![OMRON Timer - H3Y-[]-B](https://www.pha-auto.co.th/wp-content/uploads/2023/12/H3Y-B-100x100.webp)
OMRON Timer - H5CZ
OMRON Timer – H5CZ
Model Numbers | Timer – H5CZ
| Type | Time specifications | Operating modes | External connections | Inputs | Outputs | Supply voltage | Models |
|---|---|---|---|---|---|---|---|
| H5CZ | 0.001 to 9.999 s 0.01 to 99.99 s 0.1 to 999.9 s 1 to 9999 s 1 s to 99 min 59 s 0.1 to 999.9 min 1 to 9999 min 1 min to 99 h 59 min 0.1 to 999.9 h 1 to 9999 h |
Timer Mode A: Signal ON Delay I A-1: Signal ON Delay II A-2: Power ON Delay I A-3: Power ON Delay II b: Repeat cycle 1 b-1: Repeat cycle 2 d: Signal OFF Delay E: Interval F: Cumulative Z: ON/OFF-duty- adjustable flicker S: StopwatchTwin Timer Mode toff: Flicker OFF Start 1 ton: Flicker ON Start 1 toff-1: Flicker OFF Start 2 ton-1: Flicker ON Start 2 |
8-pin socket |
Signal, Reset (NPN inputs) |
Contact output (time-limit SPDT) |
100 to 240 VAC | H5CZ-L8 |
| 12 to 24 V AC/DC | H5CZ-L8D | ||||||
| Timer Mode A-2: Power ON Delay I b: Repeat cycle 1 E: Interval Z: ON/OFF-duty-adjustable flickerTwin Timer Mode toff: Flicker OFF Start 1 ton: Flicker ON Start 1 |
None | Contact output (time-limit SPDT + instantaneous SPDT) Models with instantaneous contact outputs * |
100 to 240 VAC | H5CZ-L8E | |||
| 12 to 24 V AC/DC | H5CZ-L8ED |
Note: The functions that are provided depend on the model. Check detailed specifications before ordering.
* A time-limit DPDT output can also be used.
Accessories (Order Separately)
Soft Cover
| Models |
|---|
| Y92A-48F1 |
Hard Cover
| Models |
|---|
| Y92A-48 |
Flush Mounting Adapter
| Models |
|---|
| Y92F-30 |
Waterproof Packing
| Models |
|---|
| Y92S-29 |
Connection Sockets
| Models | Type | Remarks |
|---|---|---|
| P2CF-08 | Front Connecting Socket | — |
| P2CF-08-E | Front Connecting Socket (Finger-safe Type) |
Round crimp terminals cannot be used on Finger-safe Sockets. Use forked crimp terminals. |
| P3G-08 | Back Connecting Socket | A Y92A-48G Terminal Cover can be used with the Socket to create a finger-safe construction. |
Terminal Covers for P3G-08 Back-connecting Sockets
| Models |
|---|
| Y92A-48G |
Specifications | Timer – H5CZ
Ratings
| Models | H5CZ-L8[] | ||
|---|---|---|---|
| Ratings | Power supply voltage *1 | 100 to 240 VAC 50/60 Hz 12 to 24 VDC/24 VAC 50/60 Hz |
|
| Operating voltage fluctuation range | 85% to 110% of rated supply voltage (90% to 110% at 12 to 24 VDC) | ||
| Power consumption | Approx. 6.2 VA at 100 to 240 VAC, Approx. 5.1 VA/2.4 W at 24 VAC/12 to 24 VDC *2 | ||
| Mounting method | Flush mounting, Surface mounting, DIN track mounting | ||
| External connections | 8-pin socket | ||
| Degree of protection | IEC IP66, UL508 Type 4X (indoors) for panel surface only and when Y92S-29 Waterproof Packing is used 4 digits | ||
| Digits | |||
| Time ranges | 0.001 s to 9.999 s, 0.01 s to 99.99 s, 0.1 s to 999.9 s, 1 s to 9999 s, 1 s to 99 min 59 s 0.1 m to 999.9 min, 1 min to 9999 min, 1 min to 99 h 59 min, 0.1 h to 999.9 h, 1 h to 9999 h |
||
| Timer mode | Elapsed time (Up), Remaining time (Down) (selectable) | ||
| Inputs | Input signals | Signal, Reset (no inputs on models with instantaneous contact outputs) |
|
| Input method | No-voltage Input ON impedance: 1 kΩ max. (Leakage current: 12 mA when 0 Ω ) ON residual voltage: 3 V max. OFF impedance: 100 kΩ min. |
||
| Signal, reset | Minimum input signal width: 1 or 20 ms (selectable, same for all input) | ||
| Reset system | Power reset (depending on output mode), External reset, Manual reset, Automatic reset (depending on output mode) |
||
| Power reset | Minimum power-opening time: 0.5 s (except for A-3, b-1, F, ton-1, and toff-1 mode) | ||
| Reset voltage | 10% max. of rated supply voltage | ||
| Sensor waiting time | 250 ms max. (Control output is turned OFF and no input is accepted during sensor waiting time.) | ||
| Output | Output modes | A: Signal ON Delay I, A-1: Signal ON Delay II, A-2: Power ON Delay I, A-3: Power ON Delay II, b: Repeat Cycle 1, b-1: Repeat Cycle 2, d: Signal OFF Delay, E: Interval, F: Cumulative, Z: ON/OFF-duty-adjustable flicker, S: Stopwatch, toff: Flicker OFF Start 1, ton: Flicker ON Start 1, toff-1: Flicker OFF Start 2, ton-1: Flicker ON Start 2 |
|
| Models with Instantaneous Contact Outputs A-2: Power ON Delay I, b: Repeat Cycle 1, E: Interval, Z: ON/OFF-duty-adjustable flicker, toff: Flicker OFF Start 1, ton: Flicker ON Start 1 |
|||
| One-shot output time | 0.01 to 99.99 s | ||
| Control output | 5 A at 250 VAC/30 VDC, resistive load (cos = 1) Minimum applied load: 10 mA at 5 VDC (failure level: P, reference value) Contact materials: AgSnIn |
||
| Display method *3 | LCD; Present value: 10-mm-high characters Set value: 6-mm-high characters |
||
| Memory backup | EEPROM (overwrites: 100,000 times min.) that can store data for 10 years min. | ||
| Operating temperature range | -10 to 55°C (-10 to 50°C if counters are mounted side by side) (with no icing or condensation) | ||
| Storage temperature range | -25 to 70°C (with no icing or condensation) | ||
| Operating humidity range | 25% to 85% | ||
| Front panel color | Light gray (5Y7/1) | ||
*1. Do not use the output from an inverter as the power supply. The ripple must be 20% maximum for DC power.
*2. Inrush current will flow for a short time when the power supply is turned ON.
Inrush Current (Reference Values)
| Voltage | Applied voltage | Inrush current (peak value) | Time |
|---|---|---|---|
| 100 to 240 VAC | 264 VAC | 5.3 A | 0.4 ms |
| 12 to 24 V AC/DC | 26.4 VAC | 6.4 A | 1.4 ms |
| 26.4 VDC | 4.4 A | 1.7 ms |
*3. The display is lit only when the power is ON. Settings and changes are not possible if the power supply is not ON.
Characteristics
| Accuracy of operating time and setting error (including temperature and voltage influences) |
Power-ON start: ±0.01% ±50 ms max. *1 Signal start: ±0.005%±0.03 ms max. *1 If the set value is within the sensor waiting time at startup the control output of the H5CZ will not turn ON until the sensor waiting time passes. |
|
|---|---|---|
| Insulation resistance | 100 MΩ min. (at 500 VDC) between current-carrying terminal and exposed non-current-carrying metal parts, and between non-continuous contacts | |
| Dielectric strength | 2,000 VAC, 50/60 Hz for 1 min between current-carrying metal parts and non-current-carrying metal parts 2,000 VAC, 50/60 Hz for 1 min between power supply and input circuits (H5CZ-L8 only) 2,000 VAC, 50/60 Hz for 1 min between control output, power supply, and input circuits (for all models except H5CZ-L8E[]) 1,000 VAC, 50/60 Hz for 1 min between non-continuous contacts |
|
| Impulse withstand voltage | 5 kV (between power terminals) for 100 to 240 VAC, 1 kV for 24 VAC/12 to 24 VDC 5 kV (between current-carrying terminal and exposed non-current-carrying metal parts) for 100 to 240 VAC 1.5 kV for 24 VAC/12 to 24 VDC |
|
| Noise immunity | ±1.5 kV (between power terminals) and ±600 V (between input terminals (for all models except H5CZ-L8E[])), square-wave noise by noise simulator (pulse width: 100 ns/1 μs, 1-ns rise) | |
| Static immunity | Malfunction: 8 kV Destruction: 15 kV |
|
| Vibration resistance |
Destruction | 10 to 55 Hz with 0.75-mm single amplitude each in three directions for 2 h each |
| Malfunction | 10 to 55 Hz with 0.35-mm single amplitude each in three directions for 10 min each | |
| Shock resistance |
Destruction | 300 m/s2 in three directions, three cycles |
| Malfunction | 100 m/s2 in three directions, three cycles | |
| Life expectancy |
Mechanical | 10,000,000 operations min. (under no load at 1,800 operations/h and ambient temperature of 23°C) |
| Electrical | 100,000 operations min. (5 A at 250 VAC, resistive load at 1,800 operations/h and ambient temperature of 23°C) * 2 | |
| Weight | Approx. 105 g (Timer only) | |
*1. The values are based on the set value.
*2. Refer to Life-test Curve.
Life-test Curve (Reference Values)
A maximum current of 0.15 A can be switched at 125 VDC (cosφ =1) and a maximum current of 0.1 A can be switched if L/R is 7 ms. In both cases, a life of 100,000 operations can be expected.
Applicable Standards
| Approved safety standards | UL508/Listing, UL50 Type 4X for indoor use (enclosure rating), CSA C22.2 No. 14 *1, conforms to EN61812-1 (Pollution degree 2/overvoltage category III) B300 PILOT DUTY 1/4 HP 120 VAC, 1/3 HP, 240 VAC, 5 A resistive load VDE0106/P100 CCC: GB/T 14048.5 Pollution degree 2, Overvoltage category III *2 |
|---|---|
| EMC | (EMI) EN61812-1 Emission Enclosure: EN55011 Group 1 class A Emission AC mains: EN55011 Group 1 class A (EMS) EN61812-1 Immunity ESD: IEC61000-4-2 Immunity RF-interference: IEC61000-4-3 Immunity Burst: IEC61000-4-4 Immunity Surge: IEC61000-4-5 Immunity Conducted Disturbance: IEC61000-4-6 Immunity Voltage Dip/Interruption: IEC61000-4-11 |
*1. The following safety standards apply to H5CZ.
cUL (Listing): Applicable when an OMRON P2CF (-E) Socket is used.
cUR (Recognition): Applicable when any other socket is used.
*2. CCC certification requirements
| Rated operating voltage Ue Rated operating current Ie |
AC-15: Ue: 250 VAC, Ie: 3 A AC-13: Ue: 250 VAC, Ie: 5 A DC-13: Ue: 30 VDC, Ie: 0.5 A |
|---|---|
| Rated insulation voltage | 250 V |
| Rated impulse withstand voltage (altitude: 2,000 m max.) |
4 kV (at 240 VAC) |
| Conditional short-circuit current | 1000 A |
I/O Functions
For details, refer to the timing charts on Data Sheet.
| Inputs * | Start signal | Normally functions to start timing. In modes A-2 and A-3, disable timing. In mode S, starts and stops timing. |
|---|---|---|
| Reset | • Resets present value. (In elapsed time mode, the present value returns to 0; in remaining time mode, the present value returns to the set value.) • Count inputs are not accepted and control output turns OFF while reset input is ON. • Reset indicator is lit while reset input is ON. |
|
| Outputs | Control output (OUT) |
Outputs take place according to designated operating mode when timer reaches corresponding set value. |
* The H5CZ-L8E[] does not have an input.
Dimensions | Timer – H5CZ
Digital Timers
Digital Timers
H5CZ-L8[] (Flush Mounting/Surface Mounting Models)
Dimensions with Flush Mounting Adapter
H5CZ-L8[] (Adapter and Waterproof Packing Ordered Separately)
Panel Cutouts
Panel cutouts areas shown below. (according to DIN43700).
Note: 1. The mounting panel thickness should be 1 to 5 mm.
2. To allow easier operation, it is recommended that Adapters be mounted so that the gap between sides with
hooks is at least 15 mm (i.e., with the panel cutouts separated by at least 60 mm).
3. It is possible to horizontally mount Timers side by side. Attach the Flush Mounting Adapters so that the surfaces
without hooks are on the sides of the Timers. (However, if Timers are mounted side by side, water resistance
will be lost.)
Dimensions with Front Connecting Socket
* These dimensions vary with the type of DIN track (reference value).
Features | Timer – H5CZ
- Three-color display value, red, green, or orange
- Models with Instantaneous Contact Outputs
- 0.001 s to 9999 h, 10 ranges.
- Input NPN, PNP and contact
- all feature a NEMA4X (IP66 equivalent) front panels
Properties | Timer – H5CZ
| Timer | H5CZ |
|---|---|
| Power supply | 100 – 240 Vac (50 – 60 Hz) |
| 24 Vac (50 – 60 Hz) / 12 – 24 Vdc | |
| Input | Signal |
| reset | |
| Reset system | Power reset |
| Output reset | |
| Manually reset | |
| Auto reset | |
| Output | Reset (250 Vac / 30 Vdc 5A) |
| Size (W x L x D) (mm) | 48 x 48 x 84.8 |
| Weight (g) | 105 |
ติดต่อแผนก Automation & Robots
![OMRON Timer - H3Y-[]-B](https://www.pha-auto.co.th/wp-content/uploads/2023/12/H3Y-B.webp)
![OMRON Timer - H3YN-[]-B](https://www.pha-auto.co.th/wp-content/uploads/2023/12/H3YN-B.webp)