EBARA Water Pump - CM (A-B-C-D) Centrifugal
EBARA Water Pump – CM (A-B-C-D) Centrifugal
Feature | Water Pump – CM (A-B-C-D) Centrifugal
ปั๊มหอยโข่งใบพัดเดี่ยวผลิตเหล็กหล่อเหมาะสำหรับการเพิ่มแรงดันของน้ำเพื่อการชลประทาน และของเหลวที่ไม่มีการกัดกร่อนรุนแรงสำหรับการใช้งานทั่วไปและในอุตสาหกรรม ซีรีส์ CMR ติดตั้งใบพัดแบบเปิดสำหรับการจัดการสารแขวนลอย
Code Type | Water Pump – CM (A-B-C-D) Centrifugal
Specifications | Water Pump – CM (A-B-C-D) Centrifugal
| PUMP | ||
|---|---|---|
| Liquid Handled | Type of liquid | Clean water |
| Max temperature [°C] | min. -5 max. +40 (CMA up to 1.00) max. +90 (the other) |
|
| Maximum working pressure [MPa] | 0.6 (CMA up to 1.00; CMB up to 3.00; CMC; CMD) 0.8 (the other) |
|
| Construction | Impeller | Closed centrifugal |
| Shaft seal type | Mechanical seal | |
| Bearing | Sealed ball bearing | |
| Pipe Connection | Suction [inch] | G 1″ (CMA up to 1.00) UNI ISO 228 G 1″1/4 (CMA 1.50 and above) UNI ISO 228 G 2″ (CMB – CMC) UNI ISO 228 G 2″1/2 (CMD) UNI ISO 228 |
| Discharge [inch] | G 1″ (CMA) UNI ISO 228 G 1″1/4 (CMB) UNI ISO 228 G 2″ (CMC) UNI ISO 228 G 2″1/2 (CMD) UNI ISO 228 |
|
| Material | Casing | Cast iron |
| Impeller | PPE+PS glass fibre reinforced – Brass – Cast iron see application page 301-303 | |
| Shaft seal | Ceramic / Carbon / NBR | |
| Shaft | AISI 416 (integral) AISI 303 (wet extension) AISI 304 (wet extension) see application page 301 – 303 |
|
| Bracket | Cast iron – Aluminium see application page 301 – 303 | |
| Casing cover | AISI 304 see applicatino page 301 – 303 | |
| Applicable standard of test | ISO 9906:2012 – Grade 3B | |
| MOTOR | |||
|---|---|---|---|
| Type | Electric – TEFC | ||
| Single Phase | Three Phase | ||
| Efficiency level (Reg. 640/2009) | – | – from 0.37 up to 0.6 kW IE2 from 0.75 up to 4.0 kW IE3 from 0.75 up to 4.0 kW |
|
| No. of Poles | 2 | ||
| Rotation Speed | [min-1] | ~ 2800 | |
| Insulation Class | F | ||
| Protection degree (CEI EN 60034-5) | IP 44 | ||
| Power rating | [kW] | 0.37 ÷ 1.5 | 3.7 ÷ 4 |
| [HP] | 0.5 ÷ 2 | 0.5 ÷ 5.5 | |
| Frequency | [Hz] | 50 | |
| Voltage | [V] | 230 ±10% | 230/400 ±10% |
| Capacitor | Built in | – | |
| Over load protection | Built in | Provided by the user | |
| Casing material | Aluminium | ||
| Base material / motor support | Aluminium / Cast in / Plastic foot | ||
| Dimensions of cable entry | PG11 – P13.5 – M16x1.5 – M20x1.5 (see diamensions table page 401) |
||
Section Chart | Water Pump – CM (A-B-C-D) Centrifugal
| CMA | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Type Pumps | Power | Q=Capacity H = Total manometric head in meters |
|||||||||||||
| Single Phase | Three Phase | [kW] | [HP] | l/min | 0 | 20 | 40 | 60 | 80 | 85 | 90 | 95 | 110 | 120 | 140 |
| m3/h | 0 | 1.2 | 2.4 | 3.6 | 4.8 | 5.1 | 5.4 | 5.7 | 6.6 | 7.2 | 8.4 | ||||
| CMA 0.50 M | CMA 0.50 T | 0.37 | 0.5 | Unit | 21.7 | 20.9 | 19.5 | 17.6 | 14.9 | 14.0 | 13.1 | – | – | – | – |
| CMA 0.75 M | CMA 0.75 T | 0.55 | 0.75 | 31.6 | 29.7 | 27.8 | 24.9 | 21.1 | 20.2 | – | – | – | – | – | |
| CMA 1.00 M | CMA 1.00 T | 0.75 | 1 | 33.6 | 33.0 | 31.9 | 29.9 | 26.6 | 25.6 | 24.6 | 23.5 | – | – | – | |
| CMA 1.50 M | CMA 1.50 T | 1.1 | 1.5 | 39.8 | 39.5 | 39.0 | 38.3 | 37.0 | 36.5 | 36.1 | 35.6 | 34.5 | – | – | |
| CMA 2.00 M | CMA 2.00 T | 1.5 | 2 | 48 | 47.5 | 47 | 46 | 45 | 45 | 44.5 | 44 | 43 | 42 | – | |
| – | CMA 3.00 T | 2.2 | 3 | 53.5 | 53 | 52.5 | 51 | 49.5 | 49 | 49 | 48.5 | 46.5 | 45.5 | 42.5 | |
| CMB | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Type Pumps | Power | Q=Capacity H = Total manometric head in meters |
|||||||||
| Single Phase | Three Phase | [kW] | [HP] | l/min | 0 | 100 | 150 | 200 | 250 | 280 | |
| m3/h | 0 | 6.0 | 9.0 | 12.0 | 15.1 | 16.9 | |||||
| CMB 0.75 M | CMB 0.75 T | 0.55 | 0.75 | Unit | 14.9 | 14.6 | 13.2 | 10.9 | 8.1 | – | |
| CMB 1.00 M | CMB 1.00 T | 0.75 | 1 | 18.7 | 18.6 | 17.5 | 15.7 | 13.1 | – | ||
| CMB 1.50 M | CMB 1.50 T | 1.1 | 1.5 | 22.4 | 22.5 | 21.6 | 20 | 17.8 | 16.2 | ||
| CMB 2.00 M | CMB 2.00 T | 1.5 | 2 | 30.6 | 30.8 | 29.7 | 28.0 | 25.4 | 23.6 | ||
| – | CMB 3.00 T | 2.2 | 3 | 35.3 | 35.4 | 34.4 | 32.7 | 30.2 | 28.5 | ||
| – | CMB 4.00 T | 3 | 4 | 46.5 | 45.5 | 44 | 42 | 37.8 | 36.2 | ||
| – | CMB 5.50 T | 4 | 5.5 | 57 | 57 | 56 | 53.5 | 50.5 | 48 | ||
| CMC | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Type Pumps | Power | Q=Capacity H = Total manometric head in meters |
||||||||||
| Single Phase | Three Phase | [kW] | [HP] | l/min | 0 | 50 | 100 | 200 | 300 | 400 | 450 | |
| m3/h | 0 | 3.0 | 6.0 | 12.0 | 18.1 | 24.1 | 27.1 | |||||
| CMC 0.75 M | CMC 0.75 T | 0.55 | 0.75 | Unit | 12 | 12 | 11.9 | 10.7 | 8.3 | 5.2 | – | |
| CMC 1.00 M | CMC 1.00 T | 0.75 | 1 | 14 | 14 | 14 | 13.1 | 10.8 | 7.4 | 5.4 | ||
| CMD | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Type Pumps | Power | Q=Capacity H = Total manometric head in meters |
|||||||||||
| Single Phase | Three Phase | [kW] | [HP] | l/min | 0 | 300 | 400 | 600 | 800 | 900 | 950 | 1000 | |
| m3/h | 0 | 18.1 | 24.1 | 36.1 | 48.2 | 54.2 | 57.2 | 60.2 | |||||
| CMD 1.50 M | CMD 1.50 T | 1.1 | 1.5 | Unit | 11.5 | 11.3 | 11 | 9.8 | 7.8 | 6.5 | – | – | |
| CMD 2.00 M | CMD 2.00 T | 1.5 | 2 | 13.2 | 13.1 | 12.9 | 12 | 10.2 | 9 | 8.4 | – | ||
| – | CMD 3.00 T | 2.2 | 3 | 15.9 | 16.1 | 15.8 | 15 | 13.1 | 11.9 | 11.2 | 10.4 | ||
ติดต่อแผนก Automation & Robots
