SMC – Pin Shift Cylinder

SMC – Pin Shift Cylinder มีทั้งหมด 7 รุ่น แต่ละรุ่นมีขนาด, คุณสมบัติ และการใช้งานที่แตกต่างกันออกไป

Category: SMC

SMC - Pin Shift Cylinder

SMC – For High Precision Positioning: Pin Shift Cylinder CKQG-X2370 / CKQP-X2371

High Precision: Rod end deflection of ±0.1 mm or less
Position reproducibility
Pins for positioning the workpiece provided by the customer can be directly mounted.
Built-in coil scraper
Reduces labor time by integrating the cylinder and guide
Magnetic field resistant auto switches are mountable.

Type	Series	Bore size (mm)	Stroke (mm)
Built-in standard magnet	CKQG-X2370	32, 40, 50	25, 30, 40, 50
Built-in strong magnet	CKQP-X2371	50	30, 50

SMC – Shot Pin Cylinder CKZP

High precision With rod extended
- Deflection of ±0.1 mm or less
- Non-rotational accuracy: ±0.1 mm or less
Positioning repeatability
- Positioning accuracy: ±0.05 mm
- Distance accuracy: ±0.1 mm
High output
- Retract force: 1764 N
- Extending force: 2362 N
Mounting Based on NAAMS Standard (71 mm bore)

Series	Bore size (mm)	Stroke (mm)
CKZP	57, 71	25, 50

SMC – Locating Pin Cylinder MGPL50-X2616

Ideal for pin positioning and locating workpieces
Highly accurate mounting positions Highly accurate positioning is possible even after the cylinder is replaced.
D-P3DWA magnetic field resistant auto switch is available.
Coil scraper is equipped as standard.

Type	Bearing	Series	Action	Bore size (mm)
Locating pin cylinder	Ball bushing	MGPL50-X2616	Double acting	25, 40, 65

SMC – Offset Pin Shift Cylinder CDQ2B-X2839

With high rigidity offset load capacity
High rigidity, High precision, With plate extended: Deflection of ±0.1 mm or less
3 different port location directions can be selected.
Can be mounted from 2 directions
Coil scrapers equipped as standard
Auto switches are mountable.

Type	Series	Bore size (mm)	Stroke (mm)
Offset pin shift cylinder	CDQ2B-X2839	32, 40, 50	25, 50, 75

SMC – Center Lock Unit MA331-X441

The workpiece contact portion of the locating pin can switch from center lock (for locating) to free (for releasing workpieces).
Even if the workpiece is distorted after welding, if the locating pin is set to free, the workpiece can be removed easily from the locating pin.
Locating pin swing angle and rotation angle: 3° ±1°

Series	Action	Handling air pressure
MA331-X441	Double acting	0.2 to 0.7 MPa

Specifications | Centering Unit MACM

Alignment and positioning of transferred workpieces. Contributes to space saving on conveyor lines
Table
- Max. allowable load weight: 1000 kg (MACM10)
- Workpieces can be moved in any direction: forward/backward, right/left, at an angle, and even rotated (360º).
- Ball bearings allow for smooth operation.
- Table centering accuracy ±1 mm or less (Workpiece not loaded)
- Table center movable range Max. ø100 mm (MACM10-50