Add to wishlist
E2K-L
E2K-L
E2K-L
E2K-L

OMRON Proximity Sensor – E2K-L

    Liquid Level Sensor That Is Unaffected by the Color of the Pipe or Liquid Mount to bypass pipes. Built-in Amplifiers to save space.

    button

    Category:

      OMRON Proximity Sensor - E2K-L

      E2K-L (1)

      OMRON Proximity Sensor Capacitive – E2K-L

      Model Numbers | Proximity Sensor Capacitive – E2K-L

      Sensors

      Sensing method Applicable pipe diameters Appearance Output configuration / Operation mode Model
      Capacitive 8 to 11 mm 475_lu_1_1 NPN open-collector output NO E2K-L13MC1 2M
      NC E2K-L13MC2 2M
      12 to 26 mm 475_lu_1_2 NO E2K-L26MC1 2M
      NC E2K-L26MC2 2M

      Specifications | Proximity Sensor Capacitive – E2K-L

      Item E2K-L13MC[] E2K-L26MC[]
      Applicable
      pipes      		 Materials Non-metal
      Size Diameter 8 to 11 mm 12 to 26 mm
      Thickness 1 mm max. 1.5 mm max.
      Detectable object Liquid *
      Repeat accuracy ±0.2 mm max.
      Differential travel
      (Reference value, varies
      with pipe size and liquid.)      		 0.6 to 5 mm 0.3 to 3 mm
      Power supply voltage
      (operating voltage range)      		 12 to 24 VDC (10.8 to 30 VDC), ripple (p-p): 10% max.
      Current consumption 12 mA max.
      Control output Load current 100 mA max.
      Residual
      voltage      		 1 V max. (Load current: 100 mA, Cable length: 2 m)
      Sensing liquid position Indented mark position (For details, refer to Datasheet)
      Indicators Detection indicator (orange)
      Ambient temperature range Operating: 0 to 55°C (with no icing or condensation),
      Storage: -10 to 65°C (with no icing or condensation)
      Ambient humidity range Operating/Storage: 25% to 85% (with no condensation)
      Temperature influence ±4 mm of detection level at 23°C in the temperature range of 0 to 55°C
      (with pure water or 20% saline solution)
      (±6 mm for E2K-L13MC[] with pure water and a pipe diameter of 8 mm)
      Voltage influence ±0.5 mm of detection level at the rated voltage in rated voltage ±10% range
      Insulation resistance 50 MΩ min. (at 500 VDC) between current-carrying parts and case
      Dielectric strength 500 VAC, 50/60 Hz for 1 min between current-carrying parts and case
      Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y,
      and Z directions
      Shock resistance Destruction: 500 m/s2 3 times each in X, Y, and Z directions
      Degree of protection IP66 (IEC)
      Connection method Pre-wired Models (Standard cable length: 2 m)
      Weight (packed state) Approx. 70 g
      Materials Case, Cover Heat-resistant ABS
      Cable clamp NBR
      Accessories Two bands, Four slip-proof tubes, One driver for sensitivity adjustment,
      Instruction manual

      * Stable detection will not be possible in the following cases. Confirm detection capability with the Sensor installed before
         actual application.
      1. If the specific inductive capacity or the specific electric conductivity of the liquid is too low, the liquid position may not be
           detected since this sensor is a capacitive sensor.
      2. If the quantity of liquid is too low or the change in quantity is too low in comparison to the change in liquid level because
           the pipe is too thin or the walls of the pipe are too thick
      3. If there is a viscous film on the inner pipe wall, large quantities of foam or air bubbles, or excessive buildup of dirt on
           the inner pipe wall

      Dimensions | Proximity Sensor Capacitive – E2K-L

      (Unit: mm)

      Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified.

      E2K-L13MC[]

      E2K-L Dimensions 2

      E2K-L26MC[]

      คุณสมบัติ | Proximity Sensor Capacitive – E2K-L

      • ยึดติดกับท่อบายพาส
      • เส้นผ่าศูนย์กลางของท่อ: 8-11 มม., 12-26 มม.
      • มีวงจรขยายในตัวเพื่อประหยัดพื้นที่

      คุณสมบัติ | Proximity Sensor Capacitive – E2K-L

      Proximity Sensor Capacitive E2K-L
      วัตถุที่ตรวจจับได้ Liquid
      เส้นผ่านศูนย์กลางท่อที่ใช้งานได้ (มม.) 8–11, 12–26
      วัสดุท่อที่ใช้งานได้ อโลหะ
      วัสดุตัวเรือน พลาสติก
      แหล่งจ่ายไฟ 12 – 24 VDC
      ระดับการป้องกัน IP66

      ติดต่อแผนก Automation & Robots

      Automation Department