjustable Bracket cannot be used with the Standard Fixed Bracket. Use with the Standard Adjustable
Bracket.
Using Top/Bottom Adjustable Brackets with Standard Adjustable Brackets
Protective height of 1065 or less:
The Standard Adjustable Bracket is not required.
Please purchase 1 set of Top/Bottom Adjustable Brackets (F39-LGTB(-1)).
Protective height of 1145 to 1945:
Please purchase 1 set of Top/Bottom Adjustable Brackets (F39-LGTB(-1)) and 1 set of Standard Adjustable Brackets (F39-LGA).

Interface units and configuration tool SD Manager 2 *

Type	Specifications	Model
SD Manager 2	The Configuration Tool SD Manager 2 is available to download from our website at http://www.ia.omron.com/f3sg-r_tool.	–
Interface Unit	F39-GIF interface unit to connect the F3SG-RA-01TS receiver to a USB port of the PC Accessories: 0.3-m Dedicated Cable 1 (1), 2-m Dedicated Cable 2 (1), Instruction Manual	F39-GIF
Bluetooth Communication Unit	F39-BT bluetooth unit to enable bluetooth on the F3SG-RA IP67 rated when mated.	F39-BT

* The F3SG-RA-01TS provides only the monitoring functionality.

Lamp

Appearance	Type	Specifications	Model
	Lamp unit	The lamp can be connected to a receiver and turned ON based on the operation of F3SG-RA. The lamp output pattern is set as follows: Red (ON): Inverted signal of safety output information Orange (Blink once): Inverted signal of stable-state information Green (ON): Safety output information IP67 rated when mated.	F39-LP
	Lamp and Bluetooth Communication Unit		F39-BTLP

End Cap *

Appearance	Specifications	Model
	Housing color: Black For both emitter and receiver (Attached to the F3SG-RA-01TS. The End Cap can be purchased if lost.) IP67 rated when mated.	F39-CNM

* This accessory can also be used with the F3SG-RA-02TS.

Laser Pointer for F3SG-R

Appearance	Specifications	Model
	The laser pointer is attached on the optical surface of the F3SG-R to help coarse adjustment of beams.	F39-PTG

Spatter Protection Cover (2 covers per set, one for emitter and one for receiver)

Spatter Protection Covers include mounting brackets.

Appearance	Safety Light Curtain Model	Model
Appearance	Hand protection	Model
	F3SG-4RA0185-25-01TS	F39-HGA0200
	F3SG-4RA0265-25-01TS	F39-HGA0280
	F3SG-4RA0345-25-01TS	F39-HGA0360
	F3SG-4RA0425-25-01TS	F39-HGA0440
	F3SG-4RA0505-25-01TS	F39-HGA0520
	F3SG-4RA0585-25-01TS	F39-HGA0600
	F3SG-4RA0665-25-01TS	F39-HGA0680
	F3SG-4RA0745-25-01TS	F39-HGA0760
	F3SG-4RA0825-25-01TS	F39-HGA0840
	F3SG-4RA0905-25-01TS	F39-HGA0920
	F3SG-4RA0985-25-01TS	F39-HGA1000
	F3SG-4RA1065-25-01TS	F39-HGA1080
	F3SG-4RA1145-25-01TS	F39-HGA1160
	F3SG-4RA1225-25-01TS	F39-HGA1240
	F3SG-4RA1305-25-01TS	F39-HGA1320
	F3SG-4RA1385-25-01TS	F39-HGA1400
	F3SG-4RA1465-25-01TS	F39-HGA1480
	F3SG-4RA1545-25-01TS	F39-HGA1560
	F3SG-4RA1625-25-01TS	F39-HGA1640
	F3SG-4RA1705-25-01TS	F39-HGA1720
	F3SG-4RA1785-25-01TS	F39-HGA1800
	F3SG-4RA1865-25-01TS	F39-HGA1880
	F3SG-4RA1945-25-01TS	F39-HGA1960

Test Rod

Diameter	Model
25 mm dia.	F39-TRD25

F3SG-RA-02TS

Main Units

Safety Light Curtain

Hand and arm protection

Number of beams	Protective height (mm)	Model
12	240	F3SG-4RA0240-25-02TS
16	320	F3SG-4RA0320-25-02TS
20	400	F3SG-4RA0400-25-02TS
24	480	F3SG-4RA0480-25-02TS
28	560	F3SG-4RA0560-25-02TS
32	640	F3SG-4RA0640-25-02TS
36	720	F3SG-4RA0720-25-02TS
40	800	F3SG-4RA0800-25-02TS
44	880	F3SG-4RA0880-25-02TS
48	960	F3SG-4RA0960-25-02TS
52	1,040	F3SG-4RA1040-25-02TS
56	1,120	F3SG-4RA1120-25-02TS
60	1,200	F3SG-4RA1200-25-02TS
64	1,280	F3SG-4RA1280-25-02TS
68	1,360	F3SG-4RA1360-25-02TS
72	1,440	F3SG-4RA1440-25-02TS
76	1,520	F3SG-4RA1520-25-02TS
80	1,600	F3SG-4RA1600-25-02TS
84	1,680	F3SG-4RA1680-25-02TS
88	1,760	F3SG-4RA1760-25-02TS
92	1,840	F3SG-4RA1840-25-02TS
96	1,920	F3SG-4RA1920-25-02TS

Accessories (Sold separately)

Safety light curtain connecting cable

Single-Ended Cable (Oil-Resistant Cable)

Type	Cable length	Specifications	Model
For emitter M12 connector (8-pin), 5 wires Color: Gray	3m	IP67 and IP67G (JIS C 0920 Annex 1) * rated when mated. * F3SG-RA-02TS meets the degree of protection when this cable is correctly connected with the power cable of the F3SG-RA-02TS. The degree of protection is not satisfied with the part where cable wires are uncovered.	F39-JD3RA-L
For emitter M12 connector (8-pin), 5 wires Color: Gray	7m		F39-JD7RA-L
For receiver M12 connector (8-pin), 8 wires Color: Black	3m		F39-JD3RA-D
For receiver M12 connector (8-pin), 8 wires Color: Black	7m		F39-JD7RA-D

Note: To extend the cable length to more than 7 m, add the F39-JD[]B Double-Ended Cable.
When the Double-Ended Cable is used, protect it from cutting oil.

Single-Ended Cable (2 cables per set, one for emitter and one for receiver) *

Cable length	Specifications	Model
3m	IP67* rated when mated. * When the accessory is used, protect it from cutting oil.	F39-JD3A
7m		F39-JD7A
10m		F39-JD10A
15m		F39-JD15A
20m		F39-JD20A

Double-Ended Cable (2 cables per set, one for emitter and one for receiver) *

Cable length	Specifications	Model
0.5m	IP67* rated when mated. * When the accessory is used, protect it from cutting oil.	F39-JDR5B
1m		F39-JD1B
3m		F39-JD3B
5m		F39-JD5B
7m		F39-JD7B
10m		F39-JD10B
15m		F39-JD15B
20m		F39-JD20B

* The cable for emitter and the cable for receiver are available separately. Add ‘-L’ for emitter or ‘-D’ for receiver to the end
of the model number when you order.
Double-Ended Cable for Emitter: F39-JD[]B-L, Double-Ended Cable for Receiver: F39-JD[]B-D
Note: To extend the cable length to more than 20 m, add the F39-JD[]B Double-Ended Cable to the F39-JD[]A Single-
Ended Cable.
To extend the cable length to more than 40 m, add several Double-Ended Cables to the Single-Ended Cable.
Example: To extend the cable length to 50 m, connect two F39-JD20B (20 m) cables and one F39-JD10A (10 m)
cable.

Connection example

F3SG-R Series Lineup 123

Reduced Wiring Connector System (Order the F39-CN5 and Cables for Reduce Wiring.)

Reduced Wiring Connector

Appearance	Specifications	Model
	IP67* rated when mated. * When the accessory is used, protect it from cutting oil.	F39-CN5

Note: When using the Reduced Wiring Connector (F39-CN5), the following functions are not available.
– External Device Monitoring
– Auxiliary Output

F3SG-R Series Lineup 126

Cable for Reduce Wiring* (2 cables per set, one for emitter and one for receiver

Cable length	Specifications	Remarks	Model
Emitter: 3 m Receiver: 3 m	IP67* rated when mated. * When the accessory is used, protect it from cutting oil	Double-Ended Cable: F39-JD3B-L Single-Ended Cable: F39-JD3A-D	F39-JD0303BA
Emitter: 3 m Receiver: 7 m		Double-Ended Cable: F39-JD3B-L Single-Ended Cable: F39-JD7A-D	F39-JD0307BA
Emitter: 3 m Receiver: 10 m		Double-Ended Cable: F39-JD3B-L Single-Ended Cable: F39-JD10A-D	F39-JD0310BA
Emitter: 5 m Receiver: 3 m		Double-Ended Cable: F39-JD5B-L Single-Ended Cable: F39-JD3A-D	F39-JD0503BA
Emitter: 5 m Receiver: 7 m		Double-Ended Cable: F39-JD5B-L Single-Ended Cable: F39-JD7A-D	F39-JD0507BA
Emitter: 5 m Receiver: 10 m		Double-Ended Cable: F39-JD5B-L Single-Ended Cable: F39-JD10A-D	F39-JD0510BA
Emitter: 10 m Receiver: 3 m		Double-Ended Cable: F39-JD10B-L Single-Ended Cable: F39-JD3A-D	F39-JD1003BA
Emitter: 10 m Receiver: 7 m		Double-Ended Cable: F39-JD10B-L Single-Ended Cable: F39-JD7A-D	F39-JD1007BA
Emitter: 10 m Receiver: 10 m		Double-Ended Cable: F39-JD10B-L Single-Ended Cable: F39-JD10A-D	F39-JD1010BA

Cascading Cable (2 cables per set, one for emitter and one for receiver)

Appearance	Type	Cable length	Specifications	Model
	Cap (8-pin), M12 connector (8-pin)	0.2m	* When the accessory is used, protect it from cutting oil.	F39-JGR2WTS

F3SG-R Series Lineup 131

Sensor Mounting Brackets

Specifications	Application	Model
Free-Location Bracket (Intermediate Bracket)	Beam alignment after mounting possible. The angle adjustment range is ±15°. Side mounting and backside mounting possible. (Sold separately as a set of 2 brackets. Refer to note *1 for the number of sets required for each model.)	F39-LGRA
Top/Bottom Bracket *2	Use this bracket at the top and bottom positions of the F3SG-RA-02TS. Beam alignment after mounting possible. The angle adjustment range is ±22.5°. Side mounting and backside mounting possible. (Sold separately as a set of 4 brackets.)	F39-LGRTB
Top/Bottom Bracket *2	The part of this bracket to contact with a wall surface has a different shape from the F39-LGRTB Top/Bottom Bracket. Use this bracket when replacing an existing safety light curtain with the F3SG-RA-02TS. (Sold separately as a set of 4 brackets.) Select a bracket that fit into the existing mounting hole.	F39-LGRTB-2
Top/Bottom Bracket *2		F39-LGRTB-3

*1. Protective height of 0240 to 1200 mm: 2 sets, Protective height of 1280 to 1920 mm: 3 sets
*2. Use the Top/Bottom Bracket in combination with the Intermediate Bracket.
Protective height of 1040 or less:
The Intermediate Bracket is not required. Please purchase 1 set of Top/Bottom Brackets (F39-LGRTB(-2/-3)).
Protective height of 1120 to 1920:
Please purchase 1 set of Top/Bottom Brackets (F39-LGRTB(-2/-3)) and 1 set of Intermediate Brackets (F39-LGRA).

Interface units and configuration tool SD Manager 2 1 2

Type	Specifications	Model
SD Manager 2	The Configuration Tool SD Manager 2 is available to download from our website at http://www.ia.omron.com/f3sg-r_tool	–
Interface Unit	F39-GIF-1 interface unit to connect the F3SG-RA-02TS receiver to a USB port of the PC Accessories: F39-CN1 Branch Connector (1), Connector Cap (1), 2-m Dedicated Cable (1), Instruction Manual	F39-GIF-1
Bluetooth Communication Unit	F39-BT bluetooth unit to enable bluetooth on the F3SG-RA IP67 rated when mated.	F39-BT

*1. The F3SG-RA-02TS provides only the monitoring functionality.
*2. When the accessory is used, protect it from cutting oil.

Lamp *

Appearance	Type	仕様	Model
	Lamp	The lamp can be connected to a receiver and turned ON based on the operation of F3SG-RA. The lamp output pattern is set as follows: Red (ON): Inverted signal of safety output information Orange (Blink once): Inverted signal of stable-state information Green (ON): Safety output information IP67 rated when mated.	F39-LP
	Lamp and Bluetooth Communication Unit		F39-BTLP

* When the accessory is used, protect it from cutting oil.

End Cap 1 2

Appearance	Specifications	Model
	Housing color: Black For both emitter and receiver (Attached to the F3SG-RA-02TS. The End Cap can be purchased if lost.) IP67 rated when mated.	F39-CNM

*1. This accessory can also be used with the F3SG-RA-01TS.
*2. When the accessory is used, protect it from cutting oil.

Laser Pointer for F3SG-R *

Appearance	Specifications	Model
	The laser pointer is attached on the optical surface of the F3SG-R to help coarse adjustment of beams.	F39-PTG

* When the accessory is used, protect it from cutting oil.

Test Rod

Diameter	Model
25 mm dia.	F39-TRD25

Specifications| Safety Light Curtain – F3SG-R series series

last update: November 1, 2018

F3SG-RA Advanced type

Main unit

The [][][][] in the model names indicate the protective heights in millimeters.

			F3SG-4RA[][][][]-14 F3SG-2RA[][][][]-14	F3SG-4RA[][][][]-30 F3SG-2RA[][][][]-30
Type of ESPE (IEC 61496-1)		Type 4	F3SG-4RA[][][][]-14/-30
Type of ESPE (IEC 61496-1)		Type 2	F3SG-2RA[][][][]-14/-30
Perfor- mance	Object Resolution (Detection Capability)		Opaque objects
	Object Resolution (Detection Capability)		14-mm dia.	30-mm dia.
	Beam Gap		10 mm	20 mm
	Number of Beams		15 to 207	8 to 124
	Lens Size		5.2 × 3.4 (W × H) mm	7-mm dia.
	Protective Height		160 to 2080 mm (6.3 to 81.9 inch)	190 to 2510 mm (7.3 to 98.7 inch)
	Operating Range	Long	0.3 to 10.0 m (1 to 32 ft.)	0.3 to 20.0 m (1 to 65 ft.)
	Operating Range	Short	0.3 to 3.0 m (1 to 10 ft.)	0.3 to 7.0 m (1 to 23 ft.)
	Response Time	ON to OFF	Normal mode: 8 to 18 ms max. 1 Slow mode: 16 to 36 ms max. 1 *2
		OFF to ON	40 to 90 ms max. *1
		1. Response time when used in one segment system or in cascaded connection. Refer to the one segment system. Refer to Safety Light Curtain F3SG-R Series User’s Manual (ManNo.: Z352) for cascaded connection. 2. Selectable by Configuration Tool.
	Effective Aperture Angle (EAA) (IEC 61496-2)	Type 4	±2.5° max., emitter and receiver at operating range of 3 m or greater
	Effective Aperture Angle (EAA) (IEC 61496-2)	Type 2	±5.0° max., emitter and receiver at operating range of 3 m or greater
	Light Source		Infrared LEDs, Wavelength: 870 nm
	Startup Waiting Time		2 s max.
Elec- trical	Power Supply Voltage (Vs)		SELV/PELV 24 VDC±20% (ripple p-p 10% max.)
	Current Consumption		Refer to “List of Models/Response Time/Current Consumption/Weight”.
	Safety Outputs (OSSD)		Two PNP or NPN transistor outputs (PNP or NPN is selectable by DIP Switch.) Load current of 300 mA max., Residual voltage of 2 V max. (except for voltage drop due to cable extension), Capacitive load of 1 μF max., Inductive load of 2.2 H max. 1 Leakage current of 1 mA max. (PNP), 2 mA max. (NPN) 2 1 The load inductance is the maximum value when the safety output frequently repeats ON and OFF. When you use the safety output at 4 Hz or less, the usable load inductance becomes larger. 2 These values must be taken into consideration when connecting elements including a capacitive load such as a capacitor.
	Auxiliary Output		One PNP or NPN transistor output (PNP or NPN is selectable by DIP Switch.) Load current of 100 mA max., Residual voltage of 2 V max .
	Output Operation Mode	Safety Output	Light-ON (Safety output is enabled when the receiver receives an emitting signal.)
	Output Operation Mode	Auxiliary Output	Safety output (Inverted signal output:Enable) (default) (Cofigurable by Configuration Tool)
	Input Voltage	ON Voltage	TEST: 24 V Active: 9 V to Vs (sink current 3 mA max.) * 0 V Active: 0 to 3 V (source current 3 mA max.) MUTE A/B: PNP: Vs to Vs-3 V (sink current 3 mA max.) * NPN: 0 to 3 V (source current 3 mA max.) RESET: PNP: Vs to Vs-3 V (sink current 5 mA max.) * NPN: 0 to 3 V (source current 5 mA max.)
		OFF Voltage	TEST: 24 V Active: 0 to 1.5 V or open 0 V Active: 9 V to Vs or open MUTE A/B, RESET: PNP: 0 to 1/2 Vs, or open * NPN: 1/2 Vs to Vs, or open *
		* The Vs indicates a supply voltage value in your environment.
	Overvoltage Category (IEC 60664-1)		II
	Indicators		Refer to “Indicator”.
	Protective Circuit		Output short protection, Power supply reverse polarity protection
	Insulation Resistance		20 MΩor higher (500 VDC megger)
	Dielectric Strength		1,000 VAC, 50/60 Hz (1 min)
Func- tional	Mutual Interference Prevention (Scan Code)		This function prevents mutual interference in up to two F3SG-RA systems.
	Cascade Connection		Number of cascaded segments: 3 max. Total number of beams: 255 max. Cable length between sensors: 10 m max. (not including cascading cable (F39-JGR2W) and power cable)
	Test Function		Self-test (at power-on, and during operation) External test (light emission stop function by test input)
	Safety-Related Functions		Interlock External device monitoring (EDM) Pre-reset Fixed blanking/Floating blanking Reduced resolution Muting/Override Scan code selection PNP/NPN selection Response time adjustment
Environ- mental	Ambient Temperature	Operating	-10 to 55°C (14 to 131°F) (non-icing)
	Ambient Temperature	Storage	-25 to 70°C (-13 to 158°F)
	Ambient Humidity	Operating	35% to 85% (non-condensing)
	Ambient Humidity	Storage	35% to 95%
	Ambient Illuminance		Incandescent lamp: 3,000 Ix max. on receiver surface Sunlight: 10,000 Ix max. on receiver surface
	Degree of Protection (IEC 60529)		IP65 and IP67
	Vibration Resistance (IEC 61496-1)		10 to 55 Hz, Multiple amplitude of 0.7 mm, 20 sweeps for all 3 axes
	Shock Resistance (IEC 61496-1)		100 m/s², 1000 shocks for all 3 axes
	Pollution Degree (IEC 60664-1)		Pollution Degree 3
Connec- tions	Power cable	Type of Connection	M12 connectors: 5-pin emitter and 8-pin receiver, IP67 rated when mated, Cables prewired to the sensors
		Number of Wires	Emitter: 5, Receiver: 8
		Cable Length	0.3 m
		Cable Diameter	6 mm
		Minimum Bending Radius	R5 mm
	Cascading cable	Type of Connection	M12 connectors: 5-pin emitter and 8-pin receiver, IP67 rated when mated
		Number of Wires	Emitter: 5, Receiver: 8
		Cable Length	0.2 m
		Cable Diameter	6 mm
		Minimum Bending Radius	R5 mm
	Extension cable – Single- Ended Cable – Double- Ended Cable	Type of Connection	M12 connectors: 5-pin emitter and 8-pin receiver, IP67 rated when mated
		Number of Wires	Emitter: 5, Receiver: 8
		Cable Length	Refer to Lineup.
		Cable Diameter	6.6 mm
		Minimum Bending Radius	R36 mm
	Extension of Power Cable		100 m max.
Material	Material		Housing: Aluminum alloy Cap: PBT resin Front window: Acrylic resin Cable: Oil-resistant PVC resin Standard Fixed Bracket (F39-LGF): Zinc alloy FE plate: Stainless steel
	Weight		Refer to “List of Models/Response Time/Current Consumption/Weight”.
	Included Accessories		Safety Precautions, Quick Installation Manual, Standard Fixed Bracket , Troubleshooting Guide Sticker, Warning Zone Label The quantity of Standard Fixed Brackets included varies depending on the protective height. [F3SG-[]RA[][][][]-14] – Protective height of 0160 to 1200: 2 sets – Protective height of 1280 to 2080: 3 sets [F3SG-[]RA[][][][]-30] – Protective height of 0190 to 1230: 2 sets – Protective height of 1310 to 2270: 3 sets – Protective height of 2350 to 2510: 4 sets
Con- formity	Conforming standards		Refer to “Legislation and Standards”.
	Type of ESPE (IEC 61496-1)		Type 4
	Performance Level (PL)/ Safety category	Type 4	PL e/Category 4 (EN ISO 13849-1:2015)
	Performance Level (PL)/ Safety category	Type 2	PL c/Category 2 (EN ISO 13849-1:2015)
	PFH_D		1.1 × 10^-8 (IEC 61508)
	Proof test interval T_M		Every 20 years (IEC 61508)
	SFF		99% (IEC 61508)
	HFT		1 (IEC 61508)
	Classification		Type B (IEC 61508-2)

Bluetooth Communication Unit

Communication System	Bluetooth Version 3.0
Communication Profile	SPP (Serial Port Profile)
Transmission Distance	Approx. 10 m max. (Output power: Class 2) *

* It depends on use environment conditions.

List of Models/Response Time/Current Consumption/Weight

F3SG-4RA[][][][]-14/F3SG-2RA[][][][]-14

Model		Num- ber of Beams	Pro- tective Height [mm]	Response Time [ms] *1			Current Consumption [mA]		Weight [kg]
Model		Num- ber of Beams	Pro- tective Height [mm]	ON → OFF *2	OFF (Syn- chro- nized) → ON	OFF (Not syn- chro- nized) → ON	Emitter	Re- ceiver	Net *3	Gross *4
F3SG-4RA0160-14	F3SG-2RA0160-14	15	160	8	40	140	40	75	0.7	2.0
F3SG-4RA0240-14	F3SG-2RA0240-14	23	240	8	40	140	45	75	0.9	2.3
F3SG-4RA0320-14	F3SG-2RA0320-14	31	320	8	40	140	55	75	1.1	2.6
F3SG-4RA0400-14	F3SG-2RA0400-14	39	400	8	40	140	60	80	1.3	2.9
F3SG-4RA0480-14	F3SG-2RA0480-14	47	480	13	65	165	50	80	1.5	3.2
F3SG-4RA0560-14	F3SG-2RA0560-14	55	560	13	65	165	55	80	1.7	3.5
F3SG-4RA0640-14	F3SG-2RA0640-14	63	640	13	65	165	60	85	1.9	3.9
F3SG-4RA0720-14	F3SG-2RA0720-14	71	720	13	65	165	65	85	2.1	4.2
F3SG-4RA0800-14	F3SG-2RA0800-14	79	800	13	65	165	65	90	2.3	4.5
F3SG-4RA0880-14	F3SG-2RA0880-14	87	880	13	65	165	70	90	2.6	4.8
F3SG-4RA0960-14	F3SG-2RA0960-14	95	960	13	65	165	75	90	2.8	5.1
F3SG-4RA1040-14	F3SG-2RA1040-14	103	1040	13	65	165	80	95	3.0	5.4
F3SG-4RA1120-14	F3SG-2RA1120-14	111	1120	13	65	165	85	95	3.2	5.7
F3SG-4RA1200-14	F3SG-2RA1200-14	119	1200	13	65	165	90	100	3.4	6.0
F3SG-4RA1280-14	F3SG-2RA1280-14	127	1280	13	65	165	95	100	3.6	6.4
F3SG-4RA1360-14	F3SG-2RA1360-14	135	1360	13	65	165	95	105	3.8	6.7
F3SG-4RA1440-14	F3SG-2RA1440-14	143	1440	18	90	190	85	105	4.0	7.0
F3SG-4RA1520-14	F3SG-2RA1520-14	151	1520	18	90	190	90	105	4.2	7.3
F3SG-4RA1600-14	F3SG-2RA1600-14	159	1600	18	90	190	90	110	4.4	7.6
F3SG-4RA1680-14	F3SG-2RA1680-14	167	1680	18	90	190	95	110	4.7	7.9
F3SG-4RA1760-14	F3SG-2RA1760-14	175	1760	18	90	190	100	115	4.9	8.2
F3SG-4RA1840-14	F3SG-2RA1840-14	183	1840	18	90	190	100	115	5.1	8.5
F3SG-4RA1920-14	F3SG-2RA1920-14	191	1920	18	90	190	105	120	5.3	8.8
F3SG-4RA2000-14	F3SG-2RA2000-14	199	2000	18	90	190	105	120	5.5	9.2
F3SG-4RA2080-14	F3SG-2RA2080-14	207	2080	18	90	190	110	125	5.7	9.5

*1. The maximum speed of movement of a test rod up to which the detection capability is maintained is 2.0 m/s.
*2. The response times are values when Scan Code is set at Code B. The response times for Code A are 1 ms shorter than these values.
*3. The net weight is the weight of an emitter and a receiver.
*4. The gross weight is the weight of an emitter, a receiver, included accessories and a package.

F3SG-4RA[][][][]-30/F3SG-2RA[][][][]-30

Model		Num- ber of Beams	Pro- tective Height [mm]	Response Time [ms] *1			Current Consumption [mA]		Weight [kg]
Model		Num- ber of Beams	Pro- tective Height [mm]	ON → OFF *2	OFF (Syn- chro- nized) → ON	OFF (Not syn- chro- nized) → ON	Emitter	Re- ceiver	Net *3	Gross *4
F3SG-4RA0190-30	F3SG-2RA0190-30	8	190	8	40	140	35	75	0.6	2.1
F3SG-4RA0270-30	F3SG-2RA0270-30	12	270	8	40	140	35	75	0.9	2.4
F3SG-4RA0350-30	F3SG-2RA0350-30	16	350	8	40	140	40	75	1.1	2.7
F3SG-4RA0430-30	F3SG-2RA0430-30	20	430	8	40	140	45	75	1.3	3.0
F3SG-4RA0510-30	F3SG-2RA0510-30	24	510	8	40	140	50	75	1.5	3.3
F3SG-4RA0590-30	F3SG-2RA0590-30	28	590	8	40	140	50	75	1.7	3.6
F3SG-4RA0670-30	F3SG-2RA0670-30	32	670	8	40	140	55	75	1.9	3.9
F3SG-4RA0750-30	F3SG-2RA0750-30	36	750	8	40	140	60	80	2.1	4.2
F3SG-4RA0830-30	F3SG-2RA0830-30	40	830	8	40	140	65	80	2.3	4.5
F3SG-4RA0910-30	F3SG-2RA0910-30	44	910	13	65	165	50	80	2.5	4.8
F3SG-4RA0990-30	F3SG-2RA0990-30	48	990	13	65	165	50	80	2.7	5.1
F3SG-4RA1070-30	F3SG-2RA1070-30	52	1070	13	65	165	55	80	2.9	5.4
F3SG-4RA1150-30	F3SG-2RA1150-30	56	1150	13	65	165	55	85	3.1	5.7
F3SG-4RA1230-30	F3SG-2RA1230-30	60	1230	13	65	165	55	85	3.3	6.0
F3SG-4RA1310-30	F3SG-2RA1310-30	64	1310	13	65	165	60	85	3.5	6.3
F3SG-4RA1390-30	F3SG-2RA1390-30	68	1390	13	65	165	60	85	3.8	6.6
F3SG-4RA1470-30	F3SG-2RA1470-30	72	1470	13	65	165	65	85	4.0	6.9
F3SG-4RA1550-30	F3SG-2RA1550-30	76	1550	13	65	165	65	90	4.2	7.2
F3SG-4RA1630-30	F3SG-2RA1630-30	80	1630	13	65	165	70	90	4.4	7.5
F3SG-4RA1710-30	F3SG-2RA1710-30	84	1710	13	65	165	70	90	4.6	7.8
F3SG-4RA1790-30	F3SG-2RA1790-30	88	1790	13	65	165	70	90	4.8	8.1
F3SG-4RA1870-30	F3SG-2RA1870-30	92	1870	13	65	165	75	90	5.0	8.4
F3SG-4RA1950-30	F3SG-2RA1950-30	96	1950	13	65	165	75	95	5.2	8.7
F3SG-4RA2030-30	F3SG-2RA2030-30	100	2030	13	65	165	80	95	5.4	9.0
F3SG-4RA2110-30	F3SG-2RA2110-30	104	2110	13	65	165	80	95	5.6	9.3
F3SG-4RA2190-30	F3SG-2RA2190-30	108	2190	13	65	165	85	95	5.8	9.6
F3SG-4RA2270-30	F3SG-2RA2270-30	112	2270	13	65	165	85	100	6.0	9.9
F3SG-4RA2350-30	F3SG-2RA2350-30	116	2350	13	65	165	85	100	6.2	10.2
F3SG-4RA2430-30	F3SG-2RA2430-30	120	2430	13	65	165	90	100	6.4	10.5
F3SG-4RA2510-30	F3SG-2RA2510-30	124	2510	13	65	165	90	100	6.7	10.8

Legislation and Standards

1. The F3SG-R does not receive type approval provided by Article 44-2 of the Industrial Safety and Health Act of Japan.
When using the F3SG-R in Japan as a “safety system for pressing or shearing machines” prescribed in Article 42 of
that law, the machine control system must receive type approval. 2. The F3SG-R is electro-sensitive protective equipment (ESPE) in accordance with European Union (EU) Machinery
Directive Index Annex V, Item 2. 3. EC Declaration of Conformity
OMRON declares that the F3SG-R is in conformity with the requirements of the following EC Directives:
Machinery Directive 2006/42/EC
EMC Directive 2014/30/EU 4. Conforming Standards
(1) European standards
EN61496-1 (Type 4 and Type 2 ESPE), EN 61496-2 (Type 4 and Type 2 AOPD), EN61508-1 through -4 (SIL 3 for
Type 4 and SIL 1 for Type 2), EN ISO 13849-1:2015 (PL e, Category 4 for Type 4 and PL c, Category 2 for Type 2)
(2) International standards
IEC61496-1 (Type 4 and Type 2 ESPE), IEC61496-2 (Type 4 and Type 2 AOPD), IEC61508-1 through -4 (SIL 3 for
Type 4 and SIL 1 for Type 2), ISO 13849-1:2015 (PL e, Category 4 for Type 4 and PL c, Category 2 for Type 2)
(3) JIS standards
JIS B 9704-1 (Type 4 and Type 2 ESPE), JIS B 9704-2 (Type 4 and Type 2 AOPD)
(4) North American standards
UL61496-1(Type 4 and Type 2 ESPE), UL61496-2(Type 4 and Type 2 AOPD), UL508, UL1998, CAN/CSA C22.2
No.14, CAN/CSA C22.2 No.0.8
(5) Chinese standards
GB/T 4584(Specification of active opto-electronic protective devices for presses)

5. Third-Party Certifications
(1) TÜV SÜD
• EC Type-Examination certificate:
EU Machinery Directive, Type 4 and Type 2 ESPE (EN61496-1), Type 4 and Type 2 AOPD (EN 61496-2)
• Certificate:
Type 4 and Type 2 ESPE (EN61496-1), Type 4 and Type 2 AOPD (EN61496-2), EN 61508-1 through -4 (SIL 3
for Type 4 and SIL 1 for Type 2), EN ISO 13849-1:2015 (PL e, Category 4 for Type 4, and PL c, Category 2 for
Type 2)
(2) UL
• UL Listing:
Type 4 and Type 2 ESPE (UL61496-1), Type 4 and Type 2 AOPD (UL61496-2), UL508, UL1998, CAN/CSA C22.2
No.14, CAN/CSA C22.2 No.0.8
(3) China National Casting and Forging Machines Quality Supervision and Inspection Center
• Certificate:
GB/T 4584 (Specification of active opto-electronic protective devices for presses)

6. Other Standards
The F3SG-R is designed according to the standards listed below. To make sure that the final system complies with
the following standards and regulations, you are asked to design and use it in accordance with all other related
standards, laws, and regulations. If you have any questions, consult with specialized organizations such as the body
responsible for prescribing and/or enforcing machinery safety regulations in the location where the equipment is to
be used.
• European Standards: EN415-4, EN691-1, EN692, EN693, IEC 62046
• U.S. Occupational Safety and Health Standards: OSHA 29 CFR 1910.212
• U.S. Occupational Safety and Health Standards: OSHA 29 CFR 1910.217
• American National Standards: ANSI B11.1 to B11.19
• American National Standards: ANSI/RIA R15.06
• Canadian Standards Association CSA Z142, Z432, Z434
• SEMI Standards SEMI S2
• Japan Ministry of Health, Labour and Welfare “Guidelines for Comprehensive Safety Standards of Machinery”,
Standard Bureau’s Notification No. 0731001 dated July 31, 2007.rms and Conditions Agreement
• Chinese National Standards: GB17120, GB27607

Indicator

Emitter

Name of Indicator		Color	Illuminated	Blinking
Test	TEST	Green	–	External Test is being performed
Operating range	LONG	Green	Long range mode is selected	Lockout state due to DIP Switch setting error or Operating range selection setting error
Power	POWER	Green	Power is ON.	Error due to noise
Lockout	LOCKOUT	Red	–	Lockout state due to error in emitter

Receiver

Name of Indicator		Color	Illuminated	Blinking
Top-beam-state	TOP	Blue	The top beam is unblocked	Muting/Override state, or Lockout state due to Cap error or Other sensor error
PNP/NPN mode	NPN	Green	NPN mode is selected by DIP Switch	–
Response time	SLOW	Green	Response Time Adjustment is enabled	–
Sequence error	SEQ	Yellow	–	Sequence error in Muting or Pre-reset mode
Blanking	BLANK	Green	Blanking, Warning Zone or Reduced Resolution is enabled	Teach-in mode, or Blanking Monitoring error
Configuration	CFG	Green	–	Teach-in mode, zone measurement beng performed by Dynamic Muting, or Lockout state due to Parameter error or Cascading Configuration error
Interlock	INT-LK	Yellow	Interlock state	Pre-reset mode
External device monitoring	EDM	Green	RESET input is in ON state *	Lockout state due to EDM error
Internal error	INTERNAL	Red	–	Lockout state due to Internal error, or error due to abnormal power supply or noise
Lockout	LOCKOUT	Red	–	Lockout state due to error in receiver
Stable-state	STB	Green	Incident light level is 170% or higher of ON-threshold	Safety output is instantaneously turned OFF due to ambient light or vibration
ON/OFF	ON/OFF	Green	Safety output is in ON state	–
ON/OFF	ON/OFF	Red	Safety output is in OFF state, or the sensor is in Setting state	Lockout state due to Safety Output error, or error due to abnormal power supply or noise
Communication	COM	Green	Synchronization between emitter and receiver is maintained	Lockout state due to Communication error, or error due to abnormal power supply or noise
Bottom-beam- state	BTM	Blue	The bottom beam is unblocked	Muting/Override state, or Lockout state due to DIP Switch setting error

* The LED is illuminated when the EDM input is in ON state regardless of wiring with EDM used or unused.

Interface Unit

Main unit	PC/AT compatible machine (computer that runs Microsoft Windows)
Operating system (OS)	Windows 7 (32-bit/64-bit), Windows 8, 8.1 (32-bit/64-bit), Windows 10 (32-bit/64-bit)
Communication port	USB port ×1
Ambient temperature	Operating: -10 to 55°C, Storage: -30 to 70°C (non-icing and non-condensing)
Ambient humidity	Operating: 35% to 85%, Storage: 35% to 95% (non-condensing)

Lamp

Item	F39-LP
Applicable Sensor	F3SG-[]RA/RR Series Safety Light Curtain (Receiver)
LED Light Color	Red/Orange/Green
Power Supply Voltage	24 VDC±20%, ripple p-p 10% max. (shares sensor’s power supply)
Current Consumption	25 mA max. (shares sensor’s power supply.)
Ambient Temperature	Operating: -10 to 55°C, Storage: -25 to 70°C
Ambient Humidity	Operating: 35% to 85%, Storage: 35% to 95%
Vibration Resistance	10 to 55 Hz, Multiple amplitude of 0.7 mm, 20 sweeps for all 3 axes
Shock Resistance	100 m/s², 1000 shocks for all 3 axes
Degree of Protection	IP65 and IP67 (When attached to F3SG)
Type of Connection	Connectable to F3SG-RA’s terminal connector
Material	Lighting element: PC, Other body parts: PBT
Weight	45 g (when packaged)

F3SG-RR Robust type

Main unit

The [][][][] in the model names indicate the protective heights in millimeters.

			F3SG-4RR[][][][]-14	F3SG-4RR[][][][]-25
Perfor- mance	Object Resolution (Detection Capability)		Opaque objects
	Object Resolution (Detection Capability)		14-mm dia.	25-mm dia.
	Beam Gap		10 mm	20 mm
	Number of Beams		23 to 191	12 to 96
	Lens Size		5.2 × 3.4 (W × H) mm	6.0 × 5.0 (W × H) mm
	Protective Height		240 to 1920 mm
	Operating Range		0.3 to 10.0 m	0.3 to 17.0 m
	Response Time	ON to OFF	Normal mode: 8 to 18 ms 1 Slow mode: 16 to 36 ms 1 *2
		OFF to ON	Normal mode: 40 to 90ms (synchronized), 140 to 190ms (not synchronized) *1
		1. Response time when used in one segment system or in cascaded connection. Refer to “List of Models/Response Time/Current Consumption/Weight”. 2. Selectable by Configuration Tool.
	Effective Aperture Angle (EAA) (IEC 61496-2)		±2.5° max., emitter and receiver at operating range of 3 m or greater
	Light Source		Infrared LEDs, Wavelength: 870 nm
	Startup Waiting Time		2 s max.
Electrical	Power Supply Voltage (Vs)		SELV/PELV 24 VDC±20% (ripple p-p 10% max.)
	Current Consumption		Refer to “List of Models/Response Time/Current Consumption/Weight”.
	Safety Outputs (OSSD)		Two PNP or NPN transistor outputs (PNP or NPN is selectable by Configuration Tool.)
	Safety Outputs (OSSD)		Load current of 300 mA max., Residual voltage of 2 V max. (except for voltage drop due to cable extension), Capacitive load of 1 μF max., Inductive load of 2.2 H max. 1 Leakage current of 1 mA max. (PNP), 2 mA max. (NPN) 2 1. The load inductance is the maximum value when the safety output frequently repeats ON and OFF. When you use the safety output at 4 Hz or less, the usable load inductance becomes larger. 2. These values must be taken into consideration when connecting elements including a capacitive load such as a capacitor.
	Auxiliary Output		One PNP or NPN transistor output (PNP or NPN is selectable by Configuration Tool.)
	Auxiliary Output		Load current of 100 mA max., Residual voltage of 2 V max .
	Output Operation Mode	Safety Output	Light-ON (Safety output is enabled when the receiver receives an emitting signal.)
	Output Operation Mode	Auxiliary Output	Safety output (Inverted signal output:Enable) (default) (Cofigurable by Configuration Tool)
	Input Voltage	External device monitoring input (Lockout reset input)	PNP ON voltage: Vs-3 V to Vs (short circuit current: approx. 6.5 mA) * OFF voltage: 0 V to 1/2 Vs, or open (short circuit current: approx. 8.0 mA) * NPN ON voltage: 0 V to 3 V (short circuit current: approx. 8.0 mA) OFF voltage: 1/2 Vs to Vs, or open (short circuit current: approx. 6.5 mA) *
		Muting input A/B	PNP ON voltage: Vs-3 V to Vs (short circuit current: approx. 3.0 mA) * OFF voltage: 0 V to 1/2 Vs, or open (short circuit current: approx. 5.0 mA) * NPN ON voltage: 0 V to 3 V (short circuit current: approx. 5.0 mA) OFF voltage: 1/2 Vs to Vs, or open (short circuit current: approx. 3.0 mA) *
		Test input	24 V Active setting: ON voltage: 9 V to Vs (short circuit current: approx. 2.5 mA) * OFF voltage: 0 V to 1.5 V or open (short circuit current: approx. 2.0 mA) 0 V Active setting: ON voltage: 0 V to 3 V (short circuit current: approx. 2.0 mA) OFF voltage: 9 V to Vs or open (short circuit current: approx. 2.5 mA) *
		* The Vs indicates a supply voltage value in your environment.
	Overvoltage Category (IEC 60664-1)		II
	Indicators		Refer to “Indicator”.
	Protective Circuit		Output short protection, Power supply reverse polarity protection
	Insulation Resistance		20 MΩ or higher (500 VDC megger)
	Dielectric Strength		1,000 VAC, 50/60 Hz (1 min)
Func- tional	Mutual Interference Prevention (Scan Code)		This function prevents mutual interference in up to two F3SG-RR systems.
	Cascade Connection		Number of cascaded segments: 3 max.
	Cascade Connection		Total number of beams: 255 max. Cable length between sensors: 10 m max. (not including cascading cable (F39-JGR2WTS) and power cable)
	Test Function		Self-test (at power-on, and during operation) External test (light emission stop function by test input)
	Safety-Related Functions		Interlock External device monitoring (EDM) Pre-reset Fixed blanking/Floating blanking Reduced resolution Muting/Override Scan code selection PNP/NPN selection Response time adjustment
Environ- mental	Ambient Temperature	Operating	-10 to 55°C (14 to 131°F) (non-icing)
	Ambient Temperature	Storage	-25 to 70°C (-13 to 158°F)
	Ambient Humidity	Operating	35% to 85% (non-condensing)
	Ambient Humidity	Storage	35% to 95%
	Ambient Illuminance		Incandescent lamp: 3,000 Ix max. on receiver surface Sunlight: 10,000 Ix max. on receiver surface
	Degree of Protection (IEC 60529)		IEC 60529: IP65 and IP67, JIS C 0920 Annex 1: IP67G
	Vibration Resistance (IEC 61496-1)		10 to 55 Hz, Multiple amplitude of 0.7 mm, 20 sweeps for all 3 axes
	Shock Resistance (IEC 61496-1)		100 m/s², 1000 shocks for all 3 axes
	Pollution Degree (IEC 60664-1)		Pollution Degree 3
Connec- tions	Power cable	Type of Connection	M12 connectors: 8-pin emitter and receiver. Cables prewired to the sensors. IP67 and IP67G (JIS C 0920 Annex 1) * rated when mated. *F3SG-RR meets the degree of protection when it is correctly connected with an F39-JD[][]RA-[] Oil-Resistant cable.
		Number of Wires	Emitter: 5, Receiver: 8
		Cable Length	0.3 m
		Cable Diameter	6 mm
		Minimum Bending Radius	R36 mm
	Cascading cable	Type of Connection	M12 connectors: 8-pin emitter and receiver. IP67 rated when mated.
		Number of Wires	Emitter: 5, Receiver: 8
		Cable Length	0.3 m
		Cable Diameter	6 mm
		Minimum Bending Radius	R5 mm
	F39-JD[]RA-[] Oil-Resistant cable – Single- Ended Cable	Type of Connection	M12 connectors: 8-pin emitter and receiver. Cables prewired to the sensors. IP67 and IP67G (JIS C 0920 Annex 1)* rated when mated. * F3SG-RR meets the degree of protection when it is correctly connected with the power cable. The degree of protection is not satisfied with the part where cable wires are uncovered.
		Number of Wires	Emitter: 5, Receiver: 8
		Cable Length	Refer to Lineup.
		Cable Diameter	6 mm
		Minimum Bending Radius	R36 mm
	Extension cable – Single- Ended Cable (F39-JD[]A) – Double- Ended Cable (F39-JD[]B)	Type of Connection	M12 connectors: 8-pin emitter and receiver. IP67 rated when mated.
		Number of Wires	Emitter: 8, Receiver: 8
		Cable Length	Refer to Lineup.
		Cable Diameter	6.6 mm
		Minimum Bending Radius	R36 mm
	Extension of Power Cable		100 m max. (Emitter/Receiver)
Material	Material		Housing: Aluminum alloy Cap: PBT resin Front window: Acrylic resin Cable: Fluororesin FE plate: Stainless steel
	Weight		Refer to “List of Models/Response Time/Current Consumption/Weight”.
	Included Accessories		Safety Precautions, Quick Installation Manual, Troubleshooting Guide Sticker, Warning Zone Label, End Cap (for switching External Test Input function)
Conformity	Conforming standards		Refer to “Legislation and Standards”.
	Performance Level (PL) / Safety category		PL e/Category 4 (EN ISO 13849-1:2015)
	PFH_D		1.1 × 10^-8 (IEC 61508)
	Proof test interval T_M		Every 20 years (IEC 61508)
	SFF		99% (IEC 61508)
	HFT		1 (IEC 61508)
	Classification		Type B (IEC 61508-2)

Bluetooth Communication Unit

Communication System	Bluetooth Version 3.0
Communication Profile	SPP (Serial Port Profile)
Transmission Distance	Approx. 10 m max. (Output power: Class 2) *

* It depends on use environment conditions.

List of Models/Response Time/Current Consumption/Weight

F3SG-4RR[][][][]-14

Model	Num- ber of Beams	Pro- tective Height [mm] (Overall length)	Response Time [ms] *1			Current Consumption [mA]		Weight [kg]
Model	Num- ber of Beams	Pro- tective Height [mm] (Overall length)	ON → OFF *2	OFF (Syn- chro- nized) → ON	OFF (Not syn- chro- nized) → ON	Emitter	Re- ceiver	Net *3	Gross *4
F3SG-4RR0240-14	23	240	8	40	140	45	75	0.7	1.5
F3SG-4RR0320-14	31	320	8	40	140	55	75	0.9	1.7
F3SG-4RR0400-14	39	400	8	40	140	60	80	1.1	2.0
F3SG-4RR0480-14	47	480	13	65	165	50	80	1.3	2.3
F3SG-4RR0560-14	55	560	13	65	165	55	80	1.5	2.5
F3SG-4RR0640-14	63	640	13	65	165	60	85	1.7	2.8
F3SG-4RR0720-14	71	720	13	65	165	65	85	1.9	3.1
F3SG-4RR0800-14	79	800	13	65	165	65	90	2.1	3.4
F3SG-4RR0880-14	87	880	13	65	165	70	90	2.4	3.6
F3SG-4RR0960-14	95	960	13	65	165	75	90	2.6	3.9
F3SG-4RR1040-14	103	1040	13	65	165	80	95	2.8	4.2
F3SG-4RR1120-14	111	1120	13	65	165	85	95	3.0	4.4
F3SG-4RR1200-14	119	1200	13	65	165	90	100	3.2	4.7
F3SG-4RR1280-14	127	1280	13	65	165	95	100	3.4	5.0
F3SG-4RR1360-14	135	1360	13	65	165	95	105	3.6	5.3
F3SG-4RR1440-14	143	1440	18	90	190	85	105	3.8	5.5
F3SG-4RR1520-14	151	1520	18	90	190	90	105	4.0	5.8
F3SG-4RR1600-14	159	1600	18	90	190	90	110	4.2	6.1
F3SG-4RR1680-14	167	1680	18	90	190	95	110	4.4	6.3
F3SG-4RR1760-14	175	1760	18	90	190	100	115	4.6	6.6
F3SG-4RR1840-14	183	1840	18	90	190	100	115	4.8	6.9
F3SG-4RR1920-14	191	1920	18	90	190	105	120	5.0	7.2

*1. The maximum speed of movement of a test rod up to which the detection capability is maintained is 2.0 m/s.
*2. The response times are values when Scan Code is set at Code B. The response times for Code A are 1 ms shorter than these values.
*3. The net weight is the weight of an emitter and a receiver.
*4. The gross weight is the weight of an emitter, a receiver, included accessories and a package.

F3SG-4RR[][][][]-25

Model	Num- ber of Beams	Pro- tective Height [mm] (Overall length)	Response Time [ms] *1			Current Consumption [mA]		Weight [kg]
Model	Num- ber of Beams	Pro- tective Height [mm] (Overall length)	ON → OFF *2	OFF (Syn- chro- nized) → ON	OFF (Not syn- chro- nized) → ON	Emitter	Re- ceiver	Net *3	Gross *4
F3SG-4RR0240-25	12	240	8	40	140	35	75	0.7	1.6
F3SG-4RR0320-25	16	320	8	40	140	40	75	0.9	1.9
F3SG-4RR0400-25	20	400	8	40	140	45	75	1.1	2.1
F3SG-4RR0480-25	24	480	8	40	140	50	75	1.3	2.4
F3SG-4RR0560-25	28	560	8	40	140	50	75	1.5	2.7
F3SG-4RR0640-25	32	640	8	40	140	55	75	1.7	3.0
F3SG-4RR0720-25	36	720	8	40	140	60	80	1.9	3.2
F3SG-4RR0800-25	40	800	8	40	140	65	80	2.1	3.5
F3SG-4RR0880-25	44	880	13	65	165	50	80	2.3	3.8
F3SG-4RR0960-25	48	960	13	65	165	50	80	2.5	4.0
F3SG-4RR1040-25	52	1040	13	65	165	55	80	2.7	4.3
F3SG-4RR1120-25	56	1120	13	65	165	55	85	2.9	4.6
F3SG-4RR1200-25	60	1200	13	65	165	55	85	3.1	4.9
F3SG-4RR1280-25	64	1280	13	65	165	60	85	3.3	5.1
F3SG-4RR1360-25	68	1360	13	65	165	60	85	3.5	5.4
F3SG-4RR1440-25	72	1440	13	65	165	65	85	3.7	5.7
F3SG-4RR1520-25	76	1520	13	65	165	65	90	3.9	5.9
F3SG-4RR1600-25	80	1600	13	65	165	70	90	4.1	6.2
F3SG-4RR1680-25	84	1680	13	65	165	70	90	4.3	6.5
F3SG-4RR1760-25	88	1760	13	65	165	70	90	4.5	6.7
F3SG-4RR1840-25	92	1840	13	65	165	75	90	4.7	7.0
F3SG-4RR1920-25	96	1920	13	65	165	75	95	4.9	7.3

Legislation and Standards

1. The F3SG-RR does not receive type approval provided by Article 44-2 of the Industrial Safety and Health Act of Japan.
When using the F3SG-RR in Japan as a “safety system for pressing or shearing machines” prescribed in Article 42 of
that law, the machine control system must receive type approval.

2. The F3SG-RR is electro-sensitive protective equipment (ESPE) in accordance with European Union (EU) Machinery
Directive Index Annex V, Item 2.

3. EC/EU Declaration of Conformity
OMRON declares that the F3SG-RR is in conformity with the requirements of the following EC/EU Directives:
Machinery Directive 2006/42/EC
EMC Directive 2014/30/EU

4. Conforming Standards
(1) European standards
EN61496-1 (Type 4 ESPE), EN 61496-2 (Type 4 AOPD), EN61508-1 through -4 (SIL 3), EN ISO 13849-1:2015
(PL e, Category 4)
(2) International standards
IEC61496-1 (Type 4 ESPE), IEC61496-2 (Type 4 AOPD), IEC61508-1 through -4 (SIL 3), ISO 13849-1:2015
(PL e, Category 4)
(3) JIS standards
JIS B 9704-1 (Type 4 ESPE), JIS B 9704-2 (Type 4 AOPD)
(4) North American standards
UL61496-1 (Type 4 ESPE), UL61496-2 (Type 4 AOPD), UL508, UL1998,
CAN/CSA C22.2 No.14, CAN/CSA C22.2 No.0.8

5. Third-Party Certifications
(1) TÜV SÜD
• EC Type-Examination certificate:
EU Machinery Directive, Type 4 ESPE (EN61496-1), Type 4 AOPD (EN 61496-2)
• Certificate:
Type 4 ESPE (EN61496-1), Type 4 AOPD (EN61496-2), EN 61508-1 through -4 (SIL 3), EN ISO 13849-1:2015
(PL e, Category 4)
(2) UL
• UL Listing:
Type 4 and ESPE (UL61496-1), Type 4 AOPD (UL61496-2), UL508, UL1998, CAN/CSA C22.2 No.14,
CAN/CSA C22.2 No.0.8

6. Other Standards
The F3SG-RR is designed according to the standards listed below. To make sure that the final system complies with the
following standards and regulations, you are asked to design and use it in accordance with all other related standards,
laws, and regulations. If you have any questions, consult with specialized organizations such as the body responsible
for prescribing and/or enforcing machinery safety regulations in the location where the equipment is to be used.
• European Standards: EN415-4, EN691-1, EN692, EN693, IEC 62046
• U.S. Occupational Safety and Health Standards: OSHA 29 CFR 1910.212
• U.S. Occupational Safety and Health Standards: OSHA 29 CFR 1910.217
• American National Standards: ANSI B11.1 to B11.19
• American National Standards: ANSI/RIA R15.06
• Canadian Standards Association CSA Z142, Z432, Z434
• SEMI Standards SEMI S2
• Japan Ministry of Health, Labour and Welfare “Guidelines for Comprehensive Safety Standards of Machinery”,
Standard Bureau’s Notification
No. 0731001 dated July 31, 2007.rms and Conditions Agreement

Indicator

Emitter

Name of Indicator		Color	Illuminated	Blinking
Test	TEST	Green	–	External Test is being performed
Operating range	LONG	Green	Always illuminated	Lockout state due to Scan code setting error
Power	POWER	Green	Power is ON.	Error due to noise
Lockout	LOCKOUT	Red	–	Lockout state due to error in emitter

Receiver

Name of Indicator		Color	Illuminated	Blinking
Top-beam-state	TOP	Blue	The top beam is unblocked	Muting/Override state, or Lockout state due to Cap error or Other sensor error
PNP/NPN mode	NPN	Green	NPN mode is selected	–
Response time	SLOW	Green	Response Time Adjustment is enabled	–
Sequence error	SEQ	Yellow	–	Sequence error in Muting or Pre-reset mode
Blanking	BLANK	Green	Blanking, Warning Zone or Reduced Resolution is enabled	Blanking Monitoring error
Configuration	CFG	Green	–	Zone measurement being performed by Dynamic Muting, or Lockout state due to Parameter error or Cascading Configuration error
Interlock	INT-LK	Yellow	Interlock state	Pre-reset mode *2
External device monitoring	EDM	Green	RESET input is in ON state *1	Lockout state due to EDM error
Internal error	INTERNAL	Red	–	Lockout state due to Internal error, or error due to abnormal power supply or noise
Lockout	LOCKOUT	Red	–	Lockout state due to error in receiver
Stable-state	STB	Green	Incident light level is 170% or higher of ON-threshold	Safety output is instantaneously turned OFF due to ambient light or vibration
ON/OFF	ON/OFF	Green	Safety output is in ON state	–
ON/OFF	ON/OFF	Red	Safety output is in OFF state	Lockout state due to Safety Output error, or error due to abnormal power supply or noise
Communication	COM	Green	Synchronization between emitter and receiver is maintained	Lockout state due to Communication error, or error due to abnormal power supply or noise
Bottom-beam-state	BTM	Blue	The bottom beam is unblocked	Muting/Override state, or Lockout state due to Scan code setting error

Note: TOP, CFG, LOCKOUT, STB and ON/OFF indicators are illuminated when the receiver of the F3SG-RR is in Setting mode.
*1. The EDM indicator is illuminated when the EDM input is in the ON state regardless of the use of the EDM function.
*2. Refer to Safety Light Curtain F3SG-[]RR Series User’s Manual (ManNo.: Z383) for more information of blinking patterns.

Interface Unit

Main Unit	PC/AT compatible machine (computer that runs Microsoft Windows)
Operating System (OS)	Windows 7 (32-bit/64-bit), Windows 8, 8.1 (32-bit/64-bit), Windows 10 (32-bit/64-bit)
Communication Port	USB port ×1
Ambient Temperature	Operating: -10 to 55°C, Storage: -30 to 70°C (non-icing and non-condensing)
Ambient Humidity	Operating: 35% to 85%, Storage: 35% to 95% (non-condensing)

Lamp

Item	F39-LP
Applicable Sensor	F3SG-[]RA/RR Series Safety Light Curtain (Receiver)
LED Light Color	Red/Green/Orange
Power Supply Voltage	24 VDC±20%, ripple p-p 10% max. (shares sensor’s power supply)
Current Consumption	25 mA max. (shares sensor’s power supply.)
Ambient Temperature	Operating: -10 to 55°C, Storage: -25 to 70°C
Ambient Humidity	Operating: 35% to 85%, Storage: 35% to 95%
Vibration Resistance	10 to 55 Hz, Multiple amplitude of 0.7 mm, 20 sweeps for all 3 axes
Shock Resistance	100 m/s² , 1000 shocks for all 3 axes
Degree of Protection	IP65 and IP67 (When attached to F3SG)
Type of Connection	Connectable to F3SG-RA/RR’s terminal connector
Material	Lighting element: PC, Other body parts: PBT
Weight	45 g (when packaged)

F3SG-RE Easy type

Main unit

The [][][][] in the model names indicate the protective heights in millimeters.

			F3SG-4RE[][][][]-14 F3SG-2RE[][][][]-14	F3SG-4RE[][][][]-30 F3SG-2RE[][][][]-30
Perform- ance	Type of ESPE (IEC 61496-1)	Type 4	F3SG-4RE[][][][][]14/30
	Type of ESPE (IEC 61496-1)	Type 2	F3SG-2RE[][][][][]14/30
	Object Resolution (Detection Capability)		Opaque objects
	Object Resolution (Detection Capability)		14-mm dia.	30-mm dia.
	Beam Gap		10 mm	20 mm
	Number of Beams		15 to 207	8 to 124
	Lens Size		5.2 × 3.4 (W × H) mm	7-mm dia.
	Protective Height		160 to 2080 mm (6.3 to 81.9 inch)	190 to 2510 mm (7.3 to 98.7 inch)
	Operating Range	Long	0.3 to 10.0 m (1 to 32 ft.)	0.3 to 20.0 m (1 to 65 ft.)
	Operating Range	Short	0.3 to 3.0 m (1 to 10 ft.)	0.3 to 7.0 m (1 to 23 ft.)
	Response Time	ON to OFF	5 to 15 ms *1
		OFF to ON	25 to 75 ms *1
		*1.Response time when used in one segment system Refer to “List of Models/Response Time/Current Consumption/Weight”
	Effective Aperture Angle (EAA) (IEC 61496-2)	Type 4	±2.5° max., emitter and receiver at operating range of 3 m or greater
	Effective Aperture Angle (EAA) (IEC 61496-2)	Type 2	±5.0° max., emitter and receiver at operating range of 3 m or greater
	Light Source		Infrared LEDs, Wavelength: 870 nm
	Startup Waiting Time		2 s max.
Elec- tricall	Power Supply Voltage (Vs)		SELV/PELV 24 VDC±20% (ripple p-p 10% max.)
	Current Consumption		Refer to “List of Models/Response Time/Current Consumption/Weight”.
	Safety Outputs (OSSD)		F3SG-[]RE[][][][]P[][]: Two PNP transistor outputs F3SG-[]RE[][][][]N[][]: Two NPN transistor outputs
	Safety Outputs (OSSD)		Load current of 300 mA max., Residual voltage of 2 V max. (except for voltage drop due to cable extension), Capacitive load of 1 μF max., Inductive load of 2.2 H max. 1 Leakage current of 1 mA max. (PNP), 2 mA max. (NPN) 2 1.The load inductance is the maximum value when the safety output frequently repeats ON and OFF. When you use the safety output at 4 Hz or less, the usable load inductance becomes larger. 2. These values must be taken into consideration when connecting elements including a capacitive load such as a capacitor.
	Output Operation Mode	Safety Output	Light-ON (Safety output is enabled when the receiver receives an emitting signal.)
	Input Voltage	ON Voltage	Operating Range Select Input: Long: 9 V to Vs (sink current 3 mA max.) * Short: 0 to 3 V (source current 3 mA max.)
		OFF Voltage
		*The Vs indicates a supply voltage value in your environment.
	Overvoltage Category (IEC60664-1)		II
	Indicators		Refer to “LED Indicator Status”.
	Protective Circuit		Output short protection, Power supply reverse polarity protection
	Insulation Resistance		20 MΩor higher (500 VDC megger)
	Dielectric Strength		1,000 VAC, 50/60 Hz (1 min)
Func- tional	Test Function		Self-test (at power-on, and during operation)
Environ- mental	Ambient Temperature	Operating	-10 to 55°C (14 to 131°F) (non-icing)
	Ambient Temperature	Storage	-25 to 70°C (-13 to 158°F)
	Ambient Humidity	Operating	35% to 85% (non-condensing)
	Ambient Humidity	Storage	35% to 95%
	Ambient Illuminance		Incandescent lamp: 3,000 Ix max. on receiver surface Sunlight: 10,000 Ix max. on receiver surface
	Degree of Protection (IEC 60529)		IP65 and IP67
	Vibration Resistance (IEC 61496-1)		10 to 55 Hz, Multiple amplitude of 0.7 mm, 20 sweeps for all 3 axes
	Shock Resistance (IEC 61496-1)		100 m/s², 1000 shocks for all 3 axes
	Pollution Degree (IEC 60664-1)		Pollution Degree 3
Connec- tions	Power cable	Type of Connection	M12 connectors: 4-pin, IP67 rated when mated,Cables prewired to the sensors
		Number of Wires	Emitter: 4, Receiver: 4
		Cable Length	0.3 m
		Cable Diameter	6 mm
		Minimum Bending Radius	R5 mm
	Extension cable – Single- Ended Cable – Double- Ended Cable	Type of Connection	Use the XS5[]-D42[] series cables.
		Number of Wires
		Cable Length
		Cable Diameter
		Minimum Bending Radius
	Extension of Power Cable		100 m max.
Material	Material		Housing: Aluminum alloy Cap: PBT resin Front window: Acrylic resin Cable: Oil-resistant PVC resin Standard Fixed Bracket (F39-LGF): Zinc alloy FE plate: Stainless steel
	Weight		Refer to “List of Models/Response Time/Current Consumption/Weight”.
	Included Accessories		Safety Precautions, Quick Installation Manual, Standard Fixed Bracket1, Troubleshooting Guide Sticker 1. The quantity of Standard Fixed Brackets included varies depending on the protective height. [F3SG-[]RE[][][][][]14] – Protective height of 0160 to 1200: 2 sets – Protective height of 1280 to 2080: 3 sets [F3SG-[]RE[][][][][]30] – Protective height of 0190 to 1230: 2 sets – Protective height of 1310 to 2270: 3 sets – Protective height of 2350 to 2510: 4 sets
Con- formity	Conforming standards		Refer to “Legislation and Standards”.
	Performance Level (PL)/ Safety category	Type 4	PL e/Category 4 (EN ISO 13849-1:2015)
	Performance Level (PL)/ Safety category	Type 2	PL c/Category 2 (EN ISO 13849-1:2015)
	PFH_D		9.1 × 10^-9 (IEC 61508)
	Proof test interval T_M		Every 20 years (IEC 61508)
	SFF		99% (IEC 61508)
	HFT		1 (IEC 61508)
	Classification		Type B (IEC 61508-2)

List of Models/Response Time/Current Consumption/Weight

F3SG-[]RE[][][][][]-14

Model	Number of Beams	Protective Height [mm]	Response Time [ms] *1			Current Consumption [mA]		Weight [kg]
Model	Number of Beams	Protective Height [mm]	ON → OFF	OFF (Syn- chronized) → ON	OFF (Not syn- chronized) → ON	Emitter	Receiver	Net *2	Gross *3
F3SG-[]RE0160[]14	15	160	5	25	125	45	50	0.6	1.9
F3SG-[]RE0240[]14	23	240	5	25	125	55	55	0.8	2.2
F3SG-[]RE0320[]14	31	320	7	35	135	55	55	1.0	2.5
F3SG-[]RE0400[]14	39	400	7	35	135	65	60	1.2	2.9
F3SG-[]RE0480[]14	47	480	7	35	135	70	60	1.4	3.2
F3SG-[]RE0560[]14	55	560	7	35	135	80	60	1.6	3.5
F3SG-[]RE0640[]14	63	640	7	35	135	85	65	1.9	3.8
F3SG-[]RE0720[]14	71	720	9	45	145	80	65	2.1	4.1
F3SG-[]RE0800[]14	79	800	9	45	145	85	70	2.3	4.4
F3SG-[]RE0880[]14	87	880	9	45	145	90	70	2.5	4.7
F3SG-[]RE0960[]14	95	960	9	45	145	95	75	2.7	5.0
F3SG-[]RE1040[]14	103	1040	9	45	145	100	75	2.9	5.4
F3SG-[]RE1120[]14	111	1120	11	55	155	90	75	3.1	5.7
F3SG-[]RE1200[]14	119	1200	11	55	155	95	80	3.3	6.0
F3SG-[]RE1280[]14	127	1280	11	55	155	100	80	3.5	6.3
F3SG-[]RE1360[]14	135	1360	11	55	155	105	85	3.7	6.6
F3SG-[]RE1440[]14	143	1440	11	55	155	110	85	3.9	6.9
F3SG-[]RE1520[]14	151	1520	13	65	165	100	90	4.1	7.2
F3SG-[]RE1600[]14	159	1600	13	65	165	105	90	4.4	7.5
F3SG-[]RE1680[]14	167	1680	13	65	165	110	95	4.6	7.9
F3SG-[]RE1760[]14	175	1760	13	65	165	115	95	4.8	8.2
F3SG-[]RE1840[]14	183	1840	13	65	165	115	95	5.0	8.5
F3SG-[]RE1920[]14	191	1920	15	75	175	110	100	5.2	8.8
F3SG-[]RE2000[]14	199	2000	15	75	175	115	100	5.4	9.1
F3SG-[]RE2080[]14	207	2080	15	75	175	115	105	5.6	9.4

*1. The maximum speed of movement of a test rod up to which the detection capability is maintained is 2.0 m/s.
*2. The net weight is the weight of an emitter and a receiver.
*3. The gross weight is the weight of an emitter, a receiver, included accessories and a package.

F3SG-[]RE[][][][][]30

Model	Number of Beams	Protective Height [mm]	Response Time [ms] *1			Current Consumption [mA]		Weight [kg]
Model	Number of Beams	Protective Height [mm]	ON → OFF	OFF (Syn- chronized) → ON	OFF (Not syn- chronized) → ON	Emitter	Receiver	Net *2	Gross *3
F3SG-[]RE0190[]30	8	190	5	25	125	40	50	0.6	2.0
F3SG-[]RE0270[]30	12	270	5	25	125	45	50	0.8	2.3
F3SG-[]RE0350[]30	16	350	5	25	125	50	50	1.0	2.6
F3SG-[]RE0430[]30	20	430	5	25	125	55	55	1.2	2.9
F3SG-[]RE0510[]30	24	510	5	25	125	60	55	1.4	3.2
F3SG-[]RE0590[]30	28	590	7	35	135	50	55	1.6	3.5
F3SG-[]RE0670[]30	32	670	7	35	135	55	55	1.8	3.8
F3SG-[]RE0750[]30	36	750	7	35	135	60	60	2.0	4.1
F3SG-[]RE0830[]30	40	830	7	35	135	65	60	2.2	4.4
F3SG-[]RE0910[]30	44	910	7	35	135	65	60	2.4	4.7
F3SG-[]RE0990[]30	48	990	7	35	135	70	60	2.6	5.0
F3SG-[]RE1070[]30	52	1070	7	35	135	75	60	2.8	5.3
F3SG-[]RE1150[]30	56	1150	7	35	135	80	65	3.0	5.6
F3SG-[]RE1230[]30	60	1230	7	35	135	85	65	3.3	5.9
F3SG-[]RE1310[]30	64	1310	7	35	135	85	65	3.5	6.2
F3SG-[]RE1390[]30	68	1390	9	45	145	75	65	3.7	6.5
F3SG-[]RE1470[]30	72	1470	9	45	145	80	65	3.9	6.8
F3SG-[]RE1550[]30	76	1550	9	45	145	80	70	4.1	7.1
F3SG-[]RE1630[]30	80	1630	9	45	145	85	70	4.3	7.4
F3SG-[]RE1710[]30	84	1710	9	45	145	85	70	4.5	7.7
F3SG-[]RE1790[]30	88	1790	9	45	145	90	70	4.7	8.0
F3SG-[]RE1870[]30	92	1870	9	45	145	95	75	4.9	8.3
F3SG-[]RE1950[]30	96	1950	9	45	145	95	75	5.1	8.6
F3SG-[]RE2030[]30	100	2030	9	45	145	100	75	5.3	8.9
F3SG-[]RE2110[]30	104	2110	9	45	145	100	75	5.5	9.2
F3SG-[]RE2190[]30	108	2190	11	55	155	90	75	5.7	9.5
F3SG-[]RE2270[]30	112	2270	11	55	155	95	80	5.9	9.8
F3SG-[]RE2350[]30	116	2350	11	55	155	95	80	6.1	10.1
F3SG-[]RE2430[]30	120	2430	11	55	155	95	80	6.3	10.4
F3SG-[]RE2510[]30	124	2510	11	55	155	100	80	6.5	10.7

LED Indicator Status

Emitter

Name of Indicator		Color	Illuminated	Blinking
Operating range	LONG	Green	Long range mode is selected	Lockout state due to Operating range selection setting error
Power	POWER	Green	Power is ON.	Error due to noise
Lockout	LOCKOUT	Red	–	Lockout state due to error in emitter

Receiver

Name of Indicator		Color	Illuminated	Blinking
Top-beam-state	TOP	Blue	The top beam is unblocked	–
Internal error	INTERNAL	Red	–	Lockout state due to Internal error, or error due to abnormal power supply or noise
Lockout	LOCKOUT	Red	–	Lockout state due to error in receiver
Stable-state	STB	Green	Incident light level is 170% or higher of ON threshold	Safety output is instantaneously turned OFF due to ambient light or vibration
ON/OFF	ON/OFF	Green	Safety output is in ON state	–
ON/OFF	ON/OFF	Red	Safety output is in OFF state	Lockout state due to Safety Output error, or error due to abnormal power supply or noise
Communication	COM	Green	Synchronization between emitter and receiver is maintained	Lockout state due to Communication error, or error due to abnormal power supply or noise
Bottom-beam- state	BTM	Blue	The bottom beam is unblocked	–

F3SG-RA-01TS

Main unit

The [][][][] in the model names indicate the protective heights in millimeters.

			F3SG-4RA[][][][]-25-01TS
Perform- ance	Object Resolution (Detection Capability)		Opaque objects
	Object Resolution (Detection Capability)		25-mm dia.
	Beam Gap		20 mm
	Number of Beams		8 to 96
	Lens Size		6.0×5.0 (W×H) mm
	Protective Height		185 to 1945 mm (7.3 to 76.6 inch)
	Operating Range	Long	0.3 to 17.0 m (1 to 56 ft.)
	Operating Range	Short	0.3 to 5.0 m (1 to 16 ft.)
	Response Time	ON to OFF	8 to 13 ms *1
		OFF to ON	40 to 65ms *1
		*1.Response time when used in one segment system or in cascaded connection. Refer to the one segment system. Refer to Safety Light Curtain F3SG-4RA[][][][]-25-01TS Series User’s Manual (ManNo.: Z380) for cascaded connection
	Effective Aperture Angle (EAA) (IEC 61496-2)	Type 4	±2.5° max., emitter and receiver at operating range of 3 m or greater
	Light Source		Infrared LEDs, Wavelength: 870 nm
	Startup Waiting Time		2 s max.
Elec- trical	Power Supply Voltage (Vs)		SELV/PELV 24 VDC±20% (ripple p-p 10% max.)
	Current Consumption		Refer to “List of Models/Response Time/Current Consumption/Weight”.
	Safety Outputs (OSSD)		Two PNP or NPN transistor outputs (PNP or NPN is selectable by DIP Switch.)
	Safety Outputs (OSSD)		Load current of 300 mA max., Residual voltage of 2 V max. (except for voltage drop due to cable extension), Capacitive load of 1 μF max., Inductive load of 2.2 H max. 1 Leakage current of 1 mA max. (PNP), 2 mA max. (NPN) 21.The load inductance is the maximum value when the safety output frequently repeats ON and OFF. When you use the safety output at 4 Hz or less, the usable load inductance becomes larger. 2.These values must be taken into consideration when connecting elements including a capacitive load such as a capacitor.
	Auxiliary Output		One PNP or NPN transistor output (Safety Output and homopolarity) Load current of 100 mA max., Residual voltage of 2 V max .
	Output Operation Mode	Safety Output	Light-ON (Safety output is enabled when the receiver receives an emitting signal.)
	Output Operation Mode	Auxiliary Output	Reverse output of safety output
	Input Voltage	External device monitoring input (Lockout reset input)	PNP ON voltage: Vs-3 V to Vs (short circuit current: approx. 6.5 mA) * OFF voltage: 0 V to 1/2 Vs, or open (short circuit current: approx. 8.0 mA) * NPN ON voltage: 0 to 3 V (short circuit current: approx. 8.0 mA) * OFF voltage: 1/2 Vs to Vs, or open (short circuit current: approx. 6.5 mA) *
		Test input	24 V inactive setting ON voltage: 0 to 1.5 V or open (short circuit current: approx. 2.0 mA) OFF voltage: 9 V to Vs (short circuit current: approx. 2.5 mA) * 0 V inactive setting ON voltage: 9 V to Vs or open (short circuit current: approx. 2.5 mA) OFF voltage: 0 to 3 V (short circuit current: approx. 2.0 mA)
		* The Vs indicates a supply voltage value in your environment.
	Overvoltage Category (IEC 60664-1)		II
	Indicators		Refer to “Indicator”.
	Protective Circuit		Output short protection, Power supply reverse polarity protection
	Insulation Resistance		20 MΩ or higher (500 VDC megger)
	Dielectric Strength		1,000 VAC, 50/60 Hz (1 min)
Func- tional	Mutual Interference Prevention (Scan Code)		This function prevents mutual interference in up to two F3SG-RA systems.
	Cascade Connection		Number of cascaded segments: 3 max. Total number of beams: 255 max. Cable length between sensors: 10 m max. (not including cascading cable (F39-JGR2WTS) and power cable)
	Test Function		Self-test (at power-on, and during operation) External test (light emission stop function by test input)
	Safety-Related Functions		External device monitoring (EDM) Scan code selection PNP/NPN selection
Environ- mental	Ambient Temperature	Operating	-10 to 55°C (14 to 131°F) (non-icing)
	Ambient Temperature	Storage	-25 to 70°C (-13 to 158°F)
	Ambient Humidity	Operating	35% to 85% (non-condensing)
	Ambient Humidity	Storage	35% to 95%
	Ambient Illuminance		Incandescent lamp: 3,000 Ix max. on receiver surface Sunlight: 10,000 Ix max. on receiver surface
	Degree of Protection (IEC 60529)		IP65 and IP67
	Vibration Resistance (IEC 61496-1)		10 to 55 Hz, Multiple amplitude of 0.7 mm, 20 sweeps for all 3 axes
	Shock Resistance (IEC 61496-1)		100 m/s², 1000 shocks for all 3 axes
	Pollution Degree (IEC 60664-1)		Pollution Degree 3
Connec- tions	Power cable	Type of Connection	M12 connectors: 8-pin emitter and receiver, IP67 rated when mated, Cables pre-wired to the sensors
		Number of Wires	On emitter: 5-wire, On receiver: 8-wire
		Cable Length	0.3 m
		Cable Diameter	6 mm
		Minimum Bending Radius	R5 mm
	Cascading cable	Type of Connection	M12 connectors: 8-pin emitter and receiver, IP67 rated when mated
		Number of Wires	On emitter: 5-wire, On receiver: 8-wire
		Cable Length	0.2 m
		Cable Diameter	6 mm
		Minimum Bending Radius	R5 mm
	Extension cable – Single- Ended Cable – Double- Ended Cable	Type of Connection	M12 connectors: 8-pin emitter and receiver, IP67 rated when mated
		Number of Wires	On emitter and receiver: 8-wire
		Cable Length	Refer to Lineup.
		Cable Diameter	6.6 mm
		Minimum Bending Radius	R36 mm
	Extension of Power Cable		100 m max.(Emitter/Receiver)
Material	Material		Housing: Aluminum alloy Cap: PBT resin Front window: Acrylic resin Cable: Oil-resistant PVC resin FE plate: Stainless steel
	Weight		Refer to “List of Models/Response Time/Current Consumption/Weight”.
	Included Accessories		Safety Precautions, Quick Installation Manual, Troubleshooting Guide Sticker,
Con- formity	Conforming standards		Refer to “Legislation and Standards”.
	Type of ESPE (IEC 61496-1)		Type 4
	Performance Level (PL)/ Safety category		PL e/Category 4 (EN ISO 13849-1:2015)
	PFH_D		1.1 × 10^-8 (IEC 61508)
	Proof test interval T_M		Every 20 years (IEC 61508)
	SFF		99% (IEC 61508)
	HFT		1 (IEC 61508)
	Classification		Type B (IEC 61508-2)

Bluetooth Communication Unit

Communication System	Bluetooth Version 3.0
Communication Profile	SPP (Serial Port Profile)
Transmission Distance	Approx. 10 m max. (Output power: Class 2) *

* It depends on use environment conditions.

List of Models/Response Time/Current Consumption/Weight

Model	Number of Beams	Pro- tective Height [mm]	Response Time [ms] *1			Current Consumption [mA]		Weight [kg]
Model	Number of Beams	Pro- tective Height [mm]	ON → OFF *2	OFF (Syn- chronized) → ON	OFF (Not synchro- nized) → ON	Emitter	Receiver	Net *3	Gross *4
F3SG-4RA0185-25-01TS	8	185	8	40	140	35	75	0.7	1.4
F3SG-4RA0265-25-01TS	12	265	8	40	140	35	75	0.9	1.6
F3SG-4RA0345-25-01TS	16	345	8	40	140	40	75	1.1	1.9
F3SG-4RA0425-25-01TS	20	425	8	40	140	45	75	1.3	2.2
F3SG-4RA0505-25-01TS	24	505	8	40	140	50	75	1.5	2.5
F3SG-4RA0585-25-01TS	28	585	8	40	140	50	75	1.7	2.7
F3SG-4RA0665-25-01TS	32	665	8	40	140	55	75	1.9	3.0
F3SG-4RA0745-25-01TS	36	745	8	40	140	60	80	2.1	3.3
F3SG-4RA0825-25-01TS	40	825	8	40	140	65	80	2.3	3.6
F3SG-4RA0905-25-01TS	44	905	13	65	165	50	80	2.5	3.8
F3SG-4RA0985-25-01TS	48	985	13	65	165	50	80	2.8	4.1
F3SG-4RA1065-25-01TS	52	1065	13	65	165	55	80	3.0	4.4
F3SG-4RA1145-25-01TS	56	1145	13	65	165	55	85	3.2	4.7
F3SG-4RA1225-25-01TS	60	1225	13	65	165	55	85	3.4	5.0
F3SG-4RA1305-25-01TS	64	1305	13	65	165	60	85	3.6	5.2
F3SG-4RA1385-25-01TS	68	1385	13	65	165	60	85	3.8	5.5
F3SG-4RA1465-25-01TS	72	1465	13	65	165	65	85	4.0	5.8
F3SG-4RA1545-25-01TS	76	1545	13	65	165	65	90	4.2	6.0
F3SG-4RA1625-25-01TS	80	1625	13	65	165	70	90	4.4	6.3
F3SG-4RA1705-25-01TS	84	1705	13	65	165	70	90	4.6	6.6
F3SG-4RA1785-25-01TS	88	1785	13	65	165	70	90	4.9	6.9
F3SG-4RA1865-25-01TS	92	1865	13	65	165	75	90	5.1	7.1
F3SG-4RA1945-25-01TS	96	1945	13	65	165	75	95	5.3	7.4

Legislation and Standards

1. The F3SG-RA-01TS does not receive type approval provided by Article 44-2 of the Industrial Safety and Health Act of
Japan. When using the F3SG-RA-01TS in Japan as a “safety system for pressing or shearing machines” prescribed in
Article 42 of that law, the machine control system must receive type approval.

2. The F3SG-RA-01TS is electro-sensitive protective equipment (ESPE) in accordance with European Union (EU) Machinery
Directive Index Annex V, Item 2.

3. EC Declaration of Conformity
OMRON declares that the F3SG-RA-01TS is in conformity with the requirements of the following EC Directives:
Machinery Directive 2006/42/EC
EMC Directive 2014/30/EU

4. Conforming Standards
(1) European standards
EN61496-1 (Type 4 and Type 2 ESPE), EN 61496-2 (Type 4 and Type 2 AOPD), EN61508-1 through -4 (SIL 3 for
Type 4 and SIL 1 for Type 2), EN ISO 13849-1:2015 (PL e, Category 4 for Type 4 and PL c, Category 2 for Type 2)
(2) International standards
IEC61496-1 (Type 4 and Type 2 ESPE), IEC61496-2 (Type 4 and Type 2 AOPD), IEC61508-1 through -4 (SIL 3 for
Type 4 and SIL 1 for Type 2), ISO 13849-1:2015 (PL e, Category 4 for Type 4 and PL c, Category 2 for Type 2)
(3) JIS standards
JIS B 9704-1 (Type 4 and Type 2 ESPE), JIS B 9704-2 (Type 4 and Type 2 AOPD)
(4) North American standards
UL61496-1(Type 4 and Type 2 ESPE), UL61496-2(Type 4 and Type 2 AOPD), UL508, UL1998,
CAN/CSA C22.2 No.14, CAN/CSA C22.2 No.0.8

6. Other Standards
The F3SG-RA-01TS is designed according to the standards listed below. To make sure that the final system complies
with the following standards and regulations, you are asked to design and use it in accordance with all other related
standards, laws, and regulations. If you have any questions, consult with specialized organizations such as the body
responsible for prescribing and/or enforcing machinery safety regulations in the location where the equipment is to
be used.
• European Standards: EN415-4, EN691-1, EN692, EN693, IEC 62046
• U.S. Occupational Safety and Health Standards: OSHA 29 CFR 1910.212
• U.S. Occupational Safety and Health Standards: OSHA 29 CFR 1910.217
• American National Standards: ANSI B11.1 to B11.19
• American National Standards: ANSI/RIA R15.06
• Canadian Standards Association CSA Z142, Z432, Z434
• SEMI Standards SEMI S2
• Japan Ministry of Health, Labour and Welfare “Guidelines for Comprehensive Safety Standards of Machinery”,
Standard Bureau’s Notification No. 0731001 dated July 31, 2007.rms and Conditions Agreement

Indicator

Emitter

Name of Indicator	Color	Illuminated	Blinking
TEST	Green	–	External Test is being performed
LONG	Green	Long range mode is selected	Lockout state due to DIP Switch setting error or Operating range selection setting error
POWER	Green	Power is ON.	Error due to noise
LOCKOUT	Red	–	Lockout state due to error in emitter

Receiver

Name of Indicator	Color	Illuminated	Blinking
TOP	Blue	The top beam is unblocked	Lockout state due to Cap error or Other sensor error
NPN	Green	NPN mode is selected by DIP Switch	–
CFG	Green	–	Lockout state due to Cascading Configuration error
EDM	Green	EDM input is in ON state *	Lockout state due to EDM error
INTERNAL	Red	–	Lockout state due to Internal error, or error due to abnormal power supply or noise
LOCKOUT	Red	–	Lockout state due to error in receiver
STB	Green	Incident light level is 170% or higher of ON-threshold	Safety output is instantaneously turned OFF due to ambient light or vibration.
ON/OFF	Green	Safety output is in ON state	–
ON/OFF	Red	Safety output is in OFF state	Lockout state due to Safety Output error, or error due to abnormal power supply or noise
COM	Green	Synchronization between emitter and receiver is maintained	Lockout state due to Communication error, or error due to abnormal power supply or noise
BTM	Blue	The bottom beam is unblocked	Lockout state due to DIP Switch setting error

* The LED is illuminated when the EDM input is in ON state regardless of wiring with EDM used or unused.

Interface Unit

Main unit	PC/AT compatible machine (computer that runs Microsoft Windows)
Operating system (OS)	Windows 7 (32-bit/64-bit), Windows 8, 8.1 (32-bit/64-bit), Windows 10 (32-bit/64-bit)
Communication port	USB port ×1
Ambient temperature	Operating: -10 to 55°C, Storage: -30 to 70°C(non-icing and non-condensing)
Ambient humidity	Operating: 35% to 85%, Storage: 35% to 95%(non-condensing)

Lamp

Item	F39-LP
Applicable Sensor	F3SG-[]RA Series Safety Light Curtain (Receiver)
LED Light Color	Red/Orange/Green
Power Supply Voltage	24 VDC±20%, ripple p-p 10% max.(shares sensor’s power supply)
Current Consumption	25 mA max. (shares sensor′s power supply.)
Ambient Temperature	Operating: -10 to 55°C, Storage: -25 to 70°C
Ambient Humidity	Operating: 35% to 85%, Storage: 35% to 95%
Vibration Resistance	10 to 55 Hz, Multiple amplitude of 0.7 mm,20 sweeps for all 3 axes
Shock Resistance	100 m/s² , 1000 shocks for all 3 axes
Degree of Protection	IP65 and IP67(When attached to F3SG)
Type of Connection	Connectable to F3SG-RA’s terminal connector
Material	Lighting element: PC, Other body parts: PBT
Weight	45 g (when packaged)

F3SG-RA-02TS

Main unit

The [][][][] in the model names indicate the protective heights in millimeters.

			F3SG-4RA[][][][]-25-02TS
Perform- ance	Object Resolution (Detection Capability)		Opaque objects
	Object Resolution (Detection Capability)		25-mm dia.
	Beam Gap		20 mm
	Number of Beams		12 to 96
	Lens Size		6.0 × 5.0 (W × H) mm
	Protective Height		240 to 1920 mm
	Operating Range		0.3 to 17.0 m
	Response Time	ON to OFF	Normal mode: 8 to 13 ms *1
		OFF to ON	Normal mode: 40 to 90ms (synchronized), 140 to 190ms (not synchronized) *1
		*1.Response time when used in one segment system or in cascaded connection. Refer to the one segment system. Refer to Safety Light Curtain F3SG-4RA[][][][]-25-02TS Series User’s Manual (ManNo.: Z391) for cascaded connection.
	EffectiveApertureAngle (EAA) (IEC 61496-2)		±2.5° max., emitter and receiver at operating range of 3 m or greater
	Light Source		Infrared LEDs, Wavelength: 870 nm
	Startup Waiting Time		2 s max.
Elec- trical	Power Supply Voltage (Vs)		SELV/PELV 24 VDC±20% (ripple p-p 10% max.)
	Current Consumption		Refer to “List of Models/Response Time/Current Consumption/Weight”.
	Safety Outputs (OSSD)		Two PNP transistor outputs
	Safety Outputs (OSSD)		Load current of 300 mA max., Residual voltage of 2 V max. (except for voltage drop due to cable extension), Capacitive load of 1 μF max., Inductive load of 2.2 H max. 1 Leakage current of 1 mA max.1. The load inductance is the maximum value when the safety output frequently repeats ON and OFF. When you use the safety output at 4 Hz or less, the usable load inductance becomes larger. *2. These values must be taken into consideration when connecting elements including a capacitive load such as a capacitor.
	Auxiliary Output		One PNP transistor output
	Auxiliary Output		Load current of 100 mA max., Residual voltage of 2 V max .
	Output Operation Mode	Safety Output	Light-ON (Safety output is enabled when the receiver receives an emitting signal.)
	Output Operation Mode	Auxiliary Output	Reverse output of safety output
	Input Voltage	External device monitoring input (Lockout reset input)	ON voltage: Vs-3 V to Vs (short circuit current: approx. 6.5 mA) * OFF voltage: 0 V to 1/2 Vs, or open (short circuit current: approx. 8.0 mA) *
		Test input	24 V Active setting: ON voltage: 9 V to Vs (short circuit current: approx. 2.5 mA) * OFF voltage: 0 V to 1.5 V or open (short circuit current: approx. 2.0 mA) 0 V Active setting: ON voltage: 0 V to 3 V (short circuit current: approx. 2.0 mA) OFF voltage: 9 V to Vs or open (short circuit current: approx. 2.5 mA) *
		* The Vs indicates a supply voltage value in your environment.
	Overvoltage Category (IEC 60664-1)		II
	Indicators		Refer to “Indicator”.
	Protective Circuit		Output short protection, Power supply reverse polarity protection
	Insulation Resistance		20 MΩor higher (500 VDC megger)
	Dielectric Strength		1,000 VAC, 50/60 Hz (1 min)
Func- tional	Mutual Interference Prevention (Scan Code)		This function prevents mutual interference in up to two F3SG-RA-25-02TS systems.
	Cascade Connection		Number of cascaded segments: 3 max. (only among F3SG-4RA[][][][]-25-02TS’s)
	Cascade Connection		Total number of beams: 255 max. Cable length between sensors: 10 m max. (not including cascading cable (F39-JGR2WTS) and power cable)
	Test Function		Self-test (at power-on, and during operation) External test (light emission stop function by test input)
	Safety-Related Functions		External device monitoring (EDM) Scan code selection
Environ- mental	Ambient Temperature	Operating	-10 to 55°C (14 to 131°F) (non-icing)
	Ambient Temperature	Storage	-25 to 70°C (-13 to 158°F)
	Ambient Humidity	Operating	35% to 85% (non-condensing)
	Ambient Humidity	Storage	35% to 95%
	Ambient Illuminance		Incandescent lamp: 3,000 Ix max. on receiver surface Sunlight: 10,000 Ix max. on receiver surface
	Degree of Protection (IEC 60529)		IEC 60529: IP65 and IP67, JIS C 0920 Annex 1: IP67G
	Vibration Resistance (IEC 61496-1)		10 to 55 Hz, Multiple amplitude of 0.7 mm, 20 sweeps for all 3 axes
	Shock Resistance (IEC 61496-1)		100 m/s², 1000 shocks for all 3 axes
	Pollution Degree (IEC 60664-1)		Pollution Degree 3
Connec- tions	Power cable	Type of Connection	M12 connectors: 8-pin emitter and receiver. Cables prewired to the sensors. IP67 and IP67G (JIS C 0920 Annex 1) * rated when mated. * F3SG-RA-25-02TS meets the degree of protection when it is correctly connected withan F39-JD[][]RA-[] Oil-Resistant extension cable.
		Number of Wires	Emitter: 5, Receiver: 8
		Cable Length	0.3 m
		Cable Diameter	6 mm
		Minimum Bending Radius	R36 mm
	Cascading cable	Type of Connection	M12 connectors: 8-pin emitter and receiver. IP67 rated when mated.
		Number of Wires	Emitter: 5, Receiver: 8
		Cable Length	0.3 m
		Cable Diameter	6 mm
		Minimum Bending Radius	R5 mm
	F39-JD[]RA-[] Oil- Resistant cable – Single- Ended Cable	Type of Connection	M12 connectors: 8-pin emitter and receiver. Cables prewired to the sensors. IP67 and IP67G (JIS C 0920 Annex 1)* rated when mated. * F3SG-RA-25-02TS meets the degree of protection when it is correctly connected with the power cable. The degree of protection is not satisfied with the part where cable wires are uncovered.
		Number of Wires	Emitter: 5, Receiver: 8
		Cable Length	Refer to Lineup.
		Cable Diameter	6 mm
		Minimum Bending Radius	R36 mm
	Extension cable – Single- Ended Cable (F39-JD[]A) – Double- Ended Cable (F39-JD[]B)	Type of Connection	M12 connectors: 8-pin emitter and receiver. IP67 rated when mated.
		Number of Wires	Emitter: 8, Receiver: 8
		Cable Length	Refer to Lineup.
		Cable Diameter	6.6 mm
		Minimum Bending Radius	R36 mm
	Extension of Power Cable		100 m max. (Emitter/Receiver)
Material	Material		Housing: Aluminum alloy Cap: PBT resin Front window: Acrylic resin Cable: Fluororesin FE plate: Stainless steel
	Weight		Refer to “List of Models/Response Time/Current Consumption/Weight”.
	Included Accessories		Safety Precautions, Quick Installation Manual, Troubleshooting Guide Sticker, End Cap (for switching External Test Input function)
Con- formity	Conforming standards		Refer to “Legislation and Standards”.
	Performance Level (PL)/ Safety category		PL e/Category 4 (EN ISO 13849-1:2015)
	PFH_D		1.1 × 10^-8(IEC 61508)
	Proof test interval TM		Every 20 years (IEC 61508)
	SFF		99% (IEC 61508)
	HFT		1 (IEC 61508)
	Classification		Type B (IEC 61508-2)

Bluetooth Communication Unit

Communication System	Bluetooth Version 3.0
Communication Profile	SPP (Serial Port Profile)
Transmission Distance	Approx. 10 m max. (Output power: Class 2) *

* It depends on use environment conditions.

List of Models/Response Time/Current Consumption/Weight

Model	Number of Beams	Pro- tective Height [mm]	Response Time [ms] *1			Current Consumption [mA]		Weight [kg]
Model	Number of Beams	Pro- tective Height [mm]	ON → OFF *2	OFF (Syn- chronized) → ON	OFF (Not synchro- nized) → ON	Emitter	Receiver	Net *3	Gross *4
F3SG-4RA0240-25-02TS	12	240	8	40	140	35	75	0.7	1.6
F3SG-4RA0320-25-02TS	16	320	8	40	140	40	75	0.9	1.9
F3SG-4RA0400-25-02TS	20	400	8	40	140	45	75	1.1	2.1
F3SG-4RA0480-25-02TS	24	480	8	40	140	50	75	1.3	2.4
F3SG-4RA0560-25-02TS	28	560	8	40	140	50	75	1.5	2.7
F3SG-4RA0640-25-02TS	32	640	8	40	140	55	75	1.7	3.0
F3SG-4RA0720-25-02TS	36	720	8	40	140	60	80	1.9	3.2
F3SG-4RA0800-25-02TS	40	800	8	40	140	65	80	2.1	3.5
F3SG-4RA0880-25-02TS	44	880	13	65	165	50	80	2.3	3.8
F3SG-4RA0960-25-02TS	48	960	13	65	165	50	80	2.5	4.0
F3SG-4RA1040-25-02TS	52	1040	13	65	165	55	80	2.7	4.3
F3SG-4RA1120-25-02TS	56	1120	13	65	165	55	85	2.9	4.6
F3SG-4RA1200-25-02TS	60	1200	13	65	165	55	85	3.1	4.9
F3SG-4RA1280-25-02TS	64	1280	13	65	165	60	85	3.3	5.1
F3SG-4RA1360-25-02TS	68	1360	13	65	165	60	85	3.5	5.4
F3SG-4RA1440-25-02TS	72	1440	13	65	165	65	85	3.7	5.7
F3SG-4RA1520-25-02TS	76	1520	13	65	165	65	90	3.9	5.9
F3SG-4RA1600-25-02TS	80	1600	13	65	165	70	90	4.1	6.2
F3SG-4RA1680-25-02TS	84	1680	13	65	165	70	90	4.3	6.5
F3SG-4RA1760-25-02TS	88	1760	13	65	165	70	90	4.5	6.7
F3SG-4RA1840-25-02TS	92	1840	13	65	165	75	90	4.7	7.0
F3SG-4RA1920-25-02TS	96	1920	13	65	165	75	95	4.9	7.3

Legislation and Standards

1. The F3SG-RA-02TS does not receive type approval provided by Article 44-2 of the Industrial Safety and Health Act of
Japan. When using the F3SG-RA-02TS in Japan as a “safety system for pressing or shearing machines” prescribed in
Article 42 of that law, the machine control system must receive type approval.

2. The F3SG-RA-02TS is electro-sensitive protective equipment (ESPE) in accordance with European Union (EU) Machinery
Directive Index Annex V, Item 2.

3. EC/EU Declaration of Conformity
OMRON declares that the F3SG-RA-02TS is in conformity with the requirements of the following EC/EU Directives:
Machinery Directive 2006/42/EC
EMC Directive 2014/30/EU

4. Conforming Standards
(1) European standards
EN61496-1 (Type 4 ESPE), EN 61496-2 (Type 4 AOPD), EN61508-1 through -4 (SIL 3),
EN ISO 13849-1:2015 (PL e, Category 4)
(2) International standards
IEC61496-1 (Type 4 ESPE), IEC61496-2 (Type 4 AOPD), IEC61508-1 through -4 (SIL 3),
ISO 13849-1:2015 (PL e, Category 4)
(3) JIS standards
JIS B 9704-1 (Type 4 ESPE), JIS B 9704-2 (Type 4 AOPD)
(4) North American standards
UL61496-1 (Type 4 ESPE), UL61496-2 (Type 4 AOPD), UL508, UL1998,
CAN/CSA C22.2 No.14, CAN/CSA C22.2 No.0.8

5. Third-Party Certifications
(1) TÜV SÜD
• EC Type-Examination certificate:
EU Machinery Directive, Type 4 ESPE (EN61496-1), Type 4 AOPD (EN 61496-2)
• Certificate:
Type 4 ESPE (EN61496-1), Type 4 AOPD (EN61496-2), EN 61508-1 through -4 (SIL 3),
EN ISO 13849-1:2015 (PL e, Category 4)
(2) UL
• UL Listing:
Type 4 and ESPE (UL61496-1), Type 4 AOPD (UL61496-2), UL508, UL1998,
CAN/CSA C22.2 No.14, CAN/CSA C22.2 No.0.8

6. Other Standards
The F3SG-RA-02TS is designed according to the standards listed below. To make sure that the final system complies
with the following standards and regulations, you are asked to design and use it in accordance with all other related
standards, laws, and regulations. If you have any questions, consult with specialized organizations such as the body
responsible for prescribing and/or enforcing machinery safety regulations in the location where the equipment is to
be used.
• European Standards: EN415-4, EN691-1, EN692, EN693, IEC 62046
• U.S. Occupational Safety and Health Standards: OSHA 29 CFR 1910.212
• U.S. Occupational Safety and Health Standards: OSHA 29 CFR 1910.217
• American National Standards: ANSI B11.1 to B11.19
• American National Standards: ANSI/RIA R15.06
• Canadian Standards Association CSA Z142, Z432, Z434
• SEMI Standards SEMI S2
• Japan Ministry of Health, Labour and Welfare “Guidelines for Comprehensive Safety Standards of Machinery”,
Standard Bureau’s Notification No. 0731001 dated July 31, 2007.rms and Conditions Agreement

Indicator

Emitter

Name of Indicator		Color	Illuminated	Blinking
Test	TEST	Green	–	External Test is being performed
Operating range	LONG	Green	Always illuminated	Lockout state due to Scan code setting error
Power	POWER	Green	Power is ON.	Error due to noise
Lockout	LOCKOUT	Red	–	Lockout state due to error in emitter

Receiver

Name of Indicator		Color	Illuminated	Blinking
Top-beam-state	TOP	Blue	The top beam is unblocked	Lockout state due to Cap error or Other sensor error
PNP/NPN mode	NPN	Green	Always illuminated	–
Configuration	CFG	Green	–	Lockout state due to Parameter error or Cascading Configuration error
External device monitoring	EDM	Green	EDM input is in ON state *	Lockout state due to EDM error
Internal error	INTERNAL	Red	–	Lockout state due to Internal error, or error due to abnormal power supply or noise
Lockout	LOCKOUT	Red	–	Lockout state due to error in receiver
Stable-state	STB	Green	Incident light level is 170% or higher of ON-threshold	Safety output is instantaneously turned OFF due to ambient light or vibration
ON/OFF	ON/OFF	Green	Safety output is in ON state	–
ON/OFF	ON/OFF	Red	Safety output is in OFF state	Lockout state due to Safety Output error, or error due to abnormal power supply or noise
Communication	COM	Green	Synchronization between emitter and receiver is maintained	Lockout state due to Communication error, or error due to abnormal power supply or noise
Bottom-beam state	BTM	Blue	The bottom beam is unblocked	Lockout state due to Scan code setting error

Note: TOP, CFG, LOCKOUT, STB and ON/OFF indicators are illuminated when the receiver of the F3SG-RA-02TS is in Setting mode.
* The EDM indicator is illuminated when the EDM input is in the ON state regardless of the use of the EDM function.

Interface Unit

Main Unit	PC/AT compatible machine (computer that runs Microsoft Windows)
Operating System (OS)	Windows 7 (32-bit/64-bit), Windows 8, 8.1 (32-bit/64-bit), Windows 10 (32-bit/64-bit)
Communication Port	USB port ×1
Ambient Temperature	Operating: -10 to 55°C, Storage: -30 to 70°C (non-icing and non-condensing)
Ambient Humidity	Operating: 35% to 85%, Storage: 35% to 95% (non-condensing)

Lamp

Item	F39-LP
Applicable Sensor	F3SG-[]RA Series Safety Light Curtain (Receiver)
LED Light Color	Red/Green/Orange
Power Supply Voltage	24 VDC±20%, ripple p-p 10% max. (shares sensor’s power supply)
Current Consumption	25 mA max. (shares sensor’s power supply.)
Ambient Temperature	Operating: -10 to 55°C, Storage: -25 to 70°C
Ambient Humidity	Operating: 35% to 85%, Storage: 35% to 95%
Vibration Resistance	10 to 55 Hz, Multiple amplitude of 0.7 mm, 20 sweeps for all 3 axes
Shock Resistance	100 m/s² , 1000 shocks for all 3 axes
Degree of Protection	IP65 and IP67 (When attached to F3SG)
Type of Connection	Connectable to F3SG-RA’s terminal connector
Material	Lighting element: PC, Other body parts: PBT
Weight	45 g (when packaged)

Dimensions| Safety Light Curtain – F3SG-R series series

(Unit: mm)

F3SG-RA Advanced type

Mounted with Standard Fixed Brackets (F39-LGF)

Backside Mounting

F3SG-R Series Dimensions 3

Side Mounting

F3SG-R Series Dimensions 4

Mounted with Standard Adjustable Brackets (F39-LGA)

Backside Mounting

F3SG-R Series Dimensions 6

Side Mounting

F3SG-R Series Dimensions 7

Mounted with Top/Bottom Adjustable Brackets (F39-LGTB) and Standard Adjustable Brackets (F39-LGA)

Dimensions when using the F3SG-RA Series except the F3SG-4RA0190-30 and F3SG-4RA0160-14
Refer to Safety Light Curtain F3SG-R Series User’s Manual for the dimensions when using the F3SG-4RA0190-30 and F3SG-4RA0160-14.

Backside Mounting

F3SG-R Series Dimensions 9

Side Mounting

F3SG-R Series Dimensions 10

Accessories

Sensor Mounting Brackets

Standard Fixed Bracket (F39-LGF)

F3SG-R Series Dimensions 13

Standard Adjustable Bracket (F39-LGA, sold separately)

F3SG-R Series Dimensions 14

Top/Bottom Adjustable Bracket (F39-LGTB, sold separately)

F3SG-R Series Dimensions 15

Safety light curtain connecting cable

Single-Ended Cable for Emitter (F39-JG[]A-L, sold separately)

F3SG-R Series Dimensions 17

Single-Ended Cable for Receiver (F39-JG[]A-D, sold separately)

F3SG-R Series Dimensions 18 F3SG-R Series Dimensions 19

Double-Ended Cable for Emitter: Cable for extension (F39-JG[]B-L, sold separately)

F3SG-R Series Dimensions 20

Double-Ended Cable for Receiver: Cable for extension (F39-JG[]B-D, sold separately)

F3SG-R Series Dimensions 21 F3SG-R Series Dimensions 22

Cascading Cable for Emitter (F39-JGR2W-L, sold separately)

F3SG-R Series Dimensions 23

Cascading Cable for Receiver (F39-JGR2W-D, sold separately)

F3SG-R Series Dimensions 24

Y-Joint Plug/Socket Connector (F39-GCNY2, sold separately)

F3SG-R Series Dimensions 25

Interface Unit (F39-GIF, sold separately)

F3SG-R Series Dimensions 26

Spatter Protection Cover (F39-HGA, sold separately)

F3SG-R Series Dimensions 27

Bluetooth Communication Unit (F39-BT, sold separately)

F3SG-R Series Dimensions 28

Lamp and Bluetooth Communication Unit(F39-BTLP, sold separately)
Lamp (F39-LP, sold separately)

F3SG-R Series Dimensions 29

F3SG-RR Robust type

Mounted with Free-Location Brackets (F39-LGRA)

Backside Mounting

F3SG-R Series Dimensions 32

Side Mounting

F3SG-R Series Dimensions 33

Mounted with Top/Bottom Brackets (F39-LGRTB) and Intermediate Bracket (F39-LGRA)

Backside Mounting

F3SG-R Series Dimensions 35

Side Mounting

F3SG-R Series Dimensions 36

Mounted with Top/Bottom Brackets (F39-LGRTB-2) and Intermediate Bracket (F39-LGRA)

Backside Mounting

F3SG-R Series Dimensions 38

Side Mounting

F3SG-R Series Dimensions 39

Mounted with Top/Bottom Brackets (F39-LGRTB-3) and Intermediate Bracket (F39-LGRA)

Backside Mounting

F3SG-R Series Dimensions 41

Side Mounting

F3SG-R Series Dimensions 42

Accessories

Sensor Mounting Brackets

Free-Location Bracket / Intermediate Bracket (F39-LGRA, sold separately)

F3SG-R Series Dimensions 45

Top/Bottom Bracket (F39-LGRTB, sold separately)

F3SG-R Series Dimensions 46

Top/Bottom Bracket (F39-LGRTB-2, sold separately)

F3SG-R Series Dimensions 47

Top/Bottom Bracket (F39-LGRTB-3, sold separately)

F3SG-R Series Dimensions 48

Safety light curtain connecting cable

Single-Ended Cable for Emitter (Oil-Resistant Cable) (F39-JD[]RA-L, sold separately)

F3SG-R Series Dimensions 50

Single-Ended Cable for Receiver (Oil-Resistant Cable) (F39-JD[]RA-D, sold separately)

F3SG-R Series Dimensions 51 F3SG-R Series Dimensions 52

Single-Ended Cable for Emitter (F39-JD[]A-L, sold separately)

F3SG-R Series Dimensions 53

Single-Ended Cable for Receiver (F39-JD[]A-D, sold separately)

F3SG-R Series Dimensions 54 F3SG-R Series Dimensions 55

Double-Ended Cable for Emitter: Cable for extension (F39-JD[]B-L, sold separately)

F3SG-R Series Dimensions 56

Double-Ended Cable for Receiver: Cable for extension (F39-JD[]B-D, sold separately)

F3SG-R Series Dimensions 57 F3SG-R Series Dimensions 58

Reduced Wiring Connector (F39-CN5, sold separately)

F3SG-R Series Dimensions 59

Cascading Cable for Emitter (F39-JGR2WTS-L, sold separately)

F3SG-R Series Dimensions 60

Cascading Cable for Receiver (F39-JGR2WTS-D, sold separately)

F3SG-R Series Dimensions 61 F3SG-R Series Dimensions 62

Interface Unit (F39-GIF-1, sold separately)

F3SG-R Series Dimensions 63

Bluetooth Communication Unit (F39-BT, sold separately)

F3SG-R Series Dimensions 64

Lamp and Bluetooth Communication Unit (F39-BTLP, sold separately) Lamp (F39-LP, sold separately)

F3SG-R Series Dimensions 65

F3SG-RE Easy type

Mounted with Standard Fixed Brackets (F39-LGF)

Backside Mounting

F3SG-R Series Dimensions 68

Side Mounting

F3SG-R Series Dimensions 69

Mounted with Standard Fixed Brackets (F39-LGA)

Backside Mounting

F3SG-R Series Dimensions 71

Side Mounting

F3SG-R Series Dimensions 72

Mounted with Top/Bottom Adjustable Brackets (F39-LGTB) and Standard Adjustable Brackets (F39-LGA)

Dimensions when using the F3SG-RE Series except the F3SG-4RE0190[]30 and F3SG-4RE0160[]14
Refer to Safety Light Curtain F3SG-R Series User’s Manual for the dimensions when using the F3SG-4RE0190[]30 and F3SG-4RE0160[]14.

Backside Mounting

F3SG-R Series Dimensions 74

Side Mounting

F3SG-R Series Dimensions 75

Accessories

Sensor Mounting Brackets

Standard Fixed Bracket (F39-LGF)

F3SG-R Series Dimensions 78

Standard Fixed Bracket (F39-LGA, sold separately)

F3SG-R Series Dimensions 79

Top/Bottom Adjustable Bracket (F39-LGTB, sold separately)

F3SG-R Series Dimensions 80

Safety light curtain connecting cable

Round Water-resistant Connector: Connector Connected to Cable, Socket on One Cable End (XS5F-D421-[]80-F, sold separately)

F3SG-R Series Dimensions 82

Round Water-resistant Connector: Connectors Connected to Cable, Socket and Plug on Cable Ends (XS5W-D421-[]81-F, sold separately)

F3SG-R Series Dimensions 83

Y-Joint Plug/Socket Connector (F39-GCNY1, sold separately)

F3SG-R Series Dimensions 84

Spatter Protection Cover(F39-HGA/-HGB, sold separately)

F3SG-R Series Dimensions 85

F3SG-RA-01TS

Mounted with Standard Fixed Brackets (F39-LGF)

Backside Mounting

F3SG-R Series Dimensions 88

Side Mounting

> F3SG-R Series Dimensions 89

Mounted with Standard Adjustable Brackets (F39-LGA)

Backside Mounting

F3SG-R Series Dimensions 91

Side Mounting

F3SG-R Series Dimensions 92

Mounted with Top/Bottom Adjustable Brackets (F39-LGTB) and Standard Adjustable Brackets (F39-LGA)

Dimensions when using the F3SG-RA Series except the F3SG-4RA0185-25-01TS.
Refer to Safety Light Curtain F3SG-4RA[][][][]-25-01TS Series User’s Manual for the dimensions when using the F3SG-4RA0185-25-01TS.

Backside Mounting

F3SG-R Series Dimensions 94

Side Mounting

F3SG-R Series Dimensions 95

Accessories

Sensor Mounting Brackets

Standard Fixed Bracket (F39-LGF, sold separately)

F3SG-R Series Dimensions 98

Standard Adjustable Bracket (F39-LGA, sold separately)

F3SG-R Series Dimensions 99

Top/Bottom Adjustable Bracket (F39-LGTB, sold separately)

F3SG-R Series Dimensions 100

Safety light curtain connecting cable

Single-Ended Cable for Emitter (F39-JD[]A-L, sold separately)

F3SG-R Series Dimensions 102

Single-Ended Cable for Receiver (F39-JD[]A-D, sold separately)

F3SG-R Series Dimensions 103 F3SG-R Series Dimensions 104

Double-Ended Cable for Emitter: Cable for extension (F39-JD[]B-L, sold separately)

F3SG-R Series Dimensions 105

Double-Ended Cable for Receiver: Cable for extension (F39-JD[]B-D, sold separately)

F3SG-R Series Dimensions 106 F3SG-R Series Dimensions 107

Reduced Wiring Connector (F39-CN5, sold separately)

F3SG-R Series Dimensions 108

Cascading Cable for Emitter (F39-JGR2WTS-L, sold separately)

F3SG-R Series Dimensions 109

Cascading Cable for Receiver (F39-JGR2WTS-D, sold separately)

F3SG-R Series Dimensions 110 F3SG-R Series Dimensions 111

Interface Unit (F39-GIF, sold separately)

F3SG-R Series Dimensions 112

Spatter Protection Cover (F39-HGA, sold separately)

F3SG-R Series Dimensions 113

Bluetooth Communication Unit (F39-BT, sold separately)

F3SG-R Series Dimensions 114

Lamp and Bluetooth Communication Unit (F39-BTLP, sold separately)
Lamp (F39-LP, sold separately)

F3SG-R Series Dimensions 115

F3SG-RA-02TS

Mounted with Free-Location Brackets (F39-LGRA)

Backside Mounting

F3SG-R Series Dimensions 118

Side Mounting

F3SG-R Series Dimensions 119

Mounted with Top/Bottom Brackets (F39-LGRTB) and Intermediate Bracket (F39-LGRA)

Backside Mounting

F3SG-R Series Dimensions 121

Side Mounting

F3SG-R Series Dimensions 122

Mounted with Top/Bottom Brackets (F39-LGRTB-2) and Intermediate Bracket (F39-LGRA)

Backside Mounting

F3SG-R Series Dimensions 124

Side Mounting

F3SG-R Series Dimensions 125

Mounted with Top/Bottom Brackets (F39-LGRTB-3) and Intermediate Bracket (F39-LGRA)

Backside Mounting

F3SG-R Series Dimensions 127

Side Mounting

F3SG-R Series Dimensions 128

Accessories

Sensor Mounting Brackets

Free-Location Bracket / Intermediate Bracket (F39-LGRA, sold separately

F3SG-R Series Dimensions 131

Top/Bottom Bracket (F39-LGRTB, sold separately)

F3SG-R Series Dimensions 132

Top/Bottom Bracket (F39-LGRTB-2, sold separately)

F3SG-R Series Dimensions 133

Top/Bottom Bracket (F39-LGRTB-3, sold separately)

F3SG-R Series Dimensions 134

Safety light curtain connecting cable

Single-Ended Cable for Emitter (Oil-Resistant Cable) (F39-JD[]RA-L, sold separately)

F3SG-R Series Dimensions 136

Single-Ended Cable for Receiver (Oil-Resistant Cable) (F39-JD[]RA-D, sold separately)

F3SG-R Series Dimensions 137 F3SG-R Series Dimensions 138

Single-Ended Cable for Emitter (F39-JD[]A-L, sold separately)

F3SG-R Series Dimensions 139

Single-Ended Cable for Receiver (F39-JD[]A-D, sold separately)

F3SG-R Series Dimensions 140 F3SG-R Series Dimensions 141

Double-Ended Cable for Emitter: Cable for extension (F39-JD[]B-L, sold separately)

F3SG-R Series Dimensions 142

Double-Ended Cable for Receiver: Cable for extension (F39-JD[]B-D, sold separately)

F3SG-R Series Dimensions 143 F3SG-R Series Dimensions 144

Reduced Wiring Connector (F39-CN5, sold separately)

F3SG-R Series Dimensions 145

Cascading Cable for Emitter (F39-JGR2WTS-L, sold separately)

F3SG-R Series Dimensions 146

Cascading Cable for Receiver (F39-JGR2WTS-D, sold separately)

F3SG-R Series Dimensions 147 F3SG-R Series Dimensions 148

Interface Unit (F39-GIF-1, sold separately)

F3SG-R Series Dimensions 149

Bluetooth Communication Unit (F39-BT, sold separately)

F3SG-R Series Dimensions 150

Lamp and Bluetooth Communication Unit (F39-BTLP, sold separately)
Lamp (F39-LP, sold separately)

F3SG-R Series Dimensions 151

Features | Safety Light Curtain – F3SG-R series

System installed and highly susceptible to changing conditions
Quick mount brackets reduce setup time by 50%
Optical synchronization – No sync lines required
Simple wiring thanks to reduced wiring connectors
Scan QR code with smart phone for local language support and troubleshooting guide
All models designed for global use. PNP/NPN outputselection by DIP switch
Fast response time of 8ms
ADVANCE model supports complex safety solutions with muting and blanking functions. F3SG-RE[Reduced wiring and fast response] Simple ON/OFF detection
Easy version for cost-efficiency
Fast response time of 5 ms
QR code indication for easy online troubleshooting
For stand-alone devices.

Properties | Safety Light Curtain – F3SG-R series

Safety Light Curtain	F3SG-RA	F3SG-RE	F3SG-RR
Object Resolution	Ø 14 / 30 mm	Ø 14 / 30 mm	Ø 14 / 25 mm
Beam gap	10 / 20 mm	10 / 30 mm	10 / 20 mm
Number of beams	15-207 / 8-124	15-207 / 8-124	23-191 / 12-96
Height	160-2080 / 190-2510 mm	160-2080 / 190-2510 mm	240-1920 mm
Dimensions	5.2 x 3.4 mm / 7mm dia.	5.2 x 3.4 mm / 7mm dia.	5.2 x 3.4 mm / 6.0 x 5.0 mm
Enclosure	65 / 67	65 / 67	67 / 67G
Rangevoltage	24 VDC
Safety Output	2Port(PNPorNPN) , 24 VDC Current300 mA
Auxiliary Output	1 Port(PNPorNPN), 24 VDCCurrent 100 mA

ติดต่อแผนก Automation & Robots

OMRON Safety Light Curtain – F3SG-R series

Model Numbers | Safety Light Curtain – F3SG-R series

F3SG-RA Advanced type

Main Units

Safety Light Curtain

Finger protection

Hand and arm protection

Accessories (Sold separately)

Single-Ended Cable *

Double-Ended Cable *

For cable extension and simple wiring

Connection example

Y-Joint Plug/Socket Connector for F3SG-4RA[][][][]-14/-4RA[][][][]-30

For reduced wiring

Cascading Cable (2 cables per set, for emitter and receiver)

Connection example

Sensor Mounting Brackets

Interface units and configuration tool SD Manager 2

Lamp

End Cap

Laser Pointer for F3SG-R

Spatter Protection Cover (2 covers per set, one for emitter and one for receiver)

Test Rod

F3SG-RR Robust type

Main Units

Safety Light Curtain

Finger protection

Hand and arm protection

Accessories (Sold separately)

Single-Ended Cable (Oil-Resistant Cable)

Single-Ended Cable (2 cables per set, one for emitter and one for receiver) *

Double-Ended Cable (2 cables per set, one for emitter and one for receiver) *

Connection example

Reduced Wiring Connector System (Order the F39-CN5 and Cables for Reduce Wiring.)

Reduced Wiring Connector

Cable for Reduce Wiring* (2 cables per set, one for emitter and one for receiver)

Cascading Cable (2 cables per set, one for emitter and one for receiver)

Sensor Mounting Brackets

Interface units and configuration tool SD Manager 2

Lamp *

End Cap *1 *2

Laser Pointer for F3SG-R *

Test Rod

F3SG-RE Easy type

Main Units

Safety Light Curtain

Finger protection

Hand and arm protection

Accessories (Sold separately)

Single-Ended Cable (Round Water-resistant Connector: Connector Connected to Cable, Socket on One Cable End)

Double-Ended Cable (Round Water-resistant Connector: Connectors Connected to Cable, Socket and Plug on Cable Ends)

For cable extension and simple wiring

Connection example

Y-Joint Plug/Socket Connector for Easy type F3SG-RE

Sensor Mounting Brackets

Laser Pointer for F3SG-R

Spatter Protection Cover (2 covers per set, one for emitter and one for receiver)

Test Rod

F3SG-RA-01TS

Main Units

Safety Light Curtain

Hand and arm protection

Accessories (Sold separately)

Single-Ended Cable (2 cables per set, one for emitter and one for receiver) *

Doble-Ended Cable (2 cables per set, one for emitter and one for receiver) *

For cable extension

Connection example

Cascading Cable (2 cables per set, for emitter and receiver)

Connection example

Reduced Wiring Connector System (Order the F39-CN5 and Cables for Reduce Wiring.)

Reduced Wiring Connector

Cable for Reduce Wiring* (2 cables per set, one for emitter and one for receiver)

Sensor Mounting Brackets

Interface units and configuration tool SD Manager 2 *

Lamp

End Cap *

Laser Pointer for F3SG-R

Spatter Protection Cover (2 covers per set, one for emitter and one for receiver)

Test Rod

F3SG-RA-02TS

End Cap 1 2

Interface units and configuration tool SD Manager 2 1 2

End Cap 1 2