Add to wishlist
3G3RX2
3G3RX2
3G3RX2
3G3RX2

OMRON Motion Drive Inverter – 3G3RX2

    อินเวอร์เตอร์อเนกประสงค์คุณภาพสูงง่ายในติดตั้งและเปลี่ยนแปลงมี EMC Filter ติดตั้งมาแล้วตั้งค่าและเข้าถึงได้ง่ายผ่านจอ LCD

    button

    Category:

      OMRON Motion Drive Inverter - 3G3RX2

      3G3RX2 (1)
      OMRON Motion Drive Inverter – 3G3RX2

      Model Numbers | Motion Drive Inverter – 3G3RX2

      RX2 series Inverter Models

      Rated voltage Enclosure ratings Max. applicable motor capacity Model
      Normal Duty (ND) Low Duty (LD) /
      Very Low Duty (VLD)
      3-phase 200 VAC IP20 0.4 kW 0.75 kW 3G3RX2-A2004
      0.75 kW 1.5 kW 3G3RX2-A2007
      1.5 kW 2.2 kW 3G3RX2-A2015
      2.2 kW 3.7 kW 3G3RX2-A2022
      3.7 kW 5.5 kW 3G3RX2-A2037
      5.5 kW 7.5 kW 3G3RX2-A2055
      7.5 kW 11 kW 3G3RX2-A2075
      11 kW 15 kW 3G3RX2-A2110
      15 kW 18.5 kW 3G3RX2-A2150
      18.5 kW 22 kW 3G3RX2-A2185
      22 kW 30 kW 3G3RX2-A2220
      30 kW 37 kW 3G3RX2-A2300
      37 kW 45 kW 3G3RX2-A2370
      45 kW 55 kW 3G3RX2-A2450
      55 kW 75 kW 3G3RX2-A2550
      3-phase 400 VAC IP20 0.75 kW 1.5 kW 3G3RX2-A4007
      1.5 kW 2.2 kW 3G3RX2-A4015
      2.2 kW 3.7 kW 3G3RX2-A4022
      3.7 kW 5.5 kW 3G3RX2-A4037
      5.5 kW 7.5 kW 3G3RX2-A4055
      7.5 kW 11 kW 3G3RX2-A4075
      11 kW 15 kW 3G3RX2-A4110
      15 kW 18.5 kW 3G3RX2-A4150
      18.5 kW 22 kW 3G3RX2-A4185
      22 kW 30 kW 3G3RX2-A4220
      30 kW 37 kW 3G3RX2-A4300
      37 kW 45 kW 3G3RX2-A4370
      45 kW 55 kW 3G3RX2-A4450
      55 kW 75 kW 3G3RX2-A4550
      IP00 75 kW 90 kW 3G3RX2-B4750
      90 kW 110 kW 3G3RX2-B4900
      110 kW 132 kW 3G3RX2-B411K
      132 kW 160 kW 3G3RX2-B413K

      Related Options

      Name Specifications Model
      Regenerative
      Braking Units      		 3-phase 200 VAC General purpose with Braking resistor 3G3AX-RBU21
      High Regeneration purpose with Braking resistor 3G3AX-RBU22
      General purpose for 30 kW * 3G3AX-RBU23
      General purpose for 55 kW * 3G3AX-RBU24
      3-phase 400 VAC General purpose with Braking resistor 3G3AX-RBU41
      General purpose for 30 kW * 3G3AX-RBU42
      General purpose for 55 kW * 3G3AX-RBU43
      Braking Resistor Compact type Resistor 120 W, 180 Ω 3G3AX-RBA1201
      Resistor 120 W, 100 Ω 3G3AX-RBA1202
      Resistor 120 W, 50 Ω 3G3AX-RBA1203
      Resistor 120 W, 35 Ω 3G3AX-RBA1204
      Standard type Resistor 200 W, 180 Ω 3G3AX-RBB2001
      Resistor 200 W, 100 Ω 3G3AX-RBB2002
      Resistor 300 W, 50 Ω 3G3AX-RBB3001
      Resistor 400 W, 35 Ω 3G3AX-RBB4001
      Medium capacity type Resistor 400 W, 50 Ω 3G3AX-RBC4001
      Resistor 600 W, 35 Ω 3G3AX-RBC6001
      Resistor 1200 W, 17 Ω 3G3AX-RBC12001

      * The braking resistor is optionally required.

      Regenerative Braking Unit and Braking Resistor Combination

      Select the combination of the regenerative braking unit(s) and the braking resistor(s) as follows, according to your inverter. If the usage rate exceeds 10% ED, or if you need a torque larger than the approximate braking torque, you need to follow the instruction provided in Braking Resistor Selection.
      • Inverter: Select the model of your inverter. The table below assumes that your inverter is used in the heavy load mode and
      connected to a single motor with the same capacity. Make sure that the approximate braking torque in the table
      shows the assumed value per a motor with the same capacity at ND mode. When using this inverter at LD or VLD
      mode, you need to calculate the torque value by dividing VLD by ND.
      • Operating conditions: Show the torque during deceleration and the deceleration time (in % ED) calculated as a percentage
      of the cycle time for 1 cycle of operation including the stop time.
      • Braking unit/Breaking resistor: Show the required the model and number of units.
      • Connection form: Show the configuration of the regenerative braking unit(s) and braking resistor(s) illustrated in the
      connection form table below.
      • Restrictions: Show the maximum deceleration time allowable for the combination shown here and the minimum resistance
      that can be connected to the inverter’s built-in regenerative braking circuit or external regenerative braking unit(s).

      3G3RX2 Lineup 4

      Connection configuration

      3G3RX2 Lineup 5
      3G3RX2 Lineup 6

      Name Model
      Radio Noise Filter 3G3AX-ZCL2
      3G3AX-ZCL1
      Name Inverter Model
      Voltage
      class      		 Max. applicable
      motor capacity
      [kW]      		 Model Load
      specification
      selection      		 Max. applicable
      motor capacity
      [kW]      		 Rated input
      current
      [A]
      Input
      Noise
      Filter      		 200-V
      class      		 0.4 3G3RX2-A2004 ND 0.4 3.3 3G3AX-NFI21
      LD 0.75 3.9
      VLD 0.75 3.9
      0.75 3G3RX2-A2007 ND 0.75 5.5
      LD 1.5 7.2 3G3AX-NFI22
      VLD 1.5 7.2
      1.5 3G3RX2-A2015 ND 1.5 8.3
      LD 2.2 10.8 3G3AX-NFI23
      VLD 2.2 10.8
      2.2 3G3RX2-A2022 ND 2.2 12
      LD 3.7 13.9
      VLD 3.7 13.9
      3.7 3G3RX2-A2037 ND 3.7 18
      LD 5.5 23 3G3AX-NFI24
      VLD 5.5 23
      5.5 3G3RX2-A2055 ND 5.5 26
      LD 7.5 37 3G3AX-NFI25
      VLD 7.5 37
      7.5 3G3RX2-A2075 ND 7.5 35
      LD 11 48 3G3AX-NFI26
      VLD 11 48
      11 3G3RX2-A2110 ND 11 51
      LD 15 64 3G3AX-NFI27
      VLD 15 64
      15 3G3RX2-A2150 ND 15 70
      LD 18.5 80 3G3AX-NFI28
      VLD 18.5 80
      18.5 3G3RX2-A2185 ND 18.5 84
      LD 22 94 3G3AX-NFI29
      VLD 22 94
      22 3G3RX2-A2220 ND 22 105
      LD 30 120
      VLD 30 120
      30 3G3RX2-A2300 ND 30 133
      LD 37 150 3G3AX-NFI2A
      VLD 37 150
      37 3G3RX2-A2370 ND 37 160
      LD 45 186 3G3AX-NFI2B
      VLD 45 186
      45 3G3RX2-A2450 ND 45 200
      LD 55 240 3G3AX-NFI2C
      VLD 55 240
      55 3G3RX2-A2550 ND 55 242
      LD 75 280 —
      VLD 75 280
      400-V
      class      		 0.75 3G3RX2-A4007 ND 0.75 2.8 3G3AX-NFI41
      LD 1.5 4.3
      VLD 1.5 4.3
      1.5 3G3RX2-A4015 ND 1.5 4.2
      LD 2.2 5.9
      VLD 2.2 5.9
      2.2 3G3RX2-A4022 ND 2.2 5.8
      LD 3.7 8.1 3G3AX-NFI42
      VLD 3.7 8.1
      3.7 3G3RX2-A4037 ND 3.7 9.8
      LD 5.5 13.3 3G3AX-NFI43
      VLD 5.5 13.3
      5.5 3G3RX2-A4055 ND 5.5 15
      LD 7.5 20
      VLD 7.5 20
      7.5 3G3RX2-A4075 ND 7.5 21
      LD 11 24 3G3AX-NFI44
      VLD 11 24
      11 3G3RX2-A4110 ND 11 28
      LD 15 32 3G3AX-NFI45
      VLD 15 32
      15 3G3RX2-A4150 ND 15 35
      LD 18.5 41 3G3AX-NFI46
      VLD 18.5 41
      18.5 3G3RX2-A4185 ND 18.5 42
      LD 22 47 3G3AX-NFI47
      VLD 22 47
      22 3G3RX2-A4220 ND 22 53
      LD 30 63 3G3AX-NFI48
      VLD 30 63
      30 3G3RX2-A4300 ND 30 64
      LD 37 77 3G3AX-NFI49
      VLD 37 77
      37 3G3RX2-A4370 ND 37 83
      LD 45 94 3G3AX-NFI4A
      VLD 45 94
      45 3G3RX2-A4450 ND 45 100
      LD 55 116
      VLD 55 116
      55 3G3RX2-A4550 ND 55 121
      LD 75 149 —
      VLD 75 149
      Name Inverter Model
      Voltage
      class      		 Max. applicable
      motor capacity
      [kW]      		 Model Load
      specification
      selection      		 Max. applicable
      motor capacity
      [kW]      		 Rated input
      current
      [A]
      EMC
      Noise
      Filter *      		 200-V
      class      		 0.4 3G3RX2-A2004 ND 0.4 3.3 3G3AX-EFI41
      LD 0.75 3.9
      VLD 0.75 3.9
      0.75 3G3RX2-A2007 ND 0.75 5.5
      LD 1.5 7.2 3G3AX-EFI42
      VLD 1.5 7.2
      1.5 3G3RX2-A2015 ND 1.5 8.3
      LD 2.2 10.8 3G3AX-EFI43
      VLD 2.2 10.8
      2.2 3G3RX2-A2022 ND 2.2 12
      LD 3.7 13.9
      VLD 3.7 13.9
      3.7 3G3RX2-A2037 ND 3.7 18
      LD 5.5 23 3G3AX-EFI44
      VLD 5.5 23
      5.5 3G3RX2-A2055 ND 5.5 26
      LD 7.5 37 3G3AX-EFI45
      VLD 7.5 37
      7.5 3G3RX2-A2075 ND 7.5 35
      LD 11 48 3G3AX-EFI47
      VLD 11 48
      11 3G3RX2-A2110 ND 11 51
      LD 15 64 3G3AX-EFI48
      VLD 15 64
      15 3G3RX2-A2150 ND 15 70
      LD 18.5 80 3G3AX-EFI49
      VLD 18.5 80
      18.5 3G3RX2-A2185 ND 18.5 84
      LD 22 94 3G3AX-EFI4A
      VLD 22 94
      22 3G3RX2-A2220 ND 22 105
      LD 30 120
      VLD 30 120
      30 3G3RX2-A2300 ND 30 133
      LD 37 150 3G3AX-EFI4B
      VLD 37 150
      37 3G3RX2-A2370 ND 37 160
      LD 45 186 —
      VLD 45 186
      400-V
      class      		 0.75 3G3RX2-A4007 ND 0.75 2.8 3G3AX-EFI41
      LD 1.5 4.3
      VLD 1.5 4.3
      1.5 3G3RX2-A4015 ND 1.5 4.2
      LD 2.2 5.9
      VLD 2.2 5.9
      2.2 3G3RX2-A4022 ND 2.2 5.8
      LD 3.7 8.1 3G3AX-EFI42
      VLD 3.7 8.1
      3.7 3G3RX2-A4037 ND 3.7 9.8
      LD 5.5 13.3 3G3AX-EFI43
      VLD 5.5 13.3
      5.5 3G3RX2-A4055 ND 5.5 15
      LD 7.5 20
      VLD 7.5 20
      7.5 3G3RX2-A4075 ND 7.5 21
      LD 11 24 3G3AX-EFI44
      VLD 11 24
      11 3G3RX2-A4110 ND 11 28
      LD 15 32 3G3AX-EFI45
      VLD 15 32
      15 3G3RX2-A4150 ND 15 35
      LD 18.5 41 3G3AX-EFI46
      VLD 18.5 41
      18.5 3G3RX2-A4185 ND 18.5 42
      LD 22 47 3G3AX-EFI47
      VLD 22 47
      22 3G3RX2-A4220 ND 22 53
      LD 30 63 3G3AX-EFI48
      VLD 30 63
      30 3G3RX2-A4300 ND 30 64
      LD 37 77 3G3AX-EFI49
      VLD 37 77
      37 3G3RX2-A4370 ND 37 83
      LD 45 94 3G3AX-EFI4A
      VLD 45 94
      45 3G3RX2-A4450 ND 45 100
      LD 55 116
      VLD 55 116
      55 3G3RX2-A4550 ND 55 121
      LD 75 149 3G3AX-EFI4B
      VLD 75 149
      75 3G3RX2-B4750 ND 75 164
      LD 90 176
      VLD 90 176
      90 3G3RX2-B4900 ND 90 194
      LD 110 199 —
      VLD 110 199

      * Although an EMC Noise Filter is built into the RX2, it may be necessary to provide another EMC Noise Filter when the
      cable between the Motor and the Inverter is long.

      Name Inverter Model
      Voltage
      class      		 Max. applicable
      motor capacity
      [kW]      		 Model Load
      specification
      selection      		 Max. applicable
      motor capacity
      [kW]      		 Rated
      input
      current
      [A]
      Output
      Noise
      Filter      		 200-V
      class      		 0.4 3G3RX2-A2004 ND 0.4 3 3G3AX-NFO01
      LD 0.75 3.7
      VLD 0.75 3.7
      0.75 3G3RX2-A2007 ND 0.75 5
      LD 1.5 6.3 3G3AX-NFO02
      VLD 1.5 6.3
      1.5 3G3RX2-A2015 ND 1.5 7.5
      LD 2.2 9.4
      VLD 2.2 9.4
      2.2 3G3RX2-A2022 ND 2.2 10.5
      LD 3.7 12 3G3AX-NFO03
      VLD 3.7 12
      3.7 3G3RX2-A2037 ND 3.7 16.5
      LD 5.5 19.6
      VLD 5.5 19.6
      5.5 3G3RX2-A2055 ND 5.5 24
      LD 7.5 30 3G3AX-NFO04
      VLD 7.5 30
      7.5 3G3RX2-A2075 ND 7.5 32
      LD 11 44
      VLD 11 44
      11 3G3RX2-A2110 ND 11 46
      LD 15 58 3G3AX-NFO05
      VLD 15 58
      15 3G3RX2-A2150 ND 15 64
      LD 18.5 73 3G3AX-NFO06
      VLD 18.5 73
      18.5 3G3RX2-A2185 ND 18.5 76
      LD 22 85
      VLD 22 85
      22 3G3RX2-A2220 ND 22 95
      LD 30 113 3G3AX-NFO07
      VLD 30 113
      30 3G3RX2-A2300 ND 30 121
      LD 37 140
      VLD 37 140
      37 3G3RX2-A2370 ND 37 145
      LD 45 169 —
      VLD 45 169
      400-V
      class      		 0.75 3G3RX2-A4007 ND 0.75 2.5 3G3AX-NFO01
      LD 1.5 3.1
      VLD 1.5 3.1
      1.5 3G3RX2-A4015 ND 1.5 3.8
      LD 2.2 4.8
      VLD 2.2 4.8
      2.2 3G3RX2-A4022 ND 2.2 5.3
      LD 3.7 6.7 3G3AX-NFO02
      VLD 3.7 6.7
      3.7 3G3RX2-A4037 ND 3.7 9
      LD 5.5 11.1 3G3AX-NFO03
      VLD 5.5 11.1
      5.5 3G3RX2-A4055 ND 5.5 14
      LD 7.5 16
      VLD 7.5 16
      7.5 3G3RX2-A4075 ND 7.5 19
      LD 11 22
      VLD 11 22
      11 3G3RX2-A4110 ND 11 25
      LD 15 29 3G3AX-NFO04
      VLD 15 29
      15 3G3RX2-A4150 ND 15 32
      LD 18.5 37
      VLD 18.5 37
      18.5 3G3RX2-A4185 ND 18.5 38
      LD 22 43
      VLD 22 43
      22 3G3RX2-A4220 ND 22 48
      LD 30 57 3G3AX-NFO05
      VLD 30 57
      30 3G3RX2-A4300 ND 30 58
      LD 37 70
      VLD 37 70
      37 3G3RX2-A4370 ND 37 75
      LD 45 85 3G3AX-NFO06
      VLD 45 85
      45 3G3RX2-A4450 ND 45 91
      LD 55 105 3G3AX-NFO07
      VLD 55 105
      55 3G3RX2-A4550 ND 55 112
      LD 75 135
      VLD 75 135
      75 3G3RX2-B4750 ND 75 149
      LD 90 160 —
      VLD 90 160
      Name Inverter Model
      Voltage
      class      		 Max. applicable
      motor capacity
      [kW]      		 Model Load
      specification
      selection      		 Max. applicable
      motor capacity
      [kW]      		 Rated
      input
      current
      [A]
      DC
      Reactor      		 200-V
      class      		 0.4 3G3RX2-A2004 ND 0.4 3.3 3G3AX-DL2004
      LD 0.75 3.9 3G3AX-DL2007
      VLD 0.75 3.9
      0.75 3G3RX2-A2007 ND 0.75 5.5
      LD 1.5 7.2 3G3AX-DL2015
      VLD 1.5 7.2
      1.5 3G3RX2-A2015 ND 1.5 8.3
      LD 2.2 10.8 3G3AX-DL2022
      VLD 2.2 10.8
      2.2 3G3RX2-A2022 ND 2.2 12
      LD 3.7 13.9 3G3AX-DL2037
      VLD 3.7 13.9
      3.7 3G3RX2-A2037 ND 3.7 18
      LD 5.5 23 3G3AX-DL2055
      VLD 5.5 23
      5.5 3G3RX2-A2055 ND 5.5 26
      LD 7.5 37 3G3AX-DL2075
      VLD 7.5 37
      7.5 3G3RX2-A2075 ND 7.5 35
      LD 11 48 3G3AX-DL2110
      VLD 11 48
      11 3G3RX2-A2110 ND 11 51
      LD 15 64 3G3AX-DL2150
      VLD 15 64
      15 3G3RX2-A2150 ND 15 70
      LD 18.5 80 3G3AX-DL2220
      VLD 18.5 80
      18.5 3G3RX2-A2185 ND 18.5 84
      LD 22 94
      VLD 22 94
      22 3G3RX2-A2220 ND 22 105
      LD 30 120 3G3AX-DL2300
      VLD 30 120
      30 3G3RX2-A2300 ND 30 133
      LD 37 150 3G3AX-DL2370
      VLD 37 150
      37 3G3RX2-A2370 ND 37 160
      LD 45 186 3G3AX-DL2450
      VLD 45 186
      45 3G3RX2-A2450 ND 45 200
      LD 55 240 3G3AX-DL2550
      VLD 55 240
      55 3G3RX2-A2550 ND 55 242
      LD 75 280 —
      VLD 75 280
      400-V
      class      		 0.75 3G3RX2-A4007 ND 0.75 2.8 3G3AX-DL4007
      LD 1.5 4.3 3G3AX-DL4015
      VLD 1.5 4.3
      1.5 3G3RX2-A4015 ND 1.5 4.2
      LD 2.2 5.9 3G3AX-DL4022
      VLD 2.2 5.9
      2.2 3G3RX2-A4022 ND 2.2 5.8
      LD 3.7 8.1 3G3AX-DL4037
      VLD 3.7 8.1
      3.7 3G3RX2-A4037 ND 3.7 9.8
      LD 5.5 13.3 3G3AX-DL4055
      VLD 5.5 13.3
      5.5 3G3RX2-A4055 ND 5.5 15
      LD 7.5 20 3G3AX-DL4075
      VLD 7.5 20
      7.5 3G3RX2-A4075 ND 7.5 21
      LD 11 24 3G3AX-DL4110
      VLD 11 24
      11 3G3RX2-A4110 ND 11 28
      LD 15 32 3G3AX-DL4150
      VLD 15 32
      15 3G3RX2-A4150 ND 15 35
      LD 18.5 41 3G3AX-DL4220
      VLD 18.5 41
      18.5 3G3RX2-A4185 ND 18.5 42
      LD 22 47
      VLD 22 47
      22 3G3RX2-A4220 ND 22 53
      LD 30 63 3G3AX-DL4300
      VLD 30 63
      30 3G3RX2-A4300 ND 30 64
      LD 37 77 3G3AX-DL4370
      VLD 37 77
      37 3G3RX2-A4370 ND 37 83
      LD 45 94 3G3AX-DL4450
      VLD 45 94
      45 3G3RX2-A4450 ND 45 100
      LD 55 116 3G3AX-DL4550
      VLD 55 116
      55 3G3RX2-A4550 ND 55 121
      LD 75 149 —
      VLD 75 149
      Name Inverter Model
      Voltage
      class      		 Max. applicable
      motor capacity
      [kW]      		 Model Load
      specification
      selection      		 Max. applicable
      motor capacity
      [kW]      		 Rated
      input
      current
      [A]
      AC
      Reactor      		 200-V
      class      		 0.4 3G3RX2-A2004 ND 0.4 3.3 3G3AX-AL2025
      LD 0.75 3.9
      VLD 0.75 3.9
      0.75 3G3RX2-A2007 ND 0.75 5.5
      LD 1.5 7.2
      VLD 1.5 7.2
      1.5 3G3RX2-A2015 ND 1.5 8.3
      LD 2.2 10.8 3G3AX-AL2055
      VLD 2.2 10.8
      2.2 3G3RX2-A2022 ND 2.2 12
      LD 3.7 13.9
      VLD 3.7 13.9
      3.7 3G3RX2-A2037 ND 3.7 18
      LD 5.5 23 3G3AX-AL2110
      VLD 5.5 23
      5.5 3G3RX2-A2055 ND 5.5 26
      LD 7.5 37
      VLD 7.5 37
      7.5 3G3RX2-A2075 ND 7.5 35
      LD 11 48 3G3AX-AL2220
      VLD 11 48
      11 3G3RX2-A2110 ND 11 51
      LD 15 64
      VLD 15 64
      15 3G3RX2-A2150 ND 15 70
      LD 18.5 80 3G3AX-AL2330
      VLD 18.5 80
      18.5 3G3RX2-A2185 ND 18.5 84
      LD 22 94
      VLD 22 94
      22 3G3RX2-A2220 ND 22 105
      LD 30 120 3G3AX-AL2500
      VLD 30 120
      30 3G3RX2-A2300 ND 30 133
      LD 37 150
      VLD 37 150
      37 3G3RX2-A2370 ND 37 160
      LD 45 186 3G3AX-AL2750
      VLD 45 186
      45 3G3RX2-A2450 ND 45 200
      LD 55 240
      VLD 55 240
      55 3G3RX2-A2550 ND 55 242
      LD 75 280 —
      VLD 75 280
      400-V
      class      		 0.75 3G3RX2-A4007 ND 0.75 2.8 3G3AX-AL4025
      LD 1.5 4.3
      VLD 1.5 4.3
      1.5 3G3RX2-A4015 ND 1.5 4.2
      LD 2.2 5.9 3G3AX-AL4055
      VLD 2.2 5.9
      2.2 3G3RX2-A4022 ND 2.2 5.8
      LD 3.7 8.1
      VLD 3.7 8.1
      3.7 3G3RX2-A4037 ND 3.7 9.8
      LD 5.5 13.3 3G3AX-AL4110
      VLD 5.5 13.3
      5.5 3G3RX2-A4055 ND 5.5 15
      LD 7.5 20
      VLD 7.5 20
      7.5 3G3RX2-A4075 ND 7.5 21
      LD 11 24 3G3AX-AL4220
      VLD 11 24
      11 3G3RX2-A4110 ND 11 28
      LD 15 32
      VLD 15 32
      15 3G3RX2-A4150 ND 15 35
      LD 18.5 41 3G3AX-AL4330
      VLD 18.5 41
      18.5 3G3RX2-A4185 ND 18.5 42
      LD 22 47
      VLD 22 47
      22 3G3RX2-A4220 ND 22 53
      LD 30 63 3G3AX-AL4500
      VLD 30 63
      30 3G3RX2-A4300 ND 30 64
      LD 37 77
      VLD 37 77
      37 3G3RX2-A4370 ND 37 83
      LD 45 94 3G3AX-AL4750
      VLD 45 94
      45 3G3RX2-A4450 ND 45 100
      LD 55 116
      VLD 55 116
      55 3G3RX2-A4550 ND 55 121
      LD 75 149 —
      VLD 75 149
      Name Specifications Model
      PG Option Unit For Position or Frequency Control 3G3AX-RX2-PG01
      Digital Operator
      Connecting Cable      		 RJ45 connector, EIA568-compliant cable (UTP category 5), Cable Length 1 m 3G3AX-OPCN1
      RJ45 connector, EIA568-compliant cable (UTP category 5), Cable Length 3 m 3G3AX-OPCN3

      Software

      FA Integrated Tool Package CX-One

      Product
      name      		 Specifications Model
      Number of
      licenses      		 Media
      FA Integrated
      Tool Package
      CX-One
      Ver.4.[]      		 The CX-One is a comprehensive software package that
      integrates Support Software for OMRON PLCs and
      components.
      CX-One runs on the following OS.
      Windows 7 (32-bit/64-bit version)/
      Windows 8 (32-bit/64-bit version) /
      Windows 8.1 (32-bit/64-bit version)/
      Windows 10 (32-bit/64-bit version)
      CX-One Version 4.[] includes CX-Drive Ver.3.[].
      For details, refer to the CX-One catalog (Cat. No. R134)      		 1 license
      *      		 DVD CXONE-AL01D-V4

      * Multi licenses (3, 10, 30, or 50 licenses) and DVD media without licenses are also available for the CX-One.
      Note: The RX2 Series is supported by CX-Drive version 3.0 or higher.

      ข้อมูลทางเทคนิค | Motion Drive Inverter – 3G3RX2

      Performance Specifications

      Inverter 3G3RX2

      3-phase 200-V Class

      Very Low Duty (VLD)/Low Duty (LD)/Normal Duty (ND)

      3G3RX2-A2[][][][][] A2004 A2007 A2015 A2022 A2037
      Applicable motor
      (4-pole) capacity (kW)      		 VLD 0.75 1.5 2.2 3.7 5.5
      LD 0.75 1.5 2.2 3.7 5.5
      ND 0.4 0.75 1.5 2.2 3.7
      Output Rated output
      current (A)      		 VLD 4.4 8.0 10.4 15.6 22.8
      LD 3.7 6.3 9.4 12.0 19.6
      ND 3.2 5.0 8.0 11.0 17.5
      Overload
      current rating      		 VLD 110% 60 sec / 120% 3 sec
      LD 120% 60 sec / 150% 3 sec
      ND 150% 60 sec / 200% 3 sec
      Rated output voltage 3-phase (3-wire) 200 to 240 V (depending on receiving voltage)
      Rated
      capacity
      (kVA)      		 200 V VLD 1.5 2.8 3.6 5.4 7.9
      LD 1.3 2.2 3.3 4.2 6.8
      ND 1.1 1.7 2.8 3.8 6.1
      240 V VLD 1.8 3.3 4.3 6.5 9.5
      LD 1.5 2.6 3.9 5.0 8.1
      ND 1.3 2.1 3.3 4.6 7.3
      Input Rated input
      current (A) *1      		 VLD 5.2 9.5 12.4 18.6 27.1
      LD 4.4 7.5 11.2 14.3 23.3
      ND 3.8 6.0 9.5 13.1 20.8
      Rated input AC voltage Control power supply: Power supply single phase 200 to 240 V/allowable
      variation range 170 to 264 V,
      50 Hz (allowable variation range: 47.5 to 52.5 Hz)/60 Hz (allowable variation
      range: 57 to 63 Hz)
      Main circuit power supply: 3-phase (3-wire) 200 to 240 V/allowable variation
      range 170 to 264 V,
      50 Hz (allowable variation range: 47.5 to 52.5 Hz)/60 Hz (allowable variation
      range: 57 to 63 Hz)
      Power supply
      equipment
      capacity (kVA) *2      		 VLD 2.0 3.6 4.7 7.1 10.3
      LD 1.7 2.9 4.3 5.4 8.9
      ND 1.5 2.3 3.6 5.0 7.9
      Carrier frequency operating
      range *3      		 VLD 0.5 to 10.0 kHz
      LD 0.5 to 12.0 kHz
      ND 0.5 to 16.0 kHz
      Motor start torque *4 200%/0.3 Hz
      Braking Regenerative braking Equipped with BRD circuit (with a discharging resistor separately installed)
      Minimum resistance that
      can be connected (Ω)      		 50 50 35 35 35
      Dimension Height (mm) 255 255 255 255 255
      Width (mm) 150 150 150 150 150
      Depth (mm) 140 140 140 140 140
      Protective construction IP20 *5 / UL open type
      Approximate mass (kg) 3 3 3 3 3
      3G3RX2-A2[][][][][] A2055 A2075 A2110 A2150 A2185
      Applicable motor
      (4-pole) capacity (kW)      		 VLD 7.5 11 15 18.5 22
      LD 7.5 11 15 18.5 22
      ND 5.5 7.5 11 15 18.5
      Output Rated output
      current (A)      		 VLD 33.0 46.0 60.0 80.0 93.0
      LD 30.0 40.0 56.0 73.0 85.0
      ND 25.0 32.0 46.0 64.0 76.0
      Overload
      current rating      		 VLD 110% 60 sec / 120% 3 sec
      LD 120% 60 sec / 150% 3 sec
      ND 150% 60 sec / 200% 3 sec
      Rated output voltage 3-phase (3-wire) 200 to 240 V (depending on receiving voltage)
      Rated
      capacity
      (kVA)      		 200 V VLD 11.4 15.9 20.8 27.7 32.2
      LD 10.4 13.9 19.4 25.3 29.4
      ND 8.7 11.1 15.9 22.2 26.3
      240 V VLD 13.7 19.1 24.9 33.3 38.7
      LD 12.5 16.6 23.3 30.3 35.3
      ND 10.4 13.3 19.1 26.6 31.6
      Input Rated input
      current (A) *1      		 VLD 39.3 54.8 71.4 95.2 110.7
      LD 35.7 47.6 66.7 86.9 101.2
      ND 29.8 38.1 54.8 76.2 90.5
      Rated input AC voltage Control power supply: Power supply single phase 200 to 240 V/allowable
      variation range 170 to 264 V,
      50 Hz (allowable variation range: 47.5 to 52.5 Hz)/60 Hz (allowable variation
      range: 57 to 63 Hz)
      Main circuit power supply: 3-phase (3-wire) 200 to 240 V/allowable variation
      range 170 to 264 V,
      50 Hz (allowable variation range: 47.5 to 52.5 Hz)/60 Hz (allowable variation
      range: 57 to 63 Hz)
      Power supply
      equipment
      capacity (kVA) *2      		 VLD 15.0 20.9 27.2 36.3 42.2
      LD 13.6 18.1 25.4 33.1 38.6
      ND 11.3 14.5 20.9 29.0 34.5
      Carrier frequency operating
      range *3      		 VLD 0.5 to 10.0 kHz
      LD 0.5 to 12.0 kHz
      ND 0.5 to 16.0 kHz
      Motor start torque *4 200%/0.3 Hz
      Braking Regenerative braking Equipped with BRD circuit (with a discharging resistor separately installed)
      Minimum resistance that
      can be connected (Ω)      		 16 10 10 7.5 7.5
      Dimension Height (mm) 260 260 260 390 390
      Width (mm) 210 210 210 245 245
      Depth (mm) 170 170 170 190 190
      Protective construction IP20 *5 / UL open type
      Approximate mass (kg) 6 6 6 10 10
      3G3RX2-A2[][][][][] A2220 A2300 A2370 A2450 A2550
      Applicable motor
      (4-pole) capacity (kW)      		 VLD 30 37 45 55 75
      LD 30 37 45 55 75
      ND 22 30 37 45 55
      Output Rated output
      current (A)      		 VLD 124 153 185 229 295
      LD 113 140 169 210 270
      ND 95.0 122 146 182 220
      Overload
      current rating      		 VLD 110% 60 sec / 120% 3 sec
      LD 120% 60 sec / 150% 3 sec
      ND 150% 60 sec / 200% 3 sec
      Rated output voltage 3-phase (3-wire) 200 to 240 V (depending on receiving voltage)
      Rated
      capacity
      (kVA)      		 200 V VLD 43.0 53.0 64.1 79.3 102.2
      LD 39.1 48.5 58.5 72.7 93.5
      ND 32.9 42.3 50.6 63.0 76.2
      240 V VLD 51.5 63.6 76.9 95.2 122.6
      LD 47.0 58.2 70.3 87.3 112.2
      ND 39.5 50.7 60.7 75.7 91.5
      Input Rated input
      current (A) *1      		 VLD 147.6 182.1 220.2 272.6 351.2
      LD 134.5 166.7 201.2 250.0 321.4
      ND 113.1 145.2 173.8 216.7 261.9
      Rated input AC voltage Control power supply: Power supply single phase 200 to 240 V/allowable
      variation range 170 to 264 V,
      50 Hz (allowable variation range: 47.5 to 52.5 Hz)/60 Hz (allowable variation
      range: 57 to 63 Hz)
      Main circuit power supply: 3-phase (3-wire) 200 to 240 V/allowable variation
      range 170 to 264 V,
      50 Hz (allowable variation range: 47.5 to 52.5 Hz)/60 Hz (allowable variation
      range: 57 to 63 Hz)
      Power supply
      equipment
      capacity (kVA) *2      		 VLD 56.3 69.4 83.9 103.9 133.8
      LD 51.3 63.5 76.7 95.3 122.5
      ND 43.1 55.3 66.2 82.6 99.8
      Carrier frequency operating
      range *3      		 VLD 0.5 to 10.0 kHz
      LD 0.5 to 12.0 kHz
      ND 0.5 to 16.0 kHz
      Motor start torque *4 200%/0.3 Hz
      Braking Regenerative braking Equipped with BRD circuit
      (with a discharging resistor
      separately installed)      		 Regenerative braking unit separately
      installed
      Minimum resistance that
      can be connected (Ω)      		 5 — — — —
      Dimension Height (mm) 390 540 550 550 700
      Width (mm) 245 300 390 390 480
      Depth (mm) 190 195 250 250 250
      Protective construction IP20 *5 / UL open type
      Approximate mass (kg) 10 22 33 33 47

      *1. The rated input currents shown in the table are the values when the rated current is output. The values vary depending
      on impedance on the power supply (wiring, breaker, input reactor option, etc.)
      *2. The power supply equipment capacities shown in the table are the values when 220 V rated current is output. The values
      vary depending on impedance on the power supply (wiring, breaker, input reactor option, etc.)
      *3. The setting of rated values for carrier frequencies [bb101]/[bb201] are internally limited in accordance with the
      description. Also, it is recommended to set values equivalent to or above (maximum output frequency for driving ×10)
      Hz for the setting of carrier frequencies [bb101]/[bb201]. Also, in the case of induction motor (IM) control, for items
      other than those subject to V/f control, it is recommended to set carrier frequency at 2 kHz or more. In the case of
      synchronous motor (SM)/permanent magnet motor (PMM) control, it is recommended to set carrier frequency at 8 kHz
      or more.
      *4. The value of the sensor-less vector control applied to the ND rating in the Standard motor. Torque characteristics may
      vary depending on the control method and the motor used.
      *5. Based on self declaration.

      3-phase 400-V Class

      Very Low Duty (VLD)/Low Duty (LD)/Normal Duty (ND)

      3G3RX2-[][][][][] A4007 A4015 A4022 A4037 A4055 A4075
      Applicable motor
      (4-pole) capacity (kW)      		 VLD 1.5 2.2 3.7 5.5 7.5 11
      LD 1.5 2.2 3.7 5.5 7.5 11
      ND 0.75 1.5 2.2 3.7 5.5 7.5
      Output Rated output
      current (A)      		 VLD 4.1 5.4 8.3 12.6 17.5 25.0
      LD 3.1 4.8 6.7 11.1 16.0 22.0
      ND 2.5 4.0 5.5 9.2 14.8 19.0
      Overload
      current rating      		 VLD 110% 60 sec / 120% 3 sec
      LD 120% 60 sec / 150% 3 sec
      ND 150% 60 sec / 200% 3 sec
      Rated output voltage 3-phase (3-wire) 380 to 500 V (depending on receiving voltage)
      Rated
      capacity
      (kVA)      		 400 V VLD 2.8 3.7 5.8 8.7 12.1 17.3
      LD 2.1 3.3 4.6 7.7 11.1 15.2
      ND 1.7 2.8 3.8 6.4 10.3 13.2
      500 V VLD 3.6 4.7 7.2 10.9 15.2 21.7
      LD 2.7 4.2 5.8 9.6 13.9 19.1
      ND 2.2 3.5 4.8 8.0 12.8 16.5
      Input Rated input
      current (A) *1      		 VLD 4.9 6.4 9.9 15.0 20.8 29.8
      LD 3.7 5.7 8.0 13.2 19.0 26.2
      ND 3.0 4.8 6.5 11.0 17.6 22.6
      Rated input AC voltage Control power supply: Power supply single phase 380 to 500 V (allowable
      variation range 323 to 550 V),
      50 Hz (allowable variation range: 47.5 to 52.5 Hz)/60 Hz (allowable variation
      range: 57 to 63 Hz)
      Main circuit power supply: 3-phase (3-wire) 380 to 500 V (allowable variation
      range) 323 to 550 V,
      50 Hz (allowable variation range: 47.5 to 52.5 Hz)/60 Hz (allowable variation
      range: 57 to 63 Hz)
      Power supply
      equipment
      capacity (kVA) *2      		 VLD 3.7 4.9 7.5 11.4 15.9 22.7
      LD 2.8 4.4 6.1 10.1 14.5 20.0
      ND 2.3 3.6 5.0 8.3 13.4 17.2
      Carrier frequency range *3 VLD 0.5 to 10.0 kHz
      LD 0.5 to 12.0 kHz
      ND 0.5 to 16.0 kHz
      Motor start torque *4 200%/0.3 Hz
      Braking Regenerative braking Equipped with braking resistance circuit
      (with a discharging resistor separately installed)
      Minimum resistance that
      can be connected (Ω)      		 100 100 100 70 70 35
      Dimen-
      sion      		 Height (mm) 255 255 255 255 260 260
      Width (mm) 150 150 150 150 210 210
      Depth (mm) 140 140 140 140 170 170
      Protective construction IP20 *5 / UL open type
      Approximate mass (kg) 3 3 3 3 6 6
      3G3RX2-[][][][][] A4110 A4150 A4185 A4220 A4300 A4370
      Applicable motor
      (4-pole) capacity (kW)      		 VLD 15 18.5 22 30 37 45
      LD 15 18.5 22 30 37 45
      ND 11 15 18.5 22 30 37
      Output Rated output
      current (A)      		 VLD 31.0 40.0 47.0 62.0 77.0 93.0
      LD 29.0 37.0 43.0 57.0 70.0 85.0
      ND 25.0 32.0 39.0 48.0 61.0 75.0
      Overload
      current rating      		 VLD 110% 60 sec / 120% 3 sec
      LD 120% 60 sec / 150% 3 sec
      ND 150% 60 sec / 200% 3 sec
      Rated output voltage 3-phase (3-wire) 380 to 500 V (depending on receiving voltage)
      Rated
      capacity
      (kVA)      		 400 V VLD 21.5 27.7 32.6 43.0 53.3 64.4
      LD 20.1 25.6 29.8 39.5 48.5 58.9
      ND 17.3 22.2 27.0 33.3 42.3 52.0
      500 V VLD 26.8 34.6 40.7 53.7 66.7 80.5
      LD 25.1 32.0 37.2 49.4 60.6 73.6
      ND 21.7 27.7 33.8 41.6 52.8 65.0
      Input Rated input
      current (A) *1      		 VLD 36.9 47.6 56.0 73.8 91.7 110.7
      LD 34.5 44.0 51.2 67.9 83.3 101.2
      ND 29.8 38.1 46.4 57.1 72.6 89.3
      Rated input AC voltage Control power supply: Power supply single phase 380 to 500 V (allowable
      variation range 323 to 550 V),
      50 Hz (allowable variation range: 47.5 to 52.5 Hz)/60 Hz (allowable variation
      range: 57 to 63 Hz)
      Main circuit power supply: 3-phase (3-wire) 380 to 500 V (allowable variation
      range) 323 to 550 V,
      50 Hz (allowable variation range: 47.5 to 52.5 Hz)/60 Hz (allowable variation
      range: 57 to 63 Hz)
      Power supply
      equipment
      capacity (kVA) *2      		 VLD 28.1 36.3 42.6 56.3 69.9 84.4
      LD 26.3 33.6 39.0 51.7 63.5 77.1
      ND 22.7 29.0 35.4 43.5 55.3 68.0
      Carrier frequency range *3 VLD 0.5 to 10.0 kHz
      LD 0.5 to 12.0 kHz
      ND 0.5 to 16.0 kHz
      Motor start torque *4 200%/0.3 Hz
      Braking Regenerative braking Equipped with braking resistance circuit
      (with a discharging resistor separately installed)
      Minimum resistance that
      can be connected (Ω)      		 35 24 24 20 15 15
      Dimen-
      sion      		 Height (mm) 260 390 390 390 540 550
      Width (mm) 210 245 245 245 300 390
      Depth (mm) 170 190 190 190 195 250
      Protective construction IP20 *5 / UL open type
      Approximate mass (kg) 6 8.5 8.5 8.5 22 31
      3G3RX2-[][][][][] A4450 A4550 B4750 B4900 B411K B413K
      Applicable motor
      (4-pole) capacity (kW)      		 VLD 55 75 90 110 132 160
      LD 55 75 90 110 132 160
      ND 45 55 75 90 110 132
      Output Rated output
      current (A)      		 VLD 116 147 176 213 252 316
      LD 105 135 160 195 230 290
      ND 91.0 112 150 180 217 260
      Overload
      current rating      		 VLD 110% 60 sec / 120% 3 sec
      LD 120% 60 sec / 150% 3 sec
      ND 150% 60 sec / 200% 3 sec
      Rated output voltage 3-phase (3-wire) 380 to 500 V (depending on receiving voltage)
      Rated
      capacity
      (kVA)      		 400 V VLD 80.4 101.8 121.9 147.6 174.6 218.9
      LD 72.7 93.5 110.9 135.1 159.3 200.9
      ND 63.0 77.6 103.9 124.7 150.3 180.1
      500 V VLD 100.5 127.3 152.4 184.5 218.2 273.7
      LD 90.9 116.9 138.6 168.9 199.2 251.1
      ND 78.8 97.0 129.9 155.9 187.9 225.2
      Input Rated input
      current (A) *1      		 VLD 138.1 175.0 209.5 253.6 300.0 376.2
      LD 125.0 160.7 190.5 232.1 273.8 345.2
      ND 108.3 133.3 178.6 214.3 258.3 309.5
      Rated input AC voltage Control power supply: Power supply single phase 380 to 500 V (allowable
      variation range 323 to 550 V),
      50 Hz (allowable variation range: 47.5 to 52.5 Hz)/60 Hz (allowable variation
      range: 57 to 63 Hz)
      Main circuit power supply: 3-phase (3-wire) 380 to 500 V (allowable variation
      range) 323 to 550 V,
      50 Hz (allowable variation range: 47.5 to 52.5 Hz)/60 Hz (allowable variation
      range: 57 to 63 Hz)
      Power supply
      equipment
      capacity (kVA) *2      		 VLD 105.2 133.4 159.7 193.2 228.6 286.7
      LD 95.3 122.5 145.2 176.9 208.7 263.1
      ND 82.6 101.6 136.1 163.3 196.9 235.9
      Carrier frequency range *3 VLD 0.5 to 10.0 kHz 0.5 to 8.0 kHz
      LD 0.5 to 12.0 kHz 0.5 to 8.0 kHz
      ND 0.5 to 16.0 kHz 0.5 to 10.0 kHz
      Motor start torque *4 200%/0.3 Hz 180%/0.3 Hz
      Braking Regenerative braking Regenerative braking unit separately installed
      Minimum resistance that
      can be connected (Ω)      		 10 10 — — — —
      Dimen-
      sion      		 Height (mm) 550 550 700 700 740 740
      Width (mm) 390 390 390 390 480 480
      Depth (mm) 250 250 270 270 270 270
      Protective construction IP20 *5 / UL open type IP00 / UL open type
      Approximate mass (kg) 31 31 41 41 53 53

      *1. The rated input currents shown in the table are the values when the rated current is output. The values vary depending
      on impedance on the power supply (wiring, breaker, input reactor option, etc.)
      *2. The power supply equipment capacities shown in the table are the values when 220 V rated current is output. The values
      vary depending on impedance on the power supply (wiring, breaker, input reactor option, etc.)
      *3. The setting of rated values for carrier frequencies [bb101]/[bb201] are internally limited in accordance with the
      description. Also, it is recommended to set values equivalent to or above (maximum output frequency for driving ×10)
      Hz for the setting of carrier frequencies [bb101]/[bb201]. Also, in the case of induction motor (IM) control, for items
      other than those subject to V/f control, it is recommended to set carrier frequency at 2 kHz or more. In the case of
      synchronous motor (SM)/permanent magnet motor (PMM) control, it is recommended to set carrier frequency at 8 kHz
      or more.
      *4. The value of the sensor-less vector control applied to the ND rating in the Standard motor. Torque characteristics may
      vary depending on the control method and the motor used.
      *5. Based on self declaration.

      Function Specifications

      Inverter 3G3RX2

      Item Specifications
      Control mode
      (output to the motor)      		 Sine wave PWM control voltage output (line sine wave modulation)
      Output frequency range *1 0.00 to 590.00 Hz
      Frequency accuracy Digital command ±0.01% and analog command ±0.2% (25°C±10°C) against the
      maximum frequency
      Frequency resolution Digital setting: 0.01 Hz
      Analog setting: maximum frequency/4000
      (Ai1 terminal/Ai2 terminal: 12 bit/0 to +10 V or 0 to +20 mA, Ai3 terminal 12 bit/
      -10 to +10 V)
      Control mode
      (frequency/voltage calculation) *2      		 IM V/f control (fixed torque/reduced torque/free),
      automatic boost control, cascade model
      sensorless vector control, 0 Hz range
      sensorless vector control, vector control with
      sensor.
      SM/PMM Synchronous starting sensorless vector
      control, IVMS starting smart sensorless vector
      control
      Speed fluctuation *3 ±0.5% (during sensorless vector control)
      Acceleration or deceleration time 0.00 to 3600.00 sec (linear, S-shaped, U-shaped, reverse U-shaped, EL-S
      shaped)
      Display monitor Output frequency, output current, output torque, trip history, I/O terminal status,
      I/O power *4, P-N voltage.
      Starting functions Start after DC braking, frequency collection start, frequency entrainment start,
      reduced voltage start, retry start
      Stopping functions Free-run stop, DC braking after deceleration stop or terminal DC braking (braking
      power, operating speed adjustment)
      Stall prevention function Overload restraining function, overcurrent suppression function, overvoltage
      suppression function
      Protective function *5 Overcurrent error, Motor overload error, Braking resister Overload error,
      Overvoltage error, Memory error, Undervoltage error, Current detector error, CPU
      error, External trip error, USP error, Ground fault error, Incoming over voltage
      error, Instantaneous power failure error, Temperature detector error, Cooling fan
      rotation speed reduction temperature error, Temperature error, Input open-phase
      error, IGBT error, Output open-phase error, Thermistor error, Brake error, Low-
      speed range overload error, Controller overload error, RS485 communication
      error, Operator keypad disconnection error.
      Other functions V/f free settings (7 points), Upper/lower limit frequency limiter, Frequency jump,
      Curve acceleration/deceleration, Manual torque boost, Energy-saving operation,
      Analog output adjustment function, Minimum frequency, Carrier frequency
      adjustment, Motor electronic thermal function (free setting is also possible),
      Inverter electronic thermal function, External start/end (volume/ratio), Frequency
      input selection, Trip retry, Restart after instantaneous stop, Output of signals,
      Initialization settings, PID control, Automatic deceleration at power shut-off, Brake
      control function, and Auto-tuning for commercial switching function (online/offline).
      Input Fre-
      quency
      setting      		 Standard
      operator
      keypad      		 Parameter setting using arrow keys
      External
      signals *6      		 Ai1/Ai2 terminal (when changing
      voltage)      		 Setting through input of 0 to 10 VDC voltage
      (input impedance: 10 kΩ)
      Ai1/Ai2 terminal (when changing
      current)      		 Setting through input of 0 to 20 mA current
      (input impedance: 100 Ω)
      Ai3 terminal Setting through input of -10 to +10 V voltage
      (input impedance: 10 kΩ)
      Multistage speed terminal (use
      of input terminal function)      		 15 speed
      Pulse string input
      (A/B terminal, use of input
      terminal function)      		 32 kHz × 2 at maximum
      External port Setting via RS485 serial communication (protocol: Modbus-RTU)
      Normal
      rotation/
      reverse
      rotation
      Run/stop      		 Standard
      operator
      keypad      		 Execution with the RUN /STOP key
      (normal rotation/reverse rotation can be switched by setting parameters)
      External
      signals      		 Normal rotation operation (FW)/reverse rotation (RV) (when an input terminal
      function is assigned) 3-wire input available (when an input terminal function is
      assigned)
      External port Setting via RS485 serial communication (protocol: Modbus-RTU (maximum:
      115.2 kbps)
      Input terminal function 11 terminals (input of pulse string is available on terminal A and B)
      FW (Normal rotation)/RV (Reverse rotation), CF1-4 (Multistage speed 1-4), SF1-7
      (Multistage speed bit 1-7), ADD (Addition of frequency), SCHG (Switching of
      frequency command), STA (3-wire start)/STP (3-wire stop)/F_R (3-wire normal/
      reverse), AHD (Retention of analog command), FUP (Increase of speed via
      remote operation/FDN (Deceleration via remote operation), UDC (Deletion of data
      via remote operation), F-OP (Forced command switching), SET (Second control),
      RS (Reset), JG (Jogging), DB (External current braking), 2CH (2-stage
      acceleration/deceleration), FRS (Free-run stop), EXT (External abnormality), USP
      (Prevention of restart after restoration of power), CS (Commercial switching), SFT
      (Soft-lock), BOK (Brake check), OLR (Overload restriction switching), KHC
      (Clearance of integrated input power), OKHC (Clearance of integrated output
      power), PID (PID1 disabled), PIDC (PID1 integration reset), PID2 (PID2 disabled),
      PIDC2 (PID2 integration reset), SVC1-4 (PID1 multistage target values 1-4), PRO
      (PID gain switching), PIO (PID output switching), SLEP (SLEEP condition
      satisfied)/WAKE (WAKE condition satisfied), TL (Torque restriction enabled),
      TRQ1, 2 (Switching of torque limit 1, 2), PPI (Switching of P/PI control), CAS
      (Switching of control gain), FOC (Preparatory excitation), ATR (Torque control
      enabled), TBS (Torque bias enabled), LAC (Cancellation of acceleration/
      deceleration), Mi1-11 (General-purpose input 1-11), PCC (Clearance of pulse
      counter), ECOM (Start of EzCOM), PRG (Program run), HLD (Acceleration/
      deceleration stop), REN (Operation permission signal), PLA (Pulse string input
      A), and PLB (Pulse string input B)
      Backup power supply
      terminal      		 P+/P-: DC24V input (allowable input voltage: 24 V±10%)
      STO input terminal 2 terminals (simultaneous input)
      Thermistor input terminal 1 terminal (possible to switch between positive temperature coefficient/negative
      temperature coefficient resistance element)
      Output Output terminal
      function      		 Transistor output 5 terminal, 1a contact relay 1 point, 1c contact relay 1 point
      RUN (During operation), FA1-5 (Reached signal), IRDY (Operation ready
      completion), FWR (During normal rotation operation), RVR (During reverse
      rotation operation), FREF (Frequency command operator keypad), REF
      (Operation command operator keypad), SETM (Second control under selection),
      AL (Alarm signal), MJA (Severe failure signal), OTQ (Over torque) *7, IP (During
      instantaneous power failure), UV (Under insufficient voltage), TRQ (During torque
      limitation), IPS (During power failure deceleration), RNT (RUN time over), ONT
      (Power on time over), THM (Electronic thermal warning), THC (Electronic thermal
      warning), WAC (Capacitor life advance notice), WAF (Fan life advance notice), FR
      (Operation command signal), OHF (Cooling fin heating advance notice), LOC/
      LOC2 (Low-current signal), OL/OL2 (Overload advance notice), BRK (Brake
      release), BER (Brake abnormality), ZS (Zero-speed detection signal), OD/OD2
      (PID deviation excessive), FBV/FBV2 (PID feedback comparison), NDc
      (Communication disconnection), Ai1Dc/Ai2Dc/Ai3Dc (Analog disconnection Ai1/
      Ai2/Ai3), WCAi1/WCAi2/WCAi3 (Window comparator Ai1/Ai2/Ai3), LOG1-7
      (Logical operation result 1-7), MO1-7 (General output 1-7), and OVS (Receiving
      overvoltage).
      Relay and alarm relay
      (16, AL)
      EDM output terminal Output for STO diagnosis
      Monitor output terminal
      *8      		 Possible to output through selection from monitor data of parameters
      EMC filter switching *9 Possible to enable the EMC noise filter (switching method is different depending
      on the model)
      External access to PC USB Micro-B
      Use
      environ-
      ment      		 Ambient temperature
      *10      		 ND (normal duty) -10 to 50°C
      LD (low duty) -10 to 45°C
      VLD (very low duty) -10 to 40°C
      Storage temperature
      *11      		 -20 to 65°C
      Humidity 20-90%RH (location free of condensation)
      Vibration *12 5.9 m/s2 (0.6 G) 10 to 55 Hz: 3G3RX2-A2004 to A2220 / 3G3RX2-A4007 to A4220
      2.94 m/s2 (0.3 G) 10 to 55 Hz: 3G3RX2-A2300 to A2550 / 3G3RX2-A4300 to
      A413K
      Use location *13 1000 m altitude or lower (location free from corrosive gas, oil mist, and dust)
      Expected Life time Smoothing capacitor 10 years
      Designed life of cooling fan 10 years (models equipped with a cooling fan) free
      from dust
      Memory element on the control circuit board
      Applicable standards *14 Compliance with UL/cUL/CE standards, RCM, Functional Safety SIL3/PLe
      Painting color Black
      Operating, display LCD Operator *15
      Number of option slots 3 ports
      Other options Braking resistor, AC reactor, DC reactor, noise filter

      *1. The output frequency range depend on the control and motor used. When running the inverter exceeding 60 Hz, check
      the maximum allowable frequency with the manufacturer of the motor.
      *2. When the control mode is changed, unless the motor constant is appropriately configured, you cannot obtain the desired
      starting torque or the inverter may trip.
      *3. The variable range of motor speed may vary depending on your system or the environment where the motor is used.
      Please contact us for details.
      *4. Both the input power and output power are reference values, which are not appropriate for use in calculation of efficiency
      values, etc. To obtain an accurate value, use an external device.
      *5. The IGBT error [E030] is generated by the protective function not only for short circuit protection but also when IGBT is
      damaged. Depending on the operating conditions of the inverter, the overcurrent error [E001] may occur, instead of the
      IGBT error.
      *6. At the factory default setting, when voltage and current on Ai1/Ai2 terminal is changed using a switch, with input of
      voltage at 9.8 V and current at 19.8 mA, the maximum frequency is commanded. To change characteristics, make
      adjustments using the analog start/end function.
      *7. The threshold for signal output varies depending on the motor to be combined with the inverter, parameter adjustment,
      etc.
      *8. The output data of analog voltage monitor and analog current monitor are reference values for connecting an analog
      meter. Due to the meter to be connected and variation in analog output circuit, the maximum output value may slightly
      vary from 10 V or 20 mA. To change characteristics, make adjustments using the Ao1 adjustment and Ao2 adjustment
      functions. Some monitor data cannot be output.
      *9. To enable the EMC filter, connect with a power supply grounded at a neutral point. Otherwise, the leakage current may
      increase.
      *10. Use the 400 V class inverter at an input voltage of 500 VAC or below. If input voltage exceeds 500 VAC due to
      fluctuation of power, use the inverter at 40°C or lower ambient temperature.
      *11. The storage temperature is the temperature during transport.
      *12. To be in accordance with the testing method specified in JIS C 60068-2-6: 2010 (IEC 60068-2-6:2007)
      *13. When the inverter is used in a location at 1000 m or higher altitude, air pressure reduces approximately 1% every 100
      m elevation. Perform 1% current der- ating and conduct evaluation for every 100 m elevation.
      *14. For insulation distance, comply with UL and CE standards
      *15. When a clock function is used, the optional battery (CR2032, 3 V) is required. When you purchase, this LCD operator
      does not come with the battery.

      ขนาน | Motion Drive Inverter – 3G3RX2

      Inverter 3G3RX2

      3G3RX2-A2004
      3G3RX2-A2007
      3G3RX2-A2015
      3G3RX2-A2022
      3G3RX2-A2037
      3G3RX2-A4007
      3G3RX2-A4015
      3G3RX2-A4022
      3G3RX2-A4037

      3G3RX2 Dimensions 2

      3G3RX2-A2055
      3G3RX2-A2075
      3G3RX2-A2110
      3G3RX2-A4055
      3G3RX2-A4075
      3G3RX2-A4110

      3G3RX2 Dimensions 3

      3G3RX2-A2150
      3G3RX2-A2185
      3G3RX2-A2220
      3G3RX2-A4150
      3G3RX2-A4185
      3G3RX2-A4220

      3G3RX2 Dimensions 4

      3G3RX2-A2300
      3G3RX2-A4300

      3G3RX2 Dimensions 5

      3G3RX2-A2370
      3G3RX2-A2450
      3G3RX2-A4370
      3G3RX2-A4450
      3G3RX2-A4550

      3G3RX2 Dimensions 6

      3G3RX2-A2550

      3G3RX2 Dimensions 7

      3G3RX2-B4750
      3G3RX2-B4900

      3G3RX2 Dimensions 8

      3G3RX2-B411K
      3G3RX2-B413K

      3G3RX2 Dimensions 9

      คุณสมบัติ | Motion Drive Inverter – 3G3RX2

      อินเวอร์เตอร์อเนกประสงค์คุณภาพสูงง่ายในติดตั้งและเปลี่ยนแปลง

      • มี EMC Filter ติดตั้งมาแล้ว
      • ตั้งค่าและเข้าถึงได้ง่ายผ่านจอ LCD
      • รองรับการเขียนโปรแกรมควบคุมลำดับโดยไม่ต้องใช้ PLC
      • มีช่วงกำลังมอเตอร์ให้เลือกควบคุมถึง 3 เท่า
      • รองรับการควบคุมแม่เหล็กถาวร

      ข้อมูลจำเพาะ | Motion Drive Inverter – 3G3RX2

      Inverter 3G3RX2
      3 เฟรส 400 โวลต์ เอาต์พุต 0.75-160 กิโลวัตต์
      รองรับโหมดความคุมความเร็ว
      รอบรับโหมดการควบแบบเวคเตอร์โดยใช้และไม่ใช้เซนเซอร์
      รูปแบบสัญญาณอินพุต การตั้งค่าความถี่
      คำสั่งหมุนทวนเข็ม / ตามเข็ม
      คำสั่ง Start / Stop
      มัลติฟังก์ชันอินพุต
      เทอร์มิสเตอร์อินพุต
      อินพุตจำลอง
      รูปแบบสัญญาณเอาต์พุต มัลติฟังก์ชันเอาต์พุต
      รีเลย์เอาต์พุต
      มอนิเตอร์เอาต์พุต

      ติดต่อแผนก Automation & Robots

      Automation Department