OMRON Photoelectric Sensor - ZX-L-N series
OMRON Photoelectric Displacement Sensor – ZX-L-N series
Model Numbers | Photoelectric Displacement Sensor – ZX-L-N series
เซนเซอร์
หัวเซ็นเซอร์ (Reflective)
| ระบบออปติกคอล | รูปร่างลำแสง | ระยะตรวจจับ | ความละเอียด*1 | รุ่นสินค้า |
|---|---|---|---|---|
| Diffuse reflective | ลำแสงแบบจุด | 40 ± 10 มม. | 2 ไมโครเมตร | ZX-LD40 |
| 100 ± 40 มม. | 16 ไมโครเมตร | ZX-LD100 | ||
| 300 ± 200 มม. | 300 ไมโครเมตร | ZX-LD300 | ||
| ลำแสงแบบเส้น | 40 ± 10 มม. | 2 ไมโครเมตร | ZX-LD40L | |
| 100 ± 40 มม. | 16 ไมโครเมตร | ZX-LD100L | ||
| 300 ± 200 มม. | 300 ไมโครเมตร | ZX-LD300L | ||
| Regular reflective | ลำแสงแบบจุด | 30 ± 2 มม. | 0.25 ไมโครเมตร | ZX-LD30V |
| ลำแสงแบบเส้น | ZX-LD30VL |
- สำหรับการนับเฉลี่ยอยู่ที่4,096
หัวเซ็นเซอร์ (Through-beam)
| ระบบออปติกคอล | ความกว้างของการวัด | ระยะตรวจจับ | ความละเอียด*1 | รุ่นสินค้า*2 |
|---|---|---|---|---|
| Through-beam | 1 มม. | 0 to 500 มม. | 4 ไมโครเมตร | ZX-LT001 |
| 1 ถึง 2 มม. | 500 to 2000 มม. | — | ||
| 5 มม. | 0 to 500 มม. | 4 ไมโครเมตร | ZX-LT005 | |
| 10 มม. | ZX-LT010 | |||
| 30 มม. | 12 ไมโครเมตร | ZX-LT030 0.5M |
- สำหรับการนับเฉลี่ยอยู่ที่ 64
- สายทุกรุ่นยาว 0.5 ม.
หน่วย แอมพลิฟายเออร์
| ลักษณะ | แหล่งจ่ายไฟ | ประเภทเอาต์พุต | รุ่นสินค้า |
|---|---|---|---|
 |
DC | NPN | ZX-LDA11-N 2M |
| PNP | ZX-LDA41-N 2M |
หมายเหตุ : การเชื่อมต่อที่เข้ากันได้กับหัวเซนเซอร์
อุปกรณ์เสริม (แยกจำหน่าย)
หน่วย คำนวณ
| ลักษณะ | รุ่น |
|---|---|
 |
ZX-CAL2 |
อุปกรณ์ติดตั้งด้านข้าง
| ลักษณะ | หัวเซนเซอร์ที่ใช้งานได้ | รุ่นสินค้า | ปริมาณ |
|---|---|---|---|
 |
ZX-LT1001/ LT005 | ZX-XF12 | 1 |
| ZX-LT010 | ZX-XF22 |
เครื่องมือบันทึกสำหรับคอมพิวเตอร์ส่วนบุคคล
| ลักษณะ | รายการ | รุ่นสินค้า |
|---|---|---|
 |
หน่วยเชื่อมต่อการสื่อสาร (RS-232C) | ZX-SF11 |
 |
Smart Monitor *3 (Logging Software + Function Setting Software) | ZX-SW11EV3 *1 |
เครื่องมือติดตั้งสำหรับคอมพิวเตอร์ส่วนบุคคล
| ลักษณะ | รายการ | รุ่นสินค้า |
|---|---|---|
 |
หน่วยเชื่อมต่อการสื่อสาร (RS-232C) + Smart Monitor Basic * 2 * 3 (Function Setting Software) | ZX-SFW11EV3 *1 |
- ต้องใช้ ZX-SFW11EV3 หรือ ZX-SW11EV3 เพื่อใช้ Smart Monitor กับZX-LDA11-N/41-N ไม่สามารถใช้เวอร์ชั่นก่อน
- Smart Monitor Basic ไม่มีฟังก์ชันการบันทึก นอกเหนือจากฟังกชันการบันทึกแล้ว Smart Monitor Basic ยังรองรับฟังก์ชันเดียวกับ Smart Monitor
- ห้ามคัดลอกทำซ้ำและแจกจ่ายบางส่วนหรือทั้งหมดของเอกสารนี้โดยไม่ได้รับอนุญาตจาก OMRON โคโปเรชั่น
สายเคเบิลที่มีขั้วต่อที่ปลายทั้งสองข้าง (สำหรับเพิ่มเติม) *1
| ความยาวสาย | รุ่น | ปริมาณ |
|---|---|---|
| 1 m | ZX-XC1A 1M | 1 |
| 4 m | ZX-XC4A 4M | |
| 8 m | ZX-XC8A 8M | |
| 9 m *2 | ZX-XC9A 9M |
- นอกจากนี้ยังมีรุ่นสายหุ่นยนต์ หมายเลขรุ่นคือ ZX-XC[]R
- สำหรับใช้กับเซนเซอร์ Reflective Sensors เท่านั้น
Bank Unit
| Appearance | Model |
|---|---|
 |
ZX-SB11 |
Specifications | Photoelectric Displacement Sensor – ZX-L-N series
Sensor Heads (Reflective)
| Model | ZX-LD40 | ZX-LD100 | ZX-LD300 | ZX-LD30V | ZX-LD40L | ZX-LD100L | ZX-LD300L | ZX-LD30VL |
|---|---|---|---|---|---|---|---|---|
| Optical system | Diffuse reflective | Regular reflective | Diffuse reflective | Regular reflective | ||||
| Light source (wave length) |
Visible-light semiconductor laser with a wavelength of 650 nm and an output of 1 mW max. | |||||||
| EN class 2, FDA class II | ||||||||
| Measurement point |
40 mm | 100 mm | 300 mm | 30 mm | 40 mm | 100 mm | 300 mm | 30 mm |
| Measurement range |
± 10 mm | ± 40 mm | ± 200 mm | ± 2 mm | ± 10 mm | ± 40 mm | ± 200 mm | ± 2 mm |
| Beam shape | Spot | Line | ||||||
| Beam size*1 | 50-μm dia. | 100-μm dia. | 300-μm dia. | 75-μm dia. | 75 μm x 2 mm | 150 μm x 2 mm | 450 μm x 2 mm | 100 μm x 1.8 mm |
| Resolution*2 | 2 μm | 16 μm | 300 μm | 0.25 μm | 2 μm | 16 μm | 300 μm | 0.25 μm |
| Linearity*3 | ± 0.2% FS (entire range) |
± 0.2% FS (80 to 120 mm) |
± 2% FS (200 to 400 mm) |
± 0.2% FS (entire range) |
± 0.2% FS (32 to 48 mm) |
± 0.2% FS (80 to 120 mm) |
± 2% FS (200 to 400 mm) |
± 0.2% FS (entire range) |
| Temperature characteristic*4 |
± 0.03% FS/°C (Except for ZX-LD300 and ZX-LD300L, which are ± 0.1% FS/°C.) | |||||||
| Ambient temperature |
Incandescent lamp: 3,000 l× max. (on light receiving side) | |||||||
| Ambient illumination |
Operating: 0 to 50°C, Storage: -15 to 60°C (with no icing or condensation) | |||||||
| Ambient humidity |
Operating and storage: 35% to 85% (with no condensation) | |||||||
| Insulation resistance |
20 MΩ min. at 500 VDC | |||||||
| Dielectric strength |
1,000 VAC, 50/60 Hz for 1 min | |||||||
| Vibration resistance (destruction) |
10 to 150 Hz, 0.7-mm double amplitude 80 min each in X, Y, and Z directions | |||||||
| Shock resistance (destru ction) |
300 m/s2 3 times each in six directions (up/down, left/right, forward/backward) | |||||||
| Degree of protection |
IEC60529, IP50 | IEC60529, IP40 | IEC60529, IP50 | IEC60529, IP40 | ||||
| Connection method |
Connector relay (standard cable length: 500 mm) | |||||||
| Weight (packed state) |
Approx. 150 g | Approx. 250 g | Approx. 150 g | Approx. 250 g | ||||
| Materials | Case: PBT (polybutylene terephthalate), Cover: Aluminum, Lens: Glass |
Case and cover: Aluminum, Lens: Glass |
Case: PBT (polybutylene terephthalate), Cover: Aluminum, Lens: Glass |
Case and cover: Aluminum, Lens: Glass |
||||
| Accessories | Instruction sheet, Laser warning label (English) | |||||||
- Beam size: The beam size is defined by 1/e2 (13.5%) of the strength of the beam at the beam center (measured value). Incorrect detection may occur if there is light leakage outside the defined spot and the material around the sensing object is more reflective than the sensing object.
- Resolution: The resolution is the deviation (±3σ) in the linear output when connected to the ZX-LDA Amplifier Unit. (The resolution is measured with the standard reference object (white ceramic), at the measurement point with the ZX-LDA set for an average count of 4,096 per period.)
The resolution is given at the repeat accuracy for a stationary workpiece, and is not an indication of the distance accuracy. The resolution may be adversely affected under strong electromagnetic fields. - Linearity: The linearity is given as the error in an ideal straight line displacement output when measuring the standard reference object. The linearity and measurement values vary with the object being measured.
- Temperature characteristic: The temperature characteristic is measured at the measurement point with the Sensor and reference object (OMRON’s standard reference object) secured with an aluminum jig. Note: Highly reflective objects can result in incorrect detection by causing out-of-range measurements.
Sensor Heads (Through-beam)
| Model | ZX-LT001 | ZX-LT005 | ZX-LT010 | ZX-LT030 | ||
|---|---|---|---|---|---|---|
| Optical system | Through-beam | |||||
| Light source (wave length) |
Visible-light semiconductor laser with a wavelength of 650 nm | |||||
| EN class 1, FDA class II | ||||||
| Light source (wave length) | Maximum output |
0.2 mW max. | 0.35 mW max. | 0.2 mW max. | ||
| Measurement width | 1-mm dia. | 1- to 2.5-mm dia. | 5 mm | 10 mm | 30 mm | |
| Measurement distance | 0 to 500 mm | 500 to 2,000 mm | 0 to 500 mm | |||
| Minimum sensing object | 8-μm dia. (opaque) | 8- to 50-μm dia. (opaque) | 0.05-mm dia. (opaque) | 0.1-mm dia. (opaque) | 0.3-mm dia. (opaque) | |
| Resolution*1 | 4 μm*2 | — | 4 μm*3 | 12 μm*4 | ||
| Temperature characteristic |
±0.2% FS/°C | ±0.3% FS/°C | ||||
| Ambient illumination | Incandescent lamp: 10,000 l× max. (on light-receiving side) | |||||
| Ambient temperature | Operating: 0 to 50°C, Storage: -25 to 70°C (with no icing or condensation) | |||||
| Ambient humidity | Operating: 35% to 85% (with no condensation) | |||||
| Degree of protection | IEC60529, IP40 | |||||
| Connection method | Connector relay (standard cable length: 500 mm) | |||||
| Weight (packed state) | Approx. 220 g | Approx. 450 g | ||||
| Cable length | Extendable up to 10 m with special extension cable. | |||||
| Materials | Case | Polyether imide | Zinc die-cast | |||
| Cover | Polycarbonate | |||||
| Front filter | Glass | |||||
| Tightening torque | 0.3 Nm max. | |||||
| Accessories | Instruction sheet, Sensor Head-Amplifier Connection Cable | |||||
| Optical axis adjustment seal | Mounting Bracket | |||||
- This value is obtained by converting the deviation (±3σ) in the linear output that results when the sensor head is connected to the amplifier unit, into the measurement width.
- For an average count of 64. The value is 5 μm for an average count of 32. This is the value that results when a minimum sensing object blocks the light near the center of the 1-mm measurement width.
- For an average count of 64. The value is 5 μm for an average count of 32.
- For an average count of 64. The value is 15 μm for an average count of 32.
Amplifier Units
| Model | ZX-LDA11-N | ZX-LDA41-N |
|---|---|---|
| Measurement period *1 | 150 μs | |
| Possible average count settings |
1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1,024, 2,048, or 4,096 | |
| Temperature characteristic | When connected to a Reflective Sensor Head: 0.01% FS/°C, When connected to a Through-beam Sensor Head: 0.1% FS/°C |
|
| Linear output *2 | Current output: 4 to 20 mA/FS, Max. load resistance: 300 Ω Voltage output: ±4 V (± 5 V, 1 to 5 V *3), Output impedance: 100 Ω |
|
| Judgement outputs (3 outputs: HIGH/PASS/LOW) *1 |
NPN open-collector outputs, 30 VDC, 50 mA max. Residual voltage: 1.2 V max. |
PNP open-collector outputs, 30 VDC, 50 mA max. Residual voltage: 2 V max. |
| Laser OFF input, zero reset input, timing input, reset input |
ON: Short-circuited with 0-V terminal or 1.5 V or less OFF: Open (leakage current: 0.1 mA max.) |
ON: Supply voltage short-circuited or supply voltage within 1.5 V OFF: Open (leakage current: 0.1 mA max.) |
| Functions | Measurement value display, present value/set value/light level/resolution display, scaling, display reverse, display OFF mode, ECO mode, number of display digit changes, sample hold, peak hold, bottom hold, peak-to- peak hold, self-peak hold, self-bottom hold, average hold, delay hold, intensity mode, zero reset, initial reset, ON-delay timer, OFF-delay timer, one-shot timer, deviation, previous value comparison, sensitivity adjustment, keep/clamp switch, direct threshold value setting, position teaching, 2-point teaching, automatic teaching, hysteresis width setting, timing inputs, reset input, monitor focus, linear output compensation, (A-B) calculations14, (A+B) calculations*4, mutual interference*4, laser deterioration detection, zero reset memory, zero reset display, key lock |
|
| Indications | Operation indicators: High (orange), pass (green), low (yellow), 7-segment main display (red), 7-segment subdisplay (yellow), laser ON (green), zero reset (green), enable (green) |
|
| Power supply voltage | 12 to 24 VDC ± 10%, Ripple (p-p): 10% max. | |
| Current consumption | 140 mA max. with power supply voltage of 24 VDC (with Sensor connected) | |
| Ambient temperature | Operating and storage: 0 to 50°C (with no icing or condensation) | |
| Ambient humidity | Operating and storage: 35% to 85% (with no condensation) | |
| Insulation resistance | 20 MΩ min. at 500 VDC | |
| Dielectric strength | 1,000 VAC, 50/60 Hz for 1 min | |
| Vibration resistance (destruction) |
10 to 150 Hz, 0.7-mm double amplitude 80 min each in X, Y, and Z directions | |
| Shock resistance (destruction) |
300 m/s2 3 times each in six directions (up/down, left/right, forward/backward) | |
| Connection method | Prewired (standard cable length: 2 m) | |
| Weight (packed state) | Approx. 350 g | |
| Materials | Case: PBT (polybutylene terephthalate), Cover: Polycarbonate | |
| Accessories | Instruction sheet | |
- The response time for the first linear output or judgment output is calculated as follows (with fixed sensitivity): Measurement period × (Average count setting + 1). The response time for the second and later outputs is the measurement period specified in the table.
- The output can be switched between a current output and voltage output using a switch on the bottom of the Amplifier Unit.
- Setting is possible via the monitor focus function.
- A Calculating Unit (ZX-CAL2) is required.
Calculating Unit
| Model | ZX-CAL2 |
|---|---|
| Applicable Amplifier Units | ZX-LDA11-N/41-N/ZX-EDA11/41/ZX-TDA11/41 |
| Current consumption | 12 mA max. (supplied from the Smart Sensor Amplifier Unit) |
| Ambient temperature | Operating: 0 to 50°C, Storage: -15 to 60°C (with no icing or condensation) |
| Ambient humidity | Operating and storage: 35% to 85% (with no condensation) |
| Connection method | Connector |
| Dielectric strength | 1,000 VAC, 50/60 Hz for 1 min |
| Insulation resistance | 100 MΩ (at 500 VDC) |
| Vibration resistance (destructive) | 10 to 150 Hz, 0.7-mm double amplitude 80 min each in X, Y, and Z directions |
| Shock resistance (destructive) | 300 m/s2 3 times each in six directions (up/down, left/right, forward/backward) |
| Materials | Display: Acrylic, Case: ABS resin |
| Weight (packed state) | Approx. 50 g |
ZX-series Communications Interface Unit
| Item | ZX-SF11 | |
|---|---|---|
| Current consumption | 60 mA max. (supplied by the Amplifier Unit) | |
| Applicable Amplifier Units | ZX Series | |
| Applicable Amplifier Unit versions |
ZX-LDA[]1-N Ver. 2.100 or higher ZX-EDA[]1 Ver. 1.100 or higher ZX-TDA[]1 Ver. 1.000 or higher |
|
| Max. No. of Amplifier Units | 5 (max. 2 with calculating unit) | |
| Commu- nications functions |
Communications port | RS-232C port (9-pin D-Sub Connector) |
| Communications protocol |
CompoWay/F* | |
| Baud rate | 38,400 bps | |
| Data configuration | Data bits: 8, Parity: none, Start bits: 1, Stop bits: 1, Flow control: none | |
| Indicators | Power supply: green, Sensor communications: green, Sensor communications error: red, External terminal communications: green, External terminal communications error: red |
|
| Protective circuits | Reverse polarity protection | |
| Ambient temperature | Operating: 0 to 50°C, storage: -15 to 60°C (with no icing or condensation) | |
| Ambient humidity | Operating and storage: 35% to 85% (with no condensation) | |
| Insulation resistance | 20 MΩ min. (at 500 VDC) | |
| Dielectric strength | 1,000 VAC, 50/60 Hz for 1 min, Leakage current: 10 mA max. | |
| Materials | Case: PBT (polybutylene terephthalate), Cover: Polycarbonate | |
| Accessories | Instruction sheet, 2 clamps | |
* Contact your OMRON representative for CompoWay/F communications specifications.
Dimensions | Photoelectric Displacement Sensor – ZX-L-N series
Sensor Heads (Diffuse Reflective)
ZX-LD40 ZX-LD100 ZX-LD300 ZX-LD40L ZX-LD100L ZX-LD300L
Sensor Heads (Regular Reflective)
ZX-LD30V ZX-LD30VL
Sensor Heads (Through-beam)
ZX-LT001 ZX-LT005
ZX-LT010
ZX-LT030
Sensor Head – Amplifier Unit Connection Cable
Amplifier Units
ZX-LDA11-N ZX-LDA41-N
Accessories (Order Separately)
Calculating Unit
ZX-CAL2
Side-view Attachments
ZX-XF12
ZX-XF22
ZX-series Communications Interface Unit
ZX-SF11
Cables with Connectors on Both Ends (for Extension)
ZX-XC1A (1 m)
ZX-XC4A (4 m)
ZX-XC8A (8 m)
ZX-XC9A (9 m)
คุณสมบัติ | Photoelectric Displacement Sensor – ZX-L-N series
ฟังก์ชันอัจฉริยะภายในตัวกล้องขนาดกะทัดรัด พร้อมด้วยเลเซอร์ประเภทเต็มรูปแบบ
คุณสมบัติ | Photoelectric Displacement Sensor – ZX-L-N series
| Photoelectric Displacement Sensor | ZX-L-N |
|---|---|
| ระบบออปติก | Diffuse reflective, Regular reflective |
| จุดวัด | 30, 40, 100, 300 mm |
| รูปร่างลำแสง | แบบจุด, แบบเส้น |
| ความละเอียด | 0.25, 2, 16, 300 ไมโครเมตร |
| ระดับการป้องกัน | IP40, IP50 |
| วัสดุภายนอก | PBT, อลูมิเนียม |
ติดต่อแผนก Automation & Robots
