DANA Quick release coupling – series 230/330

Engaging and disengaging the coupling : Engaging and disengaging are done by operating the threaded spindle located in the inner part of the coupling. The spindle can be reached from two sides and be operated. The spindle is tightened by means of a socket wrench (see table).

Category: DANA

Description

DANA Quick release coupling - series 230/330

DANA Quick release coupling – series 230/330

Feature | DANA Quick release coupling 230/330

Engaging and disengaging the coupling : Engaging and disengaging are done by operating the threaded spindle located in the inner part of the coupling. The spindle can be reached from two sides and be operated. The spindle is tightened by means of a socket wrench (see table).

Notice
1. Before engaging the coupling, make sure that the coupling teeth are properly fitted.
2. The engagement direction is marked by arrows. The spindle may be tightened either clockwise or counterclockwise.
3. The joint with the coupling component falls back when disengaged. Caution: Danger of injury!
In case of a subsequent installation of the quick release coupling, the driveshaft must be correspondingly shorter. The threaded spindles of the coupling are lubricated by the supplier with MoS2. Relubrication is recommended from time to time.

Specifications | DANA Quick release coupling 230/330

ตารางสเปค 330 (Specification 330)

Coupling size			330.10	330.20	330.30		330.40	330.50				330.55
Shaft connection			687/688.15	687/688.20	687/688.25 687/688.35	687/688.30 687/688.40	687/688.40 687/688.45	687/688.45	687/688.55 687/688.65	587.50	392.50	587.55	392.55
Model	–	Nr.	000	003	003		003	000			001	000	001
	A	mm	100	130	150		180	225			225	250	250
	B	mm	84	101.5	130		155.5	196			196	218	218
	C¹)	mm	57	75	90		110	140			105	140	105
	C_k¹¹)	mm	57	75	90		110	140			105	140	105
	D²)	mm	20	38	40		40	45			45	45	45
	F	mm	2.5	2.5	3.5		4	5			5	6	6
	F_k	mm	2.3-0.2	2.3-0.15	2.3-0.2		2.3-0.15	4-0.2			4-0.2	5-0.2	5-0.2
	G	mm	76	100	100		112	144			144	148	162
	I³)	–	6	8	8		8	8			8	8	8
	K⁴)	–	M 8 x 18	M 10 x 22	M 12 x 25		M 14 x 28	M 16 x 35			M 16 x 40	M 18 x 40	M 18 x 45
	L¹⁰)	mm	10	11	14		20	18			18	21	21
	G_k¹²)	kg	4.7	7.5	10.6		16.4	34			36	40	49
Ta Nut		Nm	35	69	120		190	295			295	405	405
Extension ⁵)		Nr.	2.365/13 M	2.365/17M	2.365/19 M		22 M	24 R			24 R	27 R	27 R
Ta Splindle		Nm	30	45	80		100	190			190	220	220
Socket wrench ⁶)		Nr.	1/2″ D 19 SW 13		1/2″ D 19 SW 17			1/2″ D 19 SW 22

ตารางสเปค 230 (Specification 230)

Coupling size			230.60		230.65		230.70		230.75		230.80
Shaft connection			390.60	392.60	390.65	392.65	390.70	392.70	390.75	393.75	390.80	393.80
Model	–	Nr.	000	001	000	001	000	001	000	001	000	001
	A	mm	285	285	315	315	350	350	390	390	435	435
	B	mm	245	245	280	282	310	310	345	345	385	385
	C¹)	mm	175	125	175	130	220	155	250	170	280	190
	C_k¹¹)	mm	175	125	175	130	220	155	250	170	280	190
	D²)	mm	64	64	66	66	72	72	82	82	92	92
	F	mm	7	7	7	8	8	8	8	8	10	10
	F_k	mm	6-0.2	6-0.5	6-0.2	7-0.5	7-0.3	7-0.5	7-0.2	7-0.5	9-0.5	9-0.5
	G	mm	160	174	172	192	184	204	196	220	226	246
	I³)	–	8	8	8	10	10	10	10	10	10	16
	K⁴)	–	M 20 x 45	M 20 x 55	M 22 x 50	M 22 x 60	M 22 x 50	M 22 x 60	M 24 x 55	M 24 x 70	M 24 x 65	M 24 x 75
	L¹⁰)	mm	23	23	25	25	25	25	27	27	30	30
	G_k¹²)	kg	66	71	83	95	110	120	143	150	210	230
Ta Nut		Nm	580	580	780	780	780	780	1,000	1,000	1,500	1,500
Extension ⁵)		Nr.	30 R	30 R	32 R	32 R	32 R	32 R	36 R	36 R	41 R	41 R
Ta Splindle		Nm	290	290	400	400	550	550	680	680	950⁹)	950⁹)
Socket wrench ⁶)		Nr.	3/4″ D 32 SW 22		3/4″ D 32 SW 27		3/4″ D 32 SW 27		3/4″ D 32 SW 32		3/4″ D 32 SW 36
X = 4 spannersh ⁸)		Nr.			–		–				TD 750

Spigot fit H7
Disengaging movement for separation of the coupling
Number of stud bolts per flange
Dimensions of the bolt connections Stud bolt DIN 938 Self-locking hexagon nut DIN 980
Jaw or ring extension in accordance with Dana standard N 4.2.5
Gedore socket spanner set for tightening the spindle
Rahsol torque meter
Force multiplier spanner x = 4 (TD 750)
Adjusting moment of the torque wrench 756 C = 238 Nm
Thread depth
Fit h6 up to series 390 | Fit f8 for series 392/393
Gk = Weight of coupling Ta = Tightening torques of flang