EBARA Water Pump - 2CDX Centrifugal
EBARA Water Pump – 2CDX Centrifugal
Feature | Water Pump – 2CDX Centrifugal
ปั๊มหอยโข่งใบพัดคู่พร้อมส่วนประกอบไฮดรอลิกที่สร้างด้วยสแตนเลส AISI 304 เหมาะสำหรับการเพิ่มแรงดันการจ่ายการบำบัดและการชลประทานระบบปรับอากาศและการสูบน้ำทั่วไปรวมถึงของเหลวที่มีฤทธิ์รุนแรงปานกลาง
Code Type | Water Pump – 2CDX Centrifugal
Specifications | Water Pump – 2CDX Centrifugal
| PUMP | ||
|---|---|---|
| Liquid Handled | Type of liquid | Clean water |
| Max temperature [°C] | min. -5 max. +60 (Standard – L version – E – Q1AEGG – VAEGG – U3U3EGG – Q1U3EGG – U3CEGG) max. +110 (CDXH and CDXHS) |
|
| Maximum working pressure [MPa] | 0.8 | |
| Construction | Impeller | Closed centridugal type (Twin) |
| Shaft seal type | Mechanical seal | |
| Bearing | Sealed ball bearing | |
| Pipe Connection | Suction [inch] | from G11/4 to G11/2 (2CDX 200) UNI ISO 228-1 |
| Discharge [inch] | G1″ UNI ISO 228-1 | |
| Material | Casing | EN 1.4301 (AISI 304) – (AISI 316L only for “L” version) |
| Impeller | EN 1.4301 (AISI 304) – (AISI 316L only for “L” version) | |
| Casing cover | EN 1.4301 (AISI 304) – (AISI 316L only for “L” version) | |
| Shaft seal | Ceramic / Carbon / NBR for version see page 302) | |
| Shaft | AISI 304 / AISI 316L (Wet extension) | |
| Bracket | Aluminium (up to 1.5 kW included) Cast iron (2.2 kW and above) |
|
| Diffuser | AISI 304 / AISI 316L | |
| Applicable standard of test | ISO 9906:2012 – Grade 3B | |
| MOTOR | |||
|---|---|---|---|
| Type | Electric – TEFC | ||
| Single Phase | Three Phase | ||
| Efficiency level (Reg. 640/2009) | – | IE3 from 0.75 up to 4.0 kW | |
| No. of Poles | 2 | ||
| Rotation Speed | [min-1] | ~ 2800 | |
| Insulation Class | F | ||
| Protection degree (CEI EN 60034-5) | IP 55 | ||
| Power rating | [kW] | 0.75 ÷ 2.2 | 0.75 ÷ 3.7 |
| [HP] | 1 ÷ 2 | 1 ÷ 5 | |
| Frequency | [Hz] | 50 | |
| Voltage | [V] | 230 ±10% | 230/400 ±10% |
| Capacitor | Built in | – | |
| Over load protection | Built in | Provided by the user | |
| Casing material | Aluminium | ||
| Base material | Aluminium | ||
| Dimensions of cable entry | PG11 – P13.5 – M16x1.5 – M20x1.5 (see diamensions table page 400) |
||
Section Chart | Water Pump – CDX Centrifugal
| CDX Centrifugal | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Type Pumps | Power | Q=Capacity | |||||||||||
| Single Phase | Three Phase | [kW] | [HP] | l/min | 0 | 20 | 40 | 60 | 80 | 120 | 150 | 180 | 210 |
| m3/h | 0 | 1.2 | 2.4 | 3.6 | 4.8 | 7.2 | 9.0 | 10.8 | 12.6 | ||||
| 2CDXM 70/10 | 2CDX 70/10 | 0.75 | 1 | Unit | 41 | 38.5 | 35.3 | 31.5 | 27 | – | – | – | – |
| 2CDXM 70/12 | 2CDX 70/12 | 0.9 | 1.2 | 48 | 44.5 | 40.3 | 35.5 | 30 | – | – | – | – | |
| 2CDXM 70/15 | 2CDX 70/15 | 1.1 | 1.5 | 56 | 52.2 | 48 | 42.8 | 36.5 | – | – | – | – | |
| 2CDXM 70/20 | 2CDX 70/20 | 1.5 | 2 | 64 | 60 | 55.6 | 50.4 | 44 | – | – | – | – | |
| 2CDXM 120/15 | 2CDX 120/15 | 1.1 | 1.5 | 46 | – | 42 | 41 | 39.5 | 35 | 30 | – | – | |
| 2CDXM 120/20 | 2CDX 120/20 | 1.5 | 2 | 55 | – | 51.5 | 49.5 | 47.4 | 41.8 | 36.5 | – | – | |
| – | 2CDX 120/30 | 2.2 | 3 | 63 | – | 59 | 57 | 54.6 | 49.2 | 44 | – | – | |
| – | 2CDX 120/40 | 3 | 4 | 71.5 | – | 68.5 | 66.5 | 64 | 58 | 52 | – | – | |
| – | 2CDX 200/30 | 2.2 | 3 | 55 | – | – | 52 | 50.8 | 48.1 | 45.5 | 42.7 | 39.5 | |
| – | 2CDX 200/40 | 3 | 4 | 66 | – | – | 62.5 | 61.1 | 58 | 55.2 | 52.3 | 49 | |
| – | 2CDX 200/50 | 3.7 | 5 | 75 | – | – | 71.5 | 70.1 | 67 | 64.3 | 61.2 | 57.5 | |
ติดต่อแผนก Automation & Robots
